IPAC2021 - List of Authors (Ashanin, I.A.)

Paper	Title	Page
MOPAB042	Beam Dynamics Investigation for a New Project of Compton Back Scattering Photon Source at NRNU MEPhI	186
	V.S. Dyubkov, I.A. Ashanin, M. Gusarova, Yu.D. Kliuchevskaia, M.V. Lalayan, S.M. Polozov, A.I. Pronikov, V.I. Rashchikov MEPhI, Moscow, Russia
	Funding: This project is supported by Russian Foundation for Basic Research, Grant no. 19-29-12036. The activities on physical models design of a compact monochromatic radiation source in the x-ray range based on inverse Compton scattering are started at NRNU MEPhI. There are comparison of two schemes of the photon source here: one of them is considered to be based on linac with variable energy of 20-60 MeV only and the other one is considered as accelerator complex where linac is supposed to be used as injector to medium size storage ring (energy up to 60 MeV). Preliminary results of linac structures and storage ring design as well as electron dynamics simulation are discussed
	Poster MOPAB042 [0.962 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB042
About •	paper received ※ 13 May 2021 paper accepted ※ 20 May 2021 issue date ※ 10 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB224	Optimization and Error Studies for the USSR HMBA Lattice	730
	L. Hoummi, N. Carmignani, L.R. Carver, S.M. Liuzzo, T.P. Perron, S.M. White ESRF, Grenoble, France I.A. Ashanin, S.M. Polozov MEPhI, Moscow, Russia T. Kulevoy ITEP, Moscow, Russia T. Kulevoy NRC, Moscow, Russia
	Several new accelerator facilities will be built in Russia in the next few years. One of those facilities is a 6 GeV storage ring (SR) light source, the Ultimate Source of Synchrotron Radiation (USSR) to be built in Protvino, near Moscow. The Cremlin+ project aims to incorporate in this activity the best experience of European Accelerator Laboratories. The optimization of such optics including realistic errors and a commissioning-like sequence of corrections, using Multi-Objective Genetic Algorithms (NSGA-II) is presented. Several corrections schemes are also tested.
	Poster MOPAB224 [1.164 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB224
About •	paper received ※ 12 May 2021 paper accepted ※ 01 June 2021 issue date ※ 13 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB049	USSR HMBA Storage Ring Lattice Options	1466
	S.M. Liuzzo, N. Carmignani, L.R. Carver, J. Chavanne, L. Hoummi, J. Jacob, T.P. Perron, R. Versteegen, S.M. White ESRF, Grenoble, France I.A. Ashanin, V.S. Dyubkov, S.M. Polozov MEPhI, Moscow, Russia I.A. Ashanin, V.S. Dyubkov, T. Kulevoy, S.M. Polozov NRC, Moscow, Russia T. Kulevoy ITEP, Moscow, Russia
	Funding: European Union’s Horizon 2020 research and innovation program under grant #871072 Russian federation resolution #287 Several new accelerator facilities will be built in Russia in a few years from now. One of those facilities is a 6GeV storage ring (SR) light source (USSR - Ultimate Source of Synchrotron Radiation) to be built in Protvino, near Moscow. The Cremlin+ project aims to incorporate in this activity the best experience of European Accelerator Laboratories. The design of the optics for this SR is presented here in two declinations leading to 70 pm-rad equilibrium horizontal emittance. The first is a 40 cells lattice, the second is the same but includes high field Short Bending magnet sources in each cell. Optics and high order multipole optimizations are performed to obtain sufficient lifetime and dynamic aperture for a conservative off-axis injection.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB049
About •	paper received ※ 12 May 2021 paper accepted ※ 11 June 2021 issue date ※ 21 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB050	A Long Booster Option for the USSR 6 GeV Storage Ring	1470
	S.M. Liuzzo, N. Carmignani, L.R. Carver, L. Hoummi, T.P. Perron, R. Versteegen, S.M. White ESRF, Grenoble, France I.A. Ashanin, S.M. Polozov MEPhI, Moscow, Russia I.A. Ashanin, T. Kulevoy, S.M. Polozov NRC, Moscow, Russia T. Kulevoy ITEP, Moscow, Russia
	Funding: European Union’s Horizon 2020 research and innovation program under grant #871072 Russian federation resolution no. 287 The design of the optics of a full length 6 GeV booster for the USSR (Ultimate Source of Synchrotron Radiation) are presented. This option already followed with success by other laboratories, would allow to obtain a small emittance injected beam thus enabling smooth top-up operation. Details of the design inspired by the ESRF DBA lattice and the possible operating modes are described. The transfer lines booster to storage ring are also addressed in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB050
About •	paper received ※ 12 May 2021 paper accepted ※ 11 June 2021 issue date ※ 24 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Dynamics Investigation for a New Project of Compton Back Scattering Photon Source at NRNU MEPhI

186

V.S. Dyubkov, I.A. Ashanin, M. Gusarova, Yu.D. Kliuchevskaia, M.V. Lalayan, S.M. Polozov, A.I. Pronikov, V.I. Rashchikov
MEPhI, Moscow, Russia

Funding: This project is supported by Russian Foundation for Basic Research, Grant no. 19-29-12036.
The activities on physical models design of a compact monochromatic radiation source in the x-ray range based on inverse Compton scattering are started at NRNU MEPhI. There are comparison of two schemes of the photon source here: one of them is considered to be based on linac with variable energy of 20-60 MeV only and the other one is considered as accelerator complex where linac is supposed to be used as injector to medium size storage ring (energy up to 60 MeV). Preliminary results of linac structures and storage ring design as well as electron dynamics simulation are discussed

Poster MOPAB042 [0.962 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB042

About •

paper received ※ 13 May 2021 paper accepted ※ 20 May 2021 issue date ※ 10 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB224

Optimization and Error Studies for the USSR HMBA Lattice

730

L. Hoummi, N. Carmignani, L.R. Carver, S.M. Liuzzo, T.P. Perron, S.M. White
ESRF, Grenoble, France
I.A. Ashanin, S.M. Polozov
MEPhI, Moscow, Russia
T. Kulevoy
ITEP, Moscow, Russia
T. Kulevoy
NRC, Moscow, Russia

Several new accelerator facilities will be built in Russia in the next few years. One of those facilities is a 6 GeV storage ring (SR) light source, the Ultimate Source of Synchrotron Radiation (USSR) to be built in Protvino, near Moscow. The Cremlin+ project aims to incorporate in this activity the best experience of European Accelerator Laboratories. The optimization of such optics including realistic errors and a commissioning-like sequence of corrections, using Multi-Objective Genetic Algorithms (NSGA-II) is presented. Several corrections schemes are also tested.

Poster MOPAB224 [1.164 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB224

About •

paper received ※ 12 May 2021 paper accepted ※ 01 June 2021 issue date ※ 13 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB049

USSR HMBA Storage Ring Lattice Options

1466

S.M. Liuzzo, N. Carmignani, L.R. Carver, J. Chavanne, L. Hoummi, J. Jacob, T.P. Perron, R. Versteegen, S.M. White
ESRF, Grenoble, France
I.A. Ashanin, V.S. Dyubkov, S.M. Polozov
MEPhI, Moscow, Russia
I.A. Ashanin, V.S. Dyubkov, T. Kulevoy, S.M. Polozov
NRC, Moscow, Russia
T. Kulevoy
ITEP, Moscow, Russia

Funding: European Union’s Horizon 2020 research and innovation program under grant #871072 Russian federation resolution #287
Several new accelerator facilities will be built in Russia in a few years from now. One of those facilities is a 6GeV storage ring (SR) light source (USSR - Ultimate Source of Synchrotron Radiation) to be built in Protvino, near Moscow. The Cremlin+ project aims to incorporate in this activity the best experience of European Accelerator Laboratories. The design of the optics for this SR is presented here in two declinations leading to 70 pm-rad equilibrium horizontal emittance. The first is a 40 cells lattice, the second is the same but includes high field Short Bending magnet sources in each cell. Optics and high order multipole optimizations are performed to obtain sufficient lifetime and dynamic aperture for a conservative off-axis injection.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB049

About •

paper received ※ 12 May 2021 paper accepted ※ 11 June 2021 issue date ※ 21 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB050

A Long Booster Option for the USSR 6 GeV Storage Ring

1470

S.M. Liuzzo, N. Carmignani, L.R. Carver, L. Hoummi, T.P. Perron, R. Versteegen, S.M. White
ESRF, Grenoble, France
I.A. Ashanin, S.M. Polozov
MEPhI, Moscow, Russia
I.A. Ashanin, T. Kulevoy, S.M. Polozov
NRC, Moscow, Russia
T. Kulevoy
ITEP, Moscow, Russia

Funding: European Union’s Horizon 2020 research and innovation program under grant #871072 Russian federation resolution no. 287
The design of the optics of a full length 6 GeV booster for the USSR (Ultimate Source of Synchrotron Radiation) are presented. This option already followed with success by other laboratories, would allow to obtain a small emittance injected beam thus enabling smooth top-up operation. Details of the design inspired by the ESRF DBA lattice and the possible operating modes are described. The transfer lines booster to storage ring are also addressed in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB050

About •

paper received ※ 12 May 2021 paper accepted ※ 11 June 2021 issue date ※ 24 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)