IPAC2021 - List of Authors (Golluccio, G.)

Paper	Title	Page
TUPAB378	Superconducting Dipole Magnets for the SIS100 Synchrotron	2401
	F. Kaether, P. Aguar Bartolome, A. Bleile, G. Golluccio, J. Ketter, P. Kosek, F. Kurian, V. Marusov, J.P. Meier, S.S. Mohite, C. Roux, P.J. Spiller, K. Sugita, A. Szwangruber, P.B. Szwangruber, A. Warth, H.G. Weiss GSI, Darmstadt, Germany
	The Facility for Antiproton and Ion Research (FAIR) is currently under construction at GSI Darmstadt, Germany. For its main accelarator, the SIS100 synchrotron, 110 superconducting dipole magnets has been produced and extensively tested. The fast-ramped Nuclotron-type superferric dipoles were manufactured with high effort regarding a precise magnetic field which could be proven by magnetic field measurements with high accuracy. Stable operation conditions at 4.5 K were achieved including an excellent quench behaviour and precise geometrical and electrical properties. An overview on design, production, operation, tests and measurement results will be given.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB378
About •	paper received ※ 19 May 2021 paper accepted ※ 21 June 2021 issue date ※ 10 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB379	Superconducting Magnets for Super-FRS: Production and Testing Status	2405
	H. Müller, A. Chiuchiolo, E.J. Cho, G. Golluccio, F. Greiner, P. Kosek, M. Michels, C. Roux, K. Sugita, V.V. Velonas, M. Winkler GSI, Darmstadt, Germany H. Allain, A. Madur CEA-IRFU, Gif-sur-Yvette, France A. Borceto, G. Drago, G. Valesi ASG, Genova, Italy M. Garcia Escudero, M. Lopez, J. Lucas Elytt Energy, Madrid, Spain G. Riddone, S. Russenschuck CERN, Geneva, Switzerland
	The Super FRS is a two-stage in flight separator to be built next to the site of GSI, Darmstadt, Germany as part of FAIR (Facility for Anti-proton and Ion Research). Its three branches allow to carry out a wide variety of experiments. Due to the large acceptance needed, the magnets of the Super-FRS require a large aperture and therefore only a superconducting solution is feasible. A superferric design was chosen in which the magnetic field is shaped by an iron yoke. For the dipole magnets only the superconducting coils are in a cryostat. These magnets are manufactured by Elytt Energy (Spain). The multiplets, assemblies of quadrupoles and higher order multipole magnets, are completely immersed in a liquid Helium bath. They are being built at ASG (Italy). The first of two first of series multiplets, a short assembly containing 2 magnets, was tested at a dedicated test facility at CERN (Switzerland). The 2nd FoS multiplet, containing 9 magnets, and the FoS dipole will be tested soon. Series production of the multiplets has started. In this paper we will present the status of production and testing of the different superconducting magnets for Super-FRS.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB379
About •	paper received ※ 19 May 2021 paper accepted ※ 31 August 2021 issue date ※ 16 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Superconducting Dipole Magnets for the SIS100 Synchrotron

2401

F. Kaether, P. Aguar Bartolome, A. Bleile, G. Golluccio, J. Ketter, P. Kosek, F. Kurian, V. Marusov, J.P. Meier, S.S. Mohite, C. Roux, P.J. Spiller, K. Sugita, A. Szwangruber, P.B. Szwangruber, A. Warth, H.G. Weiss
GSI, Darmstadt, Germany

The Facility for Antiproton and Ion Research (FAIR) is currently under construction at GSI Darmstadt, Germany. For its main accelarator, the SIS100 synchrotron, 110 superconducting dipole magnets has been produced and extensively tested. The fast-ramped Nuclotron-type superferric dipoles were manufactured with high effort regarding a precise magnetic field which could be proven by magnetic field measurements with high accuracy. Stable operation conditions at 4.5 K were achieved including an excellent quench behaviour and precise geometrical and electrical properties. An overview on design, production, operation, tests and measurement results will be given.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB378

About •

paper received ※ 19 May 2021 paper accepted ※ 21 June 2021 issue date ※ 10 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB379

Superconducting Magnets for Super-FRS: Production and Testing Status

2405

H. Müller, A. Chiuchiolo, E.J. Cho, G. Golluccio, F. Greiner, P. Kosek, M. Michels, C. Roux, K. Sugita, V.V. Velonas, M. Winkler
GSI, Darmstadt, Germany
H. Allain, A. Madur
CEA-IRFU, Gif-sur-Yvette, France
A. Borceto, G. Drago, G. Valesi
ASG, Genova, Italy
M. Garcia Escudero, M. Lopez, J. Lucas
Elytt Energy, Madrid, Spain
G. Riddone, S. Russenschuck
CERN, Geneva, Switzerland

The Super FRS is a two-stage in flight separator to be built next to the site of GSI, Darmstadt, Germany as part of FAIR (Facility for Anti-proton and Ion Research). Its three branches allow to carry out a wide variety of experiments. Due to the large acceptance needed, the magnets of the Super-FRS require a large aperture and therefore only a superconducting solution is feasible. A superferric design was chosen in which the magnetic field is shaped by an iron yoke. For the dipole magnets only the superconducting coils are in a cryostat. These magnets are manufactured by Elytt Energy (Spain). The multiplets, assemblies of quadrupoles and higher order multipole magnets, are completely immersed in a liquid Helium bath. They are being built at ASG (Italy). The first of two first of series multiplets, a short assembly containing 2 magnets, was tested at a dedicated test facility at CERN (Switzerland). The 2nd FoS multiplet, containing 9 magnets, and the FoS dipole will be tested soon. Series production of the multiplets has started. In this paper we will present the status of production and testing of the different superconducting magnets for Super-FRS.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB379

About •

paper received ※ 19 May 2021 paper accepted ※ 31 August 2021 issue date ※ 16 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)