IPAC2019 - List of Authors (Zou, Y.)

Paper	Title	Page
MOPRB046	Status of the ESSnuSB Accumulator Design	666
	Y. Zou, T.J.C. Ekelöf, M. Olvegård, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden E. Bouquerel, M. Dracos IPHC, Strasbourg Cedex 2, France M. Eshraqi, B. Gålnander ESS, Lund, Sweden H.O. Schönauer, E.H.M. Wildner CERN, Meyrin, Switzerland
	Funding: This project is supported by the COST Action CA15139 EuroNuNet. It has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 777419. The 2.0 GeV, 5 MW proton linac for the European Spallation Source, ESS, will have the capacity to accelerate additional pulses and send them to a neutrino target, providing an excellent opportunity to produce an unprecedented high performance neutrino beam, the ESS neutrino Super Beam, ESSnuSB, to measure, with precision, the CP violating phase at the 2nd oscillation maximum. In order to comply with the acceptance of the target and horn systems that will form the neutrino super beam, the long pulses from the linac must be compressed by about three orders of magnitude with minimal particle loss, something that will be achieved through multi-turn charge-exchange injection in an accumulator ring. This ring will accommodate over 2·10¹⁴ protons, which means that several design challenges are encountered. Strong space charge forces, low-loss injection with phase space painting, efficient collimation, a reliable charge stripping system, and e-p instabilities are some of the important aspects central to the design work. This paper presents the status of the accumulator ring design, with multi-particle simulations of the injections procedure.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB046
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the ESSnuSB Accumulator Design

666

Y. Zou, T.J.C. Ekelöf, M. Olvegård, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
E. Bouquerel, M. Dracos
IPHC, Strasbourg Cedex 2, France
M. Eshraqi, B. Gålnander
ESS, Lund, Sweden
H.O. Schönauer, E.H.M. Wildner
CERN, Meyrin, Switzerland

Funding: This project is supported by the COST Action CA15139 EuroNuNet. It has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 777419.
The 2.0 GeV, 5 MW proton linac for the European Spallation Source, ESS, will have the capacity to accelerate additional pulses and send them to a neutrino target, providing an excellent opportunity to produce an unprecedented high performance neutrino beam, the ESS neutrino Super Beam, ESSnuSB, to measure, with precision, the CP violating phase at the 2nd oscillation maximum. In order to comply with the acceptance of the target and horn systems that will form the neutrino super beam, the long pulses from the linac must be compressed by about three orders of magnitude with minimal particle loss, something that will be achieved through multi-turn charge-exchange injection in an accumulator ring. This ring will accommodate over 2·10¹⁴ protons, which means that several design challenges are encountered. Strong space charge forces, low-loss injection with phase space painting, efficient collimation, a reliable charge stripping system, and e-p instabilities are some of the important aspects central to the design work. This paper presents the status of the accumulator ring design, with multi-particle simulations of the injections procedure.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB046

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)