Author: Carmignani, N.
Paper Title Page
MOXA01 Commissioning and Restart of ESRF-EBS 1
 
  • S.M. White, N. Carmignani, L.R. Carver, J. Chavanne, L. Farvacque, L. Hardy, J. Jacob, G. Le Bec, S.M. Liuzzo, T.P. Perron, Q. Qin, P. Raimondi, J.-L. Revol, K.B. Scheidt
    ESRF, Grenoble, France
 
  The ESRF operates a 6 GeV 4th generation light source, the ESRF-EBS. This storage ring is the first to implement the Hybrid Multi-Bend Achromat lattice (HMBA). The HMBA lattice provides a reduction of the horizontal emittance of approximately a factor 30 with respect to the former Double Bend Achromat (DBA) structure, considerably improving the brilliance and transverse coherence of the ESRF accelerator complex while maintaining large horizontal acceptance and excellent lifetime performance. In this report, the characteristics of the HMBA lattice will be reviewed and the beam commissioning results and first operation experience of the new ESRF storage ring will be presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOXA01  
About • paper received ※ 11 May 2021       paper accepted ※ 31 August 2021       issue date ※ 01 September 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB021 A Dispersive Quadrupole Scan Technique for Transverse Beam Characterization 107
 
  • J. Kallestrup, M. Aiba
    PSI, Villigen PSI, Switzerland
  • N. Carmignani, T.P. Perron
    ESRF, Grenoble, France
 
  Quadrupole scans are one of the standard techniques to characterize the transverse beam properties in transfer lines or linacs. However, in the presence of dispersion the usage of regular quadrupole scans will lead to erroneous estimates of the beam parameters. The standard solution to this problem is to measure the dispersion and then subtract it in the post-analysis of the quadrupole scan measurements assuming the design energy spread. Here we show that the dispersive contribution to the beam size can be included in the quadrupole scan procedure, forming a linear system of equations that can be solved to obtain both the betatronic and dispersive beam parameters. The method is tested at both the SLS and ESRF booster-to-ring transfer lines leading to reasonable estimates of the beam parameters.  
poster icon Poster MOPAB021 [0.447 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB021  
About • paper received ※ 19 May 2021       paper accepted ※ 02 June 2021       issue date ※ 19 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB051 Operation of the ESRF Booster with the New EBS Storage Ring 221
 
  • N. Carmignani, L.R. Carver, S.M. Liuzzo, T.P. Perron, S.M. White
    ESRF, Grenoble, France
 
  The Extremely Brilliant Source (EBS) has replaced the old ESRF Storage Ring (SR) during the 2019 one-year shutdown. The injector chain, composed of a Linac, a booster synchrotron, and two transfer lines, was not replaced. Nevertheless, some major hardware upgrades were anticipated prior to the long shutdown to ensure its long-term reliability. The shutdown interventions focused on reducing the machine circumference to cope with the new RF frequency of the SR. The status of the upgraded booster will be presented with a focus on the strategy used to lower horizontal emittance especially via emittance exchange.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB051  
About • paper received ※ 14 May 2021       paper accepted ※ 28 May 2021       issue date ※ 25 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB116 A Flexible Injection Scheme for the ESRF-EBS 421
 
  • S.M. White, N. Carmignani, L.R. Carver, M. Dubrulle, L. Hoummi, S.M. Liuzzo, M. Morati, T.P. Perron
    ESRF, Grenoble, France
 
  The ESRF-EBS storage ring light source started commissioning in 2019 and successfully resumed users operation in 2020. Due to the smaller emittance and consequently reduced lifetime frequent injections are required that can potentially disturb beam lines experiments. In addition, operating the machine with low beta straight section and reduced insertion devices (ID) gaps are considered, therefore reducing the vertical aperture of the machine. Alternatives to the standard off-axis injection scheme allowing for efficient injection in reduced apertures with minimized perturbations are explored. A flexible layout for potential integration in the ESRF-EBS lattice is proposed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB116  
About • paper received ※ 11 May 2021       paper accepted ※ 27 May 2021       issue date ※ 24 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB117 Single Bunch Collective Effects in the EBS Storage Ring 425
 
  • L.R. Carver, E. Buratin, N. Carmignani, F. Ewald, L. Hoummi, S.M. Liuzzo, T.P. Perron, B. Roche, S.M. White
    ESRF, Grenoble, France
 
  The ESRF storage ring (SR) has been dismantled and replaced by the Extremely Brilliant Source (EBS) which has now been commissioned. Beam based measurements have been performed to characterise the impedance of the new machine and to make a first comparison with predictions. The results from instability threshold scans and tune shift measurements will be presented, as well as bunch length and position variation with current and microwave threshold measurements.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB117  
About • paper received ※ 11 May 2021       paper accepted ※ 31 May 2021       issue date ※ 25 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB224 Optimization and Error Studies for the USSR HMBA Lattice 730
 
  • L. Hoummi, N. Carmignani, L.R. Carver, S.M. Liuzzo, T.P. Perron, S.M. White
    ESRF, Grenoble, France
  • I.A. Ashanin, S.M. Polozov
    MEPhI, Moscow, Russia
  • T. Kulevoy
    ITEP, Moscow, Russia
  • T. Kulevoy
    NRC, Moscow, Russia
 
  Several new accelerator facilities will be built in Russia in the next few years. One of those facilities is a 6 GeV storage ring (SR) light source, the Ultimate Source of Synchrotron Radiation (USSR) to be built in Protvino, near Moscow. The Cremlin+ project aims to incorporate in this activity the best experience of European Accelerator Laboratories. The optimization of such optics including realistic errors and a commissioning-like sequence of corrections, using Multi-Objective Genetic Algorithms (NSGA-II) is presented. Several corrections schemes are also tested.  
poster icon Poster MOPAB224 [1.164 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB224  
About • paper received ※ 12 May 2021       paper accepted ※ 01 June 2021       issue date ※ 13 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAB048 HMBA Optics Correction Experience at ESRF 1462
 
  • S.M. Liuzzo, N. Carmignani, L.R. Carver, L. Farvacque, T.P. Perron, P. Raimondi, S.M. White
    ESRF, Grenoble, France
 
  The ESRF-EBS storage ring, successfully commissioned in 2020, operates the HMBA lattice, first proposed in * and then adopted in several recent upgrade programs. The successful and timely commissioning of the storage is in large part due to the excellent optics control achieved over that period. Design performance were obtained with lower than predicted correction strengths, localized for the most part in the vicinity of sextupoles. This remarkable behavior is not only the result of the corrective actions taken during the commissioning but also of the extremely accurate conception and alignment of the machine. This report summarizes the steps that lead to the present performances and discusses their stability over time.
* J.Biasci et al. Synchrotron Radiation News27, 8 (2014), https://doi.org/10.1080/08940886.2014.970931.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB048  
About • paper received ※ 10 May 2021       paper accepted ※ 11 June 2021       issue date ※ 20 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAB049 USSR HMBA Storage Ring Lattice Options 1466
 
  • S.M. Liuzzo, N. Carmignani, L.R. Carver, J. Chavanne, L. Hoummi, J. Jacob, T.P. Perron, R. Versteegen, S.M. White
    ESRF, Grenoble, France
  • I.A. Ashanin, V.S. Dyubkov, S.M. Polozov
    MEPhI, Moscow, Russia
  • I.A. Ashanin, V.S. Dyubkov, T. Kulevoy, S.M. Polozov
    NRC, Moscow, Russia
  • T. Kulevoy
    ITEP, Moscow, Russia
 
  Funding: European Union’s Horizon 2020 research and innovation program under grant #871072 Russian federation resolution #287
Several new accelerator facilities will be built in Russia in a few years from now. One of those facilities is a 6GeV storage ring (SR) light source (USSR - Ultimate Source of Synchrotron Radiation) to be built in Protvino, near Moscow. The Cremlin+ project aims to incorporate in this activity the best experience of European Accelerator Laboratories. The design of the optics for this SR is presented here in two declinations leading to 70 pm-rad equilibrium horizontal emittance. The first is a 40 cells lattice, the second is the same but includes high field Short Bending magnet sources in each cell. Optics and high order multipole optimizations are performed to obtain sufficient lifetime and dynamic aperture for a conservative off-axis injection.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB049  
About • paper received ※ 12 May 2021       paper accepted ※ 11 June 2021       issue date ※ 21 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAB050 A Long Booster Option for the USSR 6 GeV Storage Ring 1470
 
  • S.M. Liuzzo, N. Carmignani, L.R. Carver, L. Hoummi, T.P. Perron, R. Versteegen, S.M. White
    ESRF, Grenoble, France
  • I.A. Ashanin, S.M. Polozov
    MEPhI, Moscow, Russia
  • I.A. Ashanin, T. Kulevoy, S.M. Polozov
    NRC, Moscow, Russia
  • T. Kulevoy
    ITEP, Moscow, Russia
 
  Funding: European Union’s Horizon 2020 research and innovation program under grant #871072 Russian federation resolution no. 287
The design of the optics of a full length 6 GeV booster for the USSR (Ultimate Source of Synchrotron Radiation) are presented. This option already followed with success by other laboratories, would allow to obtain a small emittance injected beam thus enabling smooth top-up operation. Details of the design inspired by the ESRF DBA lattice and the possible operating modes are described. The transfer lines booster to storage ring are also addressed in this paper.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB050  
About • paper received ※ 12 May 2021       paper accepted ※ 11 June 2021       issue date ※ 24 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAB074 ESRF-EBS: Implementation, Performance and Restart of User Operation 3929
 
  • J.-L. Revol, P. Berkvens, J.-F. Bouteille, N. Carmignani, L.R. Carver, J.M. Chaize, J. Chavanne, F. Ewald, A. Franchi, L. Hardy, J. Jacob, L. Jolly, G. Le Bec, I. Leconte, S.M. Liuzzo, D. Martin, J. Pasquaud, T.P. Perron, Q. Qin, P. Raimondi, B. Roche, K.B. Scheidt, R. Versteegen, S.M. White
    ESRF, Grenoble, France
 
  The European Synchrotron Radiation Facility - Extremely Brilliant Source (ESRF-EBS) is a facility upgrade allowing its scientific users to take advantage of the first high-energy 4th generation light source. In December 2018, after 30 years of operation, the beam stopped for a 12-month shutdown to dismantle the old storage ring and to install the new X-ray source. In December 2019, the first beam was stored and accumulated in the storage ring, allowing the vacuum conditioning and tuning to be started. The beam was delivered to beamlines in March 2020 for their commissioning. On 25 August, the user programme was restarted with beam parameters very close to nominal values. In this report, the milestones and key aspects of the return to user-mode operation are presented and discussed.  
poster icon Poster THPAB074 [2.864 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB074  
About • paper received ※ 19 May 2021       paper accepted ※ 26 July 2021       issue date ※ 01 September 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)