Author: van Riesen-Haupt, L.
Paper Title Page
MOPMP023 Dynamic Aperture at Injection Energy for the HE-LHC 480
SUSPFO101   use link to see paper's listing under its alternate paper code  
 
  • M. Hofer, M. Giovannozzi, J. Keintzel, R. Tomás, F. Zimmermann
    CERN, Geneva, Switzerland
  • L. van Riesen-Haupt
    JAI, Oxford, United Kingdom
 
  As part of the Future Circular Collider study, the High Energy LHC (HE-LHC) is a proposed hadron collider situated in the already existing LHC tunnel. It aims at achieving a center of mass energy of 27 TeV, almost doubling the design c.o.m. energy of the LHC. This increase in energy relies on the use of 16 T Nb3Sn dipoles to be developed for the FCC-hh. The field quality of these dipoles is expected to have a big impact on the Dynamic Aperture (DA) at injection energy and subsequently tracking studies are conducted to evaluate the impact of magnetic field errors on the beam dynamics. In the following the results of these studies for the different injection energies considered for the HE-LHC are presented and a possible strategy for increasing the DA are discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP023  
About • paper received ※ 06 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMP026 HE-LHC Optics Design Options 492
SUSPFO103   use link to see paper's listing under its alternate paper code  
 
  • J. Keintzel, M.P. Crouch, M. Hofer, T. Risselada, R. Tomás, F. Zimmermann
    CERN, Geneva, Switzerland
  • M. Hofer, J. Keintzel
    TU Vienna, Wien, Austria
  • L. van Riesen-Haupt
    University of Oxford, Oxford, United Kingdom
  • L. van Riesen-Haupt
    JAI, Oxford, United Kingdom
 
  The High Energy Large Hadron Collider (HE-LHC), a possible successor of the High Luminosity Large Hadron Collider (HL-LHC) aims at reaching a centre-of-mass energy of about 27 TeV using basically the same 16 T dipoles as for the hadron-hadron Future Circular Collider FCC-hh. Designing the HE-LHC results in a trade off between energy reach, beam stay clear as well as geometry offset with respect to the LHC. In order to best meet the requirements, various arc cell and dispersion suppressor options have been generated and analysed, before concluding on two baseline options, which are presented in this paper. Merits of each design are highlighted and possible solutions for beam stay clear minima are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP026  
About • paper received ※ 02 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMP037 Updated High-Energy LHC Design 524
 
  • F. Zimmermann, D. Amorim, S.A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, J. Keintzel, R. Kersevan, V. Mertens, J. Molson, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
    CERN, Geneva, Switzerland
  • J.L. Abelleira, A. Abramov, E. Cruz Alaniz, H. Pikhartova, A. Seryi, L. van Riesen-Haupt
    JAI, Oxford, United Kingdom
  • A. Apyan
    ANSL, Yerevan, Armenia
  • J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
    EPFL, Lausanne, Switzerland
  • F. Burkart
    DESY, Hamburg, Germany
  • Y. Cai, Y.M. Nosochkov
    SLAC, Menlo Park, California, USA
  • G. Guillermo Cantón
    CINVESTAV, Mérida, Mexico
  • K. Ohmi, K. Oide, D. Zhou
    KEK, Ibaraki, Japan
 
  Funding: This work was supported in part by the European Commission under the HORIZON 2020 project ARIES no.730871, and by the Swiss Accelerator Research and Technology collaboration CHART.
We present updated design parameters for a future High-Energy LHC. A more realistic turnaround time has led to a revision of the target peak luminosity, as well as a choice of a larger IP beta function, and longer physics fills. Pushed parameters of the Nb3Sn superconducting cable together with a modified layout of the 16 T dipole magnets resulted in revised field errors, updated dynamic-aperture simulations, and an associated re-evaluation of injector options. Collimators in the dispersion suppressors help achieve satisfactory cleaning performance. Longitudinal beam parameters ensure beam stability throughout the cycle. Intrabeam scattering rates and Touschek lifetime appear benign.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP037  
About • paper received ※ 10 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMP039 Developments in the Experimental Interaction Regions of the High Energy LHC 532
 
  • L. van Riesen-Haupt, J.L. Abelleira
    University of Oxford, Oxford, United Kingdom
  • J.L. Abelleira, E. Cruz Alaniz
    JAI, Oxford, United Kingdom
  • J. Barranco García, T. Pieloni, C. Tambasco
    EPFL, Lausanne, Switzerland
  • M. Hofer, J. Keintzel, R. Tomás, F. Zimmermann
    CERN, Meyrin, Switzerland
 
  Funding: Work supported by the Swiss institute for Accelerator Research and Technology , CHART.
The High Energy LHC (HE-LHC) aims to collide 13.5 TeV protons in two high luminosity experiments and two low luminosity experiments. In the following, the recent updates in the two high luminosity experimental interaction regions (EIR) of the HE-LHC will be illustrated. These EIR aim to focus the beams to a β* of 0.45 m at the interaction point (IP) to achieve a lifetime integrated luminosity of 10 ab-1. On top of the triplet optics designed to achieve this, it will present energy deposition driven separation dipole designs, optics solutions for the matching section and dispersion suppressors as well as studies involving the integration into the lattice options. In particular it will outline geometric considerations, spurious dispersion suppression as well as results from dynamic aperture studies.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP039  
About • paper received ※ 14 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)