IPAC2019 - List of Authors (Wang, H.)

Paper	Title	Page
THPTS034	Design and Progress of Mechanical Support in HEPS	4180
	C.H. Li, Y. Jiao, M.X. Li, H. Wang, Z. Wang, L. Wu, N. Zhou IHEP, Beijing, People’s Republic of China
	HEPS is a new generation synchrotron facility on construction with very low emittance. Stringent requirements are proposed to the design of mechanical support. The alignment error between girders should be less than 50μm. Based on that, the adjusting resolution of the girder are required to be less than 5μm in both transverse and vertical directions. Besides, the Eigen frequency of magnet & girder assembly should be higher than 54Hz to avoid the amplification of ground vibrations. To fulfill these requirements, studies on mechanical support design is now being carried out in HEPS. This paper will describe the design and progress of those work.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS034
About •	paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS040	Preliminary Design of Mechanical Supports for the Booster of Heps	4197
	H. Wang, C.H. Li, C. Meng, H. Qu IHEP, Beijing, People’s Republic of China
	The Booster of High Energy Photon Source (HEPS) is a 454 meters ring with the repeat frequency of 1 Hz. The natural frequency of the magnets and their support as-sembly should be higher than 30 Hz. The alignment re-quirements on quadrupole and sextupole are better than 0.1 mm in x and y direction. This paper will discuss the preliminary design of the mechanical supports in Booster ring, as well as the discussion of finite element analyses results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS040
About •	paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS041	Progress and TDR Plans of the Mechanical System of CEPC	4200
	H. Wang, S. Bai, M.X. Li, Y.D. Liu, C. Meng, H. Qu, J.L. Wang, P. Zhang, N. Zhou IHEP, Beijing, People’s Republic of China
	The TDR of CEPC is aimed at the key science and technology problems and makes preparations for the real project. This paper will describe the progress of mechanical system including the regular supports and transport vehicle design, the mockup plan, the installation scenario of machine detector interface (MDI) and the movable collimator, as well as the TDR plans of mechanical system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS041
About •	paper received ※ 28 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Progress of Mechanical Support in HEPS

4180

C.H. Li, Y. Jiao, M.X. Li, H. Wang, Z. Wang, L. Wu, N. Zhou
IHEP, Beijing, People’s Republic of China

HEPS is a new generation synchrotron facility on construction with very low emittance. Stringent requirements are proposed to the design of mechanical support. The alignment error between girders should be less than 50μm. Based on that, the adjusting resolution of the girder are required to be less than 5μm in both transverse and vertical directions. Besides, the Eigen frequency of magnet & girder assembly should be higher than 54Hz to avoid the amplification of ground vibrations. To fulfill these requirements, studies on mechanical support design is now being carried out in HEPS. This paper will describe the design and progress of those work.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS034

About •

paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS040

Preliminary Design of Mechanical Supports for the Booster of Heps

4197

H. Wang, C.H. Li, C. Meng, H. Qu
IHEP, Beijing, People’s Republic of China

The Booster of High Energy Photon Source (HEPS) is a 454 meters ring with the repeat frequency of 1 Hz. The natural frequency of the magnets and their support as-sembly should be higher than 30 Hz. The alignment re-quirements on quadrupole and sextupole are better than 0.1 mm in x and y direction. This paper will discuss the preliminary design of the mechanical supports in Booster ring, as well as the discussion of finite element analyses results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS040

About •

paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS041

Progress and TDR Plans of the Mechanical System of CEPC

4200

H. Wang, S. Bai, M.X. Li, Y.D. Liu, C. Meng, H. Qu, J.L. Wang, P. Zhang, N. Zhou
IHEP, Beijing, People’s Republic of China

The TDR of CEPC is aimed at the key science and technology problems and makes preparations for the real project. This paper will describe the progress of mechanical system including the regular supports and transport vehicle design, the mockup plan, the installation scenario of machine detector interface (MDI) and the movable collimator, as well as the TDR plans of mechanical system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS041

About •

paper received ※ 28 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)