UCLA, Los Angeles, California, USA
RadiaBeam, Santa Monica, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Wakefields in dielectric structures are a useful tool for beam diagnostics and manipulation with applications including acceleration, shaping, chirping, and THz radiation generation. It is possible to use the produced THz radiation to diagnose the fields produced during the DWA interaction but, to do so, it is necessary to effectively out-couple this radiation to free space for transport to diagnostics such as a bolometer or interferometer. To this end, simulations have been conducted using CST Studio for a 10 GeV beam with FACET-II parameters in a slab-symmetric, dielectric waveguide. Various termination geometries were studied including flat cuts, metal horns, and the "Vlasov antenna". Simulations indicate that the Vlasov antenna geometry is optimal and detailed studies were conducted on a variety of dielectrics including quartz, diamond, and silicon. Multiple modes were excited and coherent Cherenkov radiation (CCR) was computationally generated for both symmetric and asymmetric beams. Finally, we include witness beams to study transport and acceleration dynamics as well as the achievable field gradients.
UCLA, Los Angeles, USA
RadiaBeam, Marina del Rey, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Future plasma acceleration experiments at FACET-II will measure betatron radiation in order to provide single-shot non-destructive beam diagnostics. We discuss three models for betatron radiation: a new idealized particle tracking code with Liénard-Wiechert radiation, a Quasi-Static Particle-in-Cell (PIC) code with Liénard-Wiechert radiation, and a full PIC code with radiation computed via a Monte-Carlo QED Method. Predictions of the three models for the E-310 experiment are presented and compared. Finally, we discuss beam parameter reconstruction from the double differential radiation spectrum.
UCLA, Los Angeles, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Intense beams, such as those in proposed plasma based linear colliders, can not only blow out electrons to form a bubble but can also attract ions towards the beam. This violates the assumption that the ions are stationary on the timescale of the beam, which is a common assumption for shorter and less intense beams. While some research has been done on understanding the physics of ion motion in blowout Plasma Wakefield Accelerators (PWFAs), this research has almost exclusively focused on cylindrically symmetric beams, rather than flat asymmetric emittance beams which are often used in linear colliders in order to minimize beamstrahlung at the final focus. This contribution investigates both analytically and computationally ion motion of a flat beam scenario in order to understand the basic physics as well as how to mitigate emittance growth, beam hosing and quadrupole.
TUXB06
Enrico Fermi Institute, University of Chicago, Chicago, Illinois, USA
UCLA, Los Angeles, USA
Northern Illinois University, DeKalb, Illinois, USA
ANL, Lemont, Illinois, USA
To overcome limits on total acceleration achievable in plasma wakefield accelerators, specially shaped drive beams can be used to increase the transformer ratio, implying that the drive beam deceleration is minimized in comparison with acceleration obtained in the wake. We report the results of a nonlinear PWFA, high transformer ratio experiment using high-charge, longitudinally asymmetric drive beams in a plasma cell. An emittance exchange process is used to generate variable drive current profiles, in conjunction with a long (multiple plasma wavelength) witness beam. The witness beam is energy-modulated by the wakefield, yielding a response that contains detailed spectral information in a single-shot measurement. Using these methods, we generate a variety of beam profiles and characterize the wakefields, directly observing beam-loaded transformer ratios up to 7.8. Further, a spectrally-based current reconstruction technique, validated by 3D particle-in-cell simulations, is introduced to obtain the drive beam profile from the decelerating wakefield data.
UCLA, Los Angeles, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Periodic electron bunch trains spaced at the laser wavelength created via inverse free electron laser (IFEL) bunching can be used to resonantly excite plasmas in the quasi-nonlinear (QNL) regime. The excitation can produce plasma blowout conditions using very low emittance beams despite having a small charge per bunch. The resulting plasma density perturbation is extremely nonlinear locally, but preserves the resonant response of the plasma electrons at the plasma frequency. This excitation can produce plasma blowout conditions using very low emittance beams despite having a small charge per bunch. To match the resonance condition, the plasma wavelength has to be equal to the laser period of a few microns. This corresponds to a high density plasma resulting in extremely large wakefield amplitudes. Matching the beam into such a dense plasma requires an extremely short focusing beta function. We present the beam-plasma interaction using quasi-static particle-in-cell (PIC) simulations and discuss the micro-bunching and focusing mechanism required for this scheme which would be a precursor to the planned experiment, E-317, at SLAC’s FACET-II facility.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
PBPL, Los Angeles, USA
The University of Liverpool, Liverpool, United Kingdom
UCLA has recently constructed SAMURAI, a new radiation bunker and laser infrastructure for advanced accelerator research. In its first phase, we will build a 30 MeV photoinjector with an S-band hybrid gun. The beam dynamics simulation for this beamline showed the generation of the beam with the emittance 2.4 um and the peak current 270 A. FIR-FEL experiments are planned in this beamline. The saturation peak power was expected at 170 MW.
UCLA, Los Angeles, California, USA
Michigan State University, East Lansing, Michigan, USA
Northern Illinois University, DeKalb, Illinois, USA
SLAC, Menlo Park, California, USA
The dielectric wakefield acceleration (DWA) program at FACET produced a multitude of new physics results that range from GeV/m acceleration to the discovery of high field-induced conductivity in THz waves, and beyond, to a demonstration of positron-driven wakes. Here we review the rich program now developing in the DWA experiments at FACET-II. With increases in beam quality, a key feature of this program is extended interaction lengths, near 0.5 m, permitting GeV-class acceleration. Detailed physics studies in this context include beam breakup and its control through the exploitation of DWA structure symmetry. The next step in understanding DWA limits requires the exploration of new materials with low loss tangent, large bandgap, and improved thermal characteristics. Advanced structures with photonic features for mode confinement and exclusion of the field from the dielectric, as well as quasi-optical handling of coherent Cerenkov signals is discussed. Use of DWA for laser-based injection and advanced temporal diagnostics is examined.
UCLA, Los Angeles, California, USA
PBPL, Los Angeles, USA
Electron bunches extracted from magneto-optical traps (MOTs) via femtosecond photo-ionization and electrostatic acceleration can have significantly lower transverse emittance than emissions from traditional metal cathodes. Such MOT cathodes, however, have two drawbacks: the need for multiple trapping lasers and the limit to ~MV/m fields. Designs exist for MOTs which only require one trapping laser. Our RF simulations in High-Frequency Structure Simulator (HFSS) indicate that the cone MOT is the only one compatible with high gradient RF cavities. We present the combination of the two, an RF cavity with a cone-MOT as part of its geometry. It only requires one trapping laser and can use much higher fields. The geometry of the chamber is compatible with a wide range of MOT species, which allows the search for one which is compatible with copper cavities.