IPAC2021 - List of Authors (Boogert, S.T.)

Paper	Title	Page
WEPAB186	Studies for the K12 High-Intensity Kaon Beam at CERN	3049
	G.L. D’Alessandro, D. Banerjee, J. Bernhard, M. Brugger, N. Doble, L. Gatignon, A. Gerbershagen, R. Marchevski, B. Rae, S. Schuchmann, F.W. Stummer, M.W.U. Van Dijk CERN, Geneva, Switzerland S.T. Boogert, S.M. Gibson, L.J. Nevay JAI, Egham, Surrey, United Kingdom
	The NA62 experiment is a fixed target experiment located in the North Area of CERN and has as main goal the measurement of the branching ratio of the rare decay K±>pi+vv. The primary proton beam from the SPS accelerator interacts with the T10 beryllium target and the generated 75 GeV/c secondary particles, containing about 6% of positive kaons, are transported by the K12 beamline to the NA62 experiment. Studies in this paper present detailed simulations of the K12 beamline developed in both FLUKA and BDSIM codes, which reproduce the current configuration of K12 for the NA62 experiment. The beam optics parameters of K12 are studied in BDSIM and compared to MADX optics and tracking calculations. The models in FLUKA and BDSIM are used for beam studies and muon production at various locations along the beamline, and the parameters obtained from simulations are benchmarked against data recorded by the experiment. The impact of the Cherenkov kaon tagging detector (CEDAR) on the beam quality is calculated for two different gas compositions in view of a possible upgrade of the detector.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB186
About •	paper received ※ 17 May 2021 paper accepted ※ 01 July 2021 issue date ※ 27 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB214	Recent BDSIM Related Developments and Modeling of Accelerators	4208
	L.J. Nevay, A. Abramov, S.E. Alden, S.T. Boogert, G. D’Alessandro, S.M. Gibson, H. Lefebvre, W. Shields, S.D. Walker JAI, Egham, Surrey, United Kingdom A. Abramov, G. D’Alessandro, C. Hernalsteens CERN, Meyrin, Switzerland E. Gnacadja, C. Hernalsteens, E. Ramoisiaux, R. Tesse ULB, Bruxelles, Belgium S. Liu DESY, Hamburg, Germany
	Funding: This work is supported by the STFC (UK) grants: JAI ST/P00203X/1, HL-LHC-UK1 ST/N001583/1, HL-LHC-UK2 ST/T001925/1, and ST/P003028/1. Beam Delivery Simulation (BDSIM) is a program based on Geant4 that creates 3D radiation transport models of accelerators from a simple optical description in a vastly reduced time frame with great flexibility. It also uses ROOT and CLHEP to create a single simulation model that can accurately track all particle species in an accelerator to predict and understand beam losses, secondary radiation, dosimetric quantities and their origin. BDSIM provides a library of scalable generic geometry for a variety of applications. Our Python package, Pyg4ometry, allows rapid preparation and conversion of geometries for BDSIM and other radiation transport simulations including FLUKA. We present a broad overview of BDSIM developments related to a variety of experiments at several facilities. We present a model of the forward experiment FASER at the LHC, CERN where the geometry is composited from multiple sources using Pyg4ometry. The analysis of particle history is presented as well as production mechanisms. We also present the application of recently introduced laser interactions in Geant4 to Compton photons from a laserwire diagnostic at the ATF2.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB214
About •	paper received ※ 20 May 2021 paper accepted ※ 19 July 2021 issue date ※ 22 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB416	BDSIM Developments for Hadron Therapy Centre Applications	1252
	E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, M. Vanwelde ULB, Bruxelles, Belgium S.T. Boogert, L.J. Nevay Royal Holloway, University of London, Surrey, United Kingdom C. Hernalsteens CERN, Geneva, Switzerland W. Shields JAI, Egham, Surrey, United Kingdom
	Hadron therapy centres are evolving towards reduced-footprint layouts, often featuring a single treatment room. The evaluation of beam properties, radiation protection quantities, and concrete shielding activation via numerical simulations poses new challenges that can be tackled using the numerical beam transport and Monte-Carlo code Beam Delivery Simulation (BDSIM), allowing a seamless simulation of the dynamics as a whole. Specific developments have been carried out in BDSIM to advance its efficiency toward such applications, and a detailed 4D Monte-Carlo scoring mechanism has been implemented. It produces tallies such as the spatial-energy differential fluence in arbitrary scoring meshes. The feature makes use of the generic boost::histogram library and allows an event-by-event serialisation and storage in the ROOT data format. The pyg4ometry library is extended to improve the visualisation of critical features such as the complex geometries of BDSIM models, the beam tracks, and the scored quantities. Data are converted from Geant4 and ROOT to a 3D visualisation using the VTK framework. These features are applied to a complete IBA Proteus One model.
	Poster MOPAB416 [1.575 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB416
About •	paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 15 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Studies for the K12 High-Intensity Kaon Beam at CERN

3049

G.L. D’Alessandro, D. Banerjee, J. Bernhard, M. Brugger, N. Doble, L. Gatignon, A. Gerbershagen, R. Marchevski, B. Rae, S. Schuchmann, F.W. Stummer, M.W.U. Van Dijk
CERN, Geneva, Switzerland
S.T. Boogert, S.M. Gibson, L.J. Nevay
JAI, Egham, Surrey, United Kingdom

The NA62 experiment is a fixed target experiment located in the North Area of CERN and has as main goal the measurement of the branching ratio of the rare decay K±>pi+vv. The primary proton beam from the SPS accelerator interacts with the T10 beryllium target and the generated 75 GeV/c secondary particles, containing about 6% of positive kaons, are transported by the K12 beamline to the NA62 experiment. Studies in this paper present detailed simulations of the K12 beamline developed in both FLUKA and BDSIM codes, which reproduce the current configuration of K12 for the NA62 experiment. The beam optics parameters of K12 are studied in BDSIM and compared to MADX optics and tracking calculations. The models in FLUKA and BDSIM are used for beam studies and muon production at various locations along the beamline, and the parameters obtained from simulations are benchmarked against data recorded by the experiment. The impact of the Cherenkov kaon tagging detector (CEDAR) on the beam quality is calculated for two different gas compositions in view of a possible upgrade of the detector.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB186

About •

paper received ※ 17 May 2021 paper accepted ※ 01 July 2021 issue date ※ 27 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB214

Recent BDSIM Related Developments and Modeling of Accelerators

4208

L.J. Nevay, A. Abramov, S.E. Alden, S.T. Boogert, G. D’Alessandro, S.M. Gibson, H. Lefebvre, W. Shields, S.D. Walker
JAI, Egham, Surrey, United Kingdom
A. Abramov, G. D’Alessandro, C. Hernalsteens
CERN, Meyrin, Switzerland
E. Gnacadja, C. Hernalsteens, E. Ramoisiaux, R. Tesse
ULB, Bruxelles, Belgium
S. Liu
DESY, Hamburg, Germany

Funding: This work is supported by the STFC (UK) grants: JAI ST/P00203X/1, HL-LHC-UK1 ST/N001583/1, HL-LHC-UK2 ST/T001925/1, and ST/P003028/1.
Beam Delivery Simulation (BDSIM) is a program based on Geant4 that creates 3D radiation transport models of accelerators from a simple optical description in a vastly reduced time frame with great flexibility. It also uses ROOT and CLHEP to create a single simulation model that can accurately track all particle species in an accelerator to predict and understand beam losses, secondary radiation, dosimetric quantities and their origin. BDSIM provides a library of scalable generic geometry for a variety of applications. Our Python package, Pyg4ometry, allows rapid preparation and conversion of geometries for BDSIM and other radiation transport simulations including FLUKA. We present a broad overview of BDSIM developments related to a variety of experiments at several facilities. We present a model of the forward experiment FASER at the LHC, CERN where the geometry is composited from multiple sources using Pyg4ometry. The analysis of particle history is presented as well as production mechanisms. We also present the application of recently introduced laser interactions in Geant4 to Compton photons from a laserwire diagnostic at the ATF2.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB214

About •

paper received ※ 20 May 2021 paper accepted ※ 19 July 2021 issue date ※ 22 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB416

BDSIM Developments for Hadron Therapy Centre Applications

1252

E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, M. Vanwelde
ULB, Bruxelles, Belgium
S.T. Boogert, L.J. Nevay
Royal Holloway, University of London, Surrey, United Kingdom
C. Hernalsteens
CERN, Geneva, Switzerland
W. Shields
JAI, Egham, Surrey, United Kingdom

Hadron therapy centres are evolving towards reduced-footprint layouts, often featuring a single treatment room. The evaluation of beam properties, radiation protection quantities, and concrete shielding activation via numerical simulations poses new challenges that can be tackled using the numerical beam transport and Monte-Carlo code Beam Delivery Simulation (BDSIM), allowing a seamless simulation of the dynamics as a whole. Specific developments have been carried out in BDSIM to advance its efficiency toward such applications, and a detailed 4D Monte-Carlo scoring mechanism has been implemented. It produces tallies such as the spatial-energy differential fluence in arbitrary scoring meshes. The feature makes use of the generic boost::histogram library and allows an event-by-event serialisation and storage in the ROOT data format. The pyg4ometry library is extended to improve the visualisation of critical features such as the complex geometries of BDSIM models, the beam tracks, and the scored quantities. Data are converted from Geant4 and ROOT to a 3D visualisation using the VTK framework. These features are applied to a complete IBA Proteus One model.

Poster MOPAB416 [1.575 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB416

About •

paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 15 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)