IPAC2021 - List of Authors (Dunkel, K.)

Paper	Title	Page
THPAB178	The SIS100 Extraction and Emergency Kicker Magnet System	4115
	J.H. Hottenbacher, K. Dunkel, M. Eisengruber, M. Osemann, A. Padvi, C. Piel RI Research Instruments GmbH, Bergisch Gladbach, Germany S. Heberer, I.J. Petzenhauser GSI, Darmstadt, Germany
	The extraction and emergency kicker system for SIS100 is a bipolar kicker system that allows for an in-situ choice between two directions: extraction to the experiments or to the beam dump. For that, both magnet ends are connected to a PFN each which are being charged simultaneously up to 80kV continuously. Due to the static HV operation, different to usually in other pulsed kicker systems, not only displacement current is flowing in the ferrite material. After less than 1s, the ferrite material is nearly field-free and the E-field is concentrated in the surrounding ceramic magnet clamp mechanism. As the field is further concentrated in gaps between ceramic and metallic parts, the HV layout of the magnet is a critical design task. As a magnetic field homogeneity of ±1% is required, special shaping of the coil is required as found during iterative 3D field simulations. The kicker chamber is designed to operate at a pressure level of 3·10^-11 mBar. As one 3 meter-chamber contains 3.5 m² ferrite surface, careful vacuum heat treatment of the ferrite is required to reach this pressure level. The paper will describe design principles for HV and UHV and effects found by 3D modeling.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB178
About •	paper received ※ 18 May 2021 paper accepted ※ 28 July 2021 issue date ※ 26 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The SIS100 Extraction and Emergency Kicker Magnet System

4115

J.H. Hottenbacher, K. Dunkel, M. Eisengruber, M. Osemann, A. Padvi, C. Piel
RI Research Instruments GmbH, Bergisch Gladbach, Germany
S. Heberer, I.J. Petzenhauser
GSI, Darmstadt, Germany

The extraction and emergency kicker system for SIS100 is a bipolar kicker system that allows for an in-situ choice between two directions: extraction to the experiments or to the beam dump. For that, both magnet ends are connected to a PFN each which are being charged simultaneously up to 80kV continuously. Due to the static HV operation, different to usually in other pulsed kicker systems, not only displacement current is flowing in the ferrite material. After less than 1s, the ferrite material is nearly field-free and the E-field is concentrated in the surrounding ceramic magnet clamp mechanism. As the field is further concentrated in gaps between ceramic and metallic parts, the HV layout of the magnet is a critical design task. As a magnetic field homogeneity of ±1% is required, special shaping of the coil is required as found during iterative 3D field simulations. The kicker chamber is designed to operate at a pressure level of 3·10^-11 mBar. As one 3 meter-chamber contains 3.5 m² ferrite surface, careful vacuum heat treatment of the ferrite is required to reach this pressure level. The paper will describe design principles for HV and UHV and effects found by 3D modeling.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB178

About •

paper received ※ 18 May 2021 paper accepted ※ 28 July 2021 issue date ※ 26 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)