IPAC2021 - List of Authors (Akhyani, M.)

Paper	Title	Page
TUPAB244	THE WAKEFIELD STUDY OF THE RF-SHIELDED BELLOWS AT THE ILSF STORAGE RING	2015
	N. Khosravi, E. Ahmadi, M. Akhyani ILSF, Tehran, Iran M. Akhyani EPFL, Lausanne, Switzerland A. Khosravi LAPRI, Tehran, Iran
	The corrugated geometry of the bellows made it critical to be shielded with an RF-Shield. Different types of RF shields can be applied to the ILSF vacuum chamber to cover this component’s destructive impedance peaks. Then, the Impedance study and optimization of the RF shields can improve the impedance budget. In this article, two common types of RF shields are simulated in CST software.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB244
About •	paper received ※ 16 May 2021 paper accepted ※ 02 June 2021 issue date ※ 14 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB245	WAKEFIELD AND HEAT LOAD STUDY OF THE GATE VALVES AT ILSF STORAGE RING	2018
	N. Khosravi, E. Ahmadi, M. Akhyani ILSF, Tehran, Iran M. Akhyani EPFL, Lausanne, Switzerland S. Dastan IPM, Tehran, Iran A. Khosravi LAPRI, Tehran, Iran
	As one part of the ILSF storage ring, the rf-shield of the gate valves generates considerable interest in terms of wake impedance and heat-load. Inside the gate valves, there is a vacuity, which causes low frequencies resonances, and it can lead to beam instabilities. Therefore, controlling and eliminating these frequencies will be substantial. A radio frequency rf-shield structure, which conceals this transverse gap of the gate valves, is indispensable for low emittance chambers. This paper analyzes the wake impedance and thermal behavior of a finger-band RF shield in the gate valve.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB245
About •	paper received ※ 16 May 2021 paper accepted ※ 14 June 2021 issue date ※ 13 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

THE WAKEFIELD STUDY OF THE RF-SHIELDED BELLOWS AT THE ILSF STORAGE RING

2015

N. Khosravi, E. Ahmadi, M. Akhyani
ILSF, Tehran, Iran
M. Akhyani
EPFL, Lausanne, Switzerland
A. Khosravi
LAPRI, Tehran, Iran

The corrugated geometry of the bellows made it critical to be shielded with an RF-Shield. Different types of RF shields can be applied to the ILSF vacuum chamber to cover this component’s destructive impedance peaks. Then, the Impedance study and optimization of the RF shields can improve the impedance budget. In this article, two common types of RF shields are simulated in CST software.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB244

About •

paper received ※ 16 May 2021 paper accepted ※ 02 June 2021 issue date ※ 14 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB245

WAKEFIELD AND HEAT LOAD STUDY OF THE GATE VALVES AT ILSF STORAGE RING

2018

N. Khosravi, E. Ahmadi, M. Akhyani
ILSF, Tehran, Iran
M. Akhyani
EPFL, Lausanne, Switzerland
S. Dastan
IPM, Tehran, Iran
A. Khosravi
LAPRI, Tehran, Iran

As one part of the ILSF storage ring, the rf-shield of the gate valves generates considerable interest in terms of wake impedance and heat-load. Inside the gate valves, there is a vacuity, which causes low frequencies resonances, and it can lead to beam instabilities. Therefore, controlling and eliminating these frequencies will be substantial. A radio frequency rf-shield structure, which conceals this transverse gap of the gate valves, is indispensable for low emittance chambers. This paper analyzes the wake impedance and thermal behavior of a finger-band RF shield in the gate valve.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB245

About •

paper received ※ 16 May 2021 paper accepted ※ 14 June 2021 issue date ※ 13 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)