| Paper | Title | Page |
|---|---|---|
| TUPGW098 | Fabrication & Cold Tests of a Millimeter-Period RF Undulator | 1643 |
|
||
|
Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515, and the National Science Foundation under Contract No. PHY-1415437. To reduce the linac energy required for an FEL radiating at a given wavelength, and hence its size, a smaller undulator period with sufficient field strength is needed. Previous work from our group successfully demonstrated a microwave undulator at 11.424GHz, using a corrugated cylindrical waveguide operating at the HE11 modes. We have designed a mm-wave undulator cavity at 91.392GHz* with an equivalent undulator period of 1.75 mm. This undulator requires 1.4 MW for sub microsecond pulses for an equivalent K value of 0.1. In this work we present the mechanical design and fabrication of this 91.392 GHz RF Undulator, as well as preliminary cold test data. * F. Toufexis and S.G. Tantawi, "A 1.75-mm Period RF-Driven Undulator", Proceedings of IPAC17. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW098 | |
| About • | paper received ※ 10 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPGW099 | Superconducting Crab Cavity Options for Short X-Ray Pulse Generation in SPEAR3 | 1647 |
|
||
|
Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515. We are exploring methods to generate short X-ray pulses in SPEAR3 on the order of 1 ps to enable studying ultrafast processes in materials. We are developing a 2-frequency crab cavity scheme with two sets of crab cavities* at the 6th and 6.5th harmonics of the 476 MHz ring RF frequency. In previous work we studied a normal conducting crab cavity for SPEAR3**. In this work we explored two superconducting cavity options: a traditional elliptical cavity and the Quasi-waveguide Resonator***. We found that the Quasi-waveguide Resonator cannot meet our field uniformity specifications due to higher order multipole fields. We then optimized a traditional elliptical cavity with the input, Lower Order Modes, and Higher Order Modes couplers following the Argonne Advanced Photon Source design. * A. Zholents, et al, Nucl. Instrum. Methods Phys. Res., Sect. A, Vol. 425 (1999), p. 385. ** Z. Li, et al, Proceedings of IPAC17. *** A. Lunin, et al, Proceedings of HOMSC14. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW099 | |
| About • | paper received ※ 11 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPTS063 | Development of a W-Band Power Extraction Structure | 4252 |
|
||
|
Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515, and the National Science Foundation under Contract No. PHY-1415437. We are modifying the X-Band Test Accelerator at SLAC to operate as an Extreme Ultra Violet (EUV) light source*. The existing photo electron gun will be replaced by a thermionic X-Band injector which utilizes RF bunch compression. The beam is accelerated up to 129 MeV using an X-Band traveling wave structure followed by a novel high shunt impedance standing wave structure. The beam then goes through a mm-wave undulator with a period of 1.75 mm, producing EUV radiation around 13.5 nm. The undulator is powered by a W-Band decelerator structure, which extracts the RF power from the electron beam. In this work we present the mechanical design and fabrication of the 91.392 GHz decelerator structure, as well as structural characterization of its cavities using SEM and 3D microscopy. * F. Toufexis, et al, "A Compact EUV Light Source using a mm-wave Undulator", Proceedings of IPAC17. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS063 | |
| About • | paper received ※ 10 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPTS064 | Sub-Picosecond X-Ray Streak Camera using High-Gradient RF Cavities | 4256 |
|
||
|
Funding: This project was funded by U.S. Department of Energy under Contract No. DE-AC02-76SF00515. We are developing an ultrafast diagnostic system for X-ray beams from Synchrotron Light Sources and Free-Electron Lasers. In this system, the X-ray beam is focused on the photocathode of a high-gradient radio-frequency cavity that accelerates the photo-emitted electrons to a few MeV while preserving their time structure. The accelerated electron beam is streaked by radio-frequency deflectors and then imaged on a screen. This approach will allow orders of magnitude improvement in time resolution over traditional streak cameras and could potentially enable time-resolved diagnostics of sub-100 fs X-ray pulses. We present preliminary beam dynamics simulations of this system and discuss the implementation. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS064 | |
| About • | paper received ※ 11 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |