IPAC2021 - List of Authors (Dyakonov, M.V.)

Paper	Title	Page
WEPAB190	DC Break Design for a 2.45 GHz ECR Ion Source	3064
	M.S. Dmitriyev, M.V. Dyakonov, S.A. Tumanov, M.I. Zhigailova MEPhI, Moscow, Russia
	New 2.45 GHz Electron Cyclotron Resonance Ion Source (ECRIS) is under development at NRNU MEPhI. The transmission line is designed for transmitting the microwave power into the ECRIS. A DC break up to 80 kV was designed for the electrical insulation between the microwave supply system and the plasma chamber applied to high DC voltage. Current study considers the investigation results as well as the optimization of numerical simulations of the 2.45 GHz DC break with low losses and low emission into the surrounding space.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB190
About •	paper received ※ 20 May 2021 paper accepted ※ 08 June 2021 issue date ※ 30 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB191	Magnet System for a Proton/helium ECR Ion Source	3066
	M.S. Dmitriyev, K.G. Artamonov, M.V. Dyakonov, M.I. Zhigailova MEPhI, Moscow, Russia
	The study of the magnetic system of ECRIS with operating frequency of 2.45 GHz for producing protons and double-charged helium ions has been carried out. The results of the numerical simulation of the ECRIS magnetic system based on permanent magnets have been performed. The possibility of shifting the ring magnets in both injection and extraction regions is considered to adjust maximum and minimum values of the axial distribution of a magnetic field in a plasma chamber. The possibility of shifting the bar magnets of the hexapole is shown to provide the adjustment of the radial magnetic field Brad at the chamber wall. Additional solenoids are introduced to the system for providing the required Binj and Bext adjustment and tuning the axial magnetic field distribution including the minimum on the axis Bmin. Furthermore, the magnetic system allows to switch the operation mode of the ECR source to the microwave mode.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB191
About •	paper received ※ 20 May 2021 paper accepted ※ 08 June 2021 issue date ※ 26 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

DC Break Design for a 2.45 GHz ECR Ion Source

3064

M.S. Dmitriyev, M.V. Dyakonov, S.A. Tumanov, M.I. Zhigailova
MEPhI, Moscow, Russia

New 2.45 GHz Electron Cyclotron Resonance Ion Source (ECRIS) is under development at NRNU MEPhI. The transmission line is designed for transmitting the microwave power into the ECRIS. A DC break up to 80 kV was designed for the electrical insulation between the microwave supply system and the plasma chamber applied to high DC voltage. Current study considers the investigation results as well as the optimization of numerical simulations of the 2.45 GHz DC break with low losses and low emission into the surrounding space.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB190

About •

paper received ※ 20 May 2021 paper accepted ※ 08 June 2021 issue date ※ 30 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB191

Magnet System for a Proton/helium ECR Ion Source

3066

M.S. Dmitriyev, K.G. Artamonov, M.V. Dyakonov, M.I. Zhigailova
MEPhI, Moscow, Russia

The study of the magnetic system of ECRIS with operating frequency of 2.45 GHz for producing protons and double-charged helium ions has been carried out. The results of the numerical simulation of the ECRIS magnetic system based on permanent magnets have been performed. The possibility of shifting the ring magnets in both injection and extraction regions is considered to adjust maximum and minimum values of the axial distribution of a magnetic field in a plasma chamber. The possibility of shifting the bar magnets of the hexapole is shown to provide the adjustment of the radial magnetic field Brad at the chamber wall. Additional solenoids are introduced to the system for providing the required Binj and Bext adjustment and tuning the axial magnetic field distribution including the minimum on the axis Bmin. Furthermore, the magnetic system allows to switch the operation mode of the ECR source to the microwave mode.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB191

About •

paper received ※ 20 May 2021 paper accepted ※ 08 June 2021 issue date ※ 26 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)