IPAC2019 - List of Authors (Vikharev, A.A.)

Paper	Title	Page
MOPRB067	High-gradient Single Cycle Terahertz Accelerating Structures	731
	S.P. Antipov, E. Gomez, S.V. Kuzikov Euclid TechLabs, LLC, Solon, Ohio, USA A.A. Vikharev IAP/RAS, Nizhny Novgorod, Russia
	Recently, gradients on the order of 1 GV/m level have been obtained in a form of single cycle (~1 ps) THz pulses produced by conversion of a high peak power laser radiation in nonlinear crystals (~1 mJ, 1 ps, up to 3% conversion efficiency). These pulses however are broadband (0.1-5 THz) and therefore a new accelerating structure type is required. For electron beam acceleration with such pulses we propose arrays of parabolic focusing micro-mirrors with common central. These novel structures could be produced by a femtosecond laser ablation system developed at Euclid Techlabs. This technology had already been tested for production of several millimeters long, multi-cell structure which has been testing with electron beam. We also propose using of structures where necessary GV/m E-fields are excited by a drive bunch travelling in the corrugated waveguide. The radiated by drive bunch sequence of short range delayed wakes are guided in this case by metallic disks and reflected back being focused exactly at time when the witness bunch arrives.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB067
About •	paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB073	CW Room Temperature Accelerating Structures	2990
	S.P. Antipov, P.V. Avrakhov, E. Gomez, S.V. Kuzikov Euclid TechLabs, LLC, Solon, Ohio, USA A.A. Vikharev IAP/RAS, Nizhny Novgorod, Russia
	To this day CW linear electron accelerators were based only on expensive and bulky (embedded in a cryostat) superconducting accelerating structures. CW regime can in principle be realized with normal conducting structures provided the shunt impedance is high. Such structures can be designed using dielectrics (ultra-pure ceramics in C-band and diamond in mm-waves) with ultra-low loss tangent (~10-6). The use of dielectrics allows to concentrate the electromagnetic energy density in the dielectric region and thus minimize fields and ohmic loss on metallic walls. The thermal loss in dielectric can be relatively low given the loss tangent is small. We report here the design of structures with shunt impedance on the order of 10⁴ MOhm/m, which is several orders of magnitude higher than shut impedance in copper structures in GHz and THz range. High shunt impedance makes it possible to accelerate electrons to 1 MeV using kW-level CW RF sources like magnetrons in C-band and gyrotrons in THz range. Such CW accelerators will find applications in sterilization, food irradiation, industrial radiography and cargo inspection.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB073
About •	paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

High-gradient Single Cycle Terahertz Accelerating Structures

731

S.P. Antipov, E. Gomez, S.V. Kuzikov
Euclid TechLabs, LLC, Solon, Ohio, USA
A.A. Vikharev
IAP/RAS, Nizhny Novgorod, Russia

Recently, gradients on the order of 1 GV/m level have been obtained in a form of single cycle (~1 ps) THz pulses produced by conversion of a high peak power laser radiation in nonlinear crystals (~1 mJ, 1 ps, up to 3% conversion efficiency). These pulses however are broadband (0.1-5 THz) and therefore a new accelerating structure type is required. For electron beam acceleration with such pulses we propose arrays of parabolic focusing micro-mirrors with common central. These novel structures could be produced by a femtosecond laser ablation system developed at Euclid Techlabs. This technology had already been tested for production of several millimeters long, multi-cell structure which has been testing with electron beam. We also propose using of structures where necessary GV/m E-fields are excited by a drive bunch travelling in the corrugated waveguide. The radiated by drive bunch sequence of short range delayed wakes are guided in this case by metallic disks and reflected back being focused exactly at time when the witness bunch arrives.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB067

About •

paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB073

CW Room Temperature Accelerating Structures

2990

S.P. Antipov, P.V. Avrakhov, E. Gomez, S.V. Kuzikov
Euclid TechLabs, LLC, Solon, Ohio, USA
A.A. Vikharev
IAP/RAS, Nizhny Novgorod, Russia

To this day CW linear electron accelerators were based only on expensive and bulky (embedded in a cryostat) superconducting accelerating structures. CW regime can in principle be realized with normal conducting structures provided the shunt impedance is high. Such structures can be designed using dielectrics (ultra-pure ceramics in C-band and diamond in mm-waves) with ultra-low loss tangent (~10-6). The use of dielectrics allows to concentrate the electromagnetic energy density in the dielectric region and thus minimize fields and ohmic loss on metallic walls. The thermal loss in dielectric can be relatively low given the loss tangent is small. We report here the design of structures with shunt impedance on the order of 10⁴ MOhm/m, which is several orders of magnitude higher than shut impedance in copper structures in GHz and THz range. High shunt impedance makes it possible to accelerate electrons to 1 MeV using kW-level CW RF sources like magnetrons in C-band and gyrotrons in THz range. Such CW accelerators will find applications in sterilization, food irradiation, industrial radiography and cargo inspection.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB073

About •

paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)