The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Peters, C.C. AU - Shishlo, A.P. ED - Liu, Lin ED - Byrd, John M. ED - Neuenschwander, Regis T. ED - Picoreti, Renan ED - Schaa, Volker R. W. TI - Pattern Based Parameter Setup of the SNS Linac J2 - Proc. of IPAC2021, Campinas, SP, Brazil, 24-28 May 2021 CY - Campinas, SP, Brazil T2 - International Particle Accelerator Conference T3 - 12 LA - english AB - Theoretical and practical aspects of beam tuning procedures used for the SNS linac are discussed. The SNS linac includes two sections of beam acceleration. Acceleration in the first section up to 185.5 MeV is done with a room temperature copper linac which consists of both Drift Tube Linac (DTL) and Coupled Cavity Linac (CCL) Radio Frequency (RF) cavities. The second section consists of 81 Superconducting RF (SRF) cavities which accelerate the beam to the final beam energy of 1 GeV. The linac is currently capable of delivering an average beam power output of 1.44 MW with typical yearly operating hours of around 4500 hours. Due to the high power output and high availability of the linac, activation of accelerator equipment is a significant concern. The linac tuning process consists of three stages: model based setup of amplitudes and phases of the RF cavities, empirical beam loss reduction, and then documentation of the final amplitudes and phases of RF cavities after the empirical tuning. The final step is needed to ensure fast recovery from an SRF cavity failure. This paper discusses models, algorithms, diagnostic tools, software, and practices that are used for these stages. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2276 EP - 2278 KW - cavity KW - linac KW - DTL KW - operation KW - beam-losses DA - 2021/08 PY - 2021 SN - 2673-5490 SN - 978-3-95450-214-1 DO - doi:10.18429/JACoW-IPAC2021-TUPAB329 UR - https://jacow.org/ipac2021/papers/tupab329.pdf ER -