Paper | Title | Page |
---|---|---|
MOPRB061 | Simulations and Measurements of Coherent Synchrotron Radiation at the MAX-IV Short Pulse Facility | 712 |
|
||
The Coherent Synchrotron Radiation (CSR) interaction is a source of unwanted correlated energy spread in short-bunch Free-Electron Lasers (FEL), diluting the desired FEL spectrum and reducing the total brightness of the light source. Many accelerator codes make use of 1-dimensional approximations in the calculation of the CSR-wake, which breaks down for bunch dimensions typical within bunch compressor dipoles in FELs. General Particle Tracer simulations of the CSR interaction make use of the 3-dimensional bunch distribution, making it advantageous in modelling the short-bunch, high aspect ratio regimes typical of modern 4th-generation light sources. Measurements of THz CSR emitted from the final bunch compressor dipole of the SP02 beamline at the MAX-IV Short Pulse Facility (SPF) were used, alongside start-to-end GPT and Elegant simulations, to characterize coherent radiation emission across a broad range of bunch lengths. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB061 | |
About • | paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUYPLM3 | Status of the MAX IV Accelerators | 1185 |
|
||
The MAX IV facility in Lund, Sweden, consists of three electron accelerators and their respective synchrotron radiation beamlines: a 3 GeV ring, which is the first implementation worldwide of a multi-bend achromat lattice, a 1.5 GeV ring optimized for soft X-Rays and UV radiation production and a 3 GeV linear accelerator that acts as a full-energy injector into both rings and provides electron pulses as short as 100 fs that produce X-rays by spontaneous emission in the undulators of the short-pulse facility (SPF). In this paper, we review the latest achieved accelerator performance and operational results. | ||
![]() |
Slides TUYPLM3 [9.108 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUYPLM3 | |
About • | paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPTS061 | The Pre-Injector and Photocathode Gun Design for the MAX IV SXL | 2064 |
|
||
The design of the pre-injector, including the new gun, for the SXL project is being finalised for the desired modes of operation, 100 pC and 10 pC with short bunches. The photocathode gun is currently being manufactured and experiments in the MAX IV guntest facility are under preparation to verify the design. In this paper we present the design of the gun and the pre-injector and show some results from simulations using MOGA indicating an emittance below 0.3 mm mrad. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS061 | |
About • | paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEYYPLS2 | First Experimental Measurements of the Caustic Nature of Trajectories in Bunch Compressors | 2270 |
|
||
Theoretical advancements describing density perturbations in accelerated charge particle beams, known as caustics, has been recently developed * This proceeding describes the first experimental measurements of the caustic nature of charged particle trajectories in a particle accelerator. Caustics by their nature are discontinuities that result from small continuous perturbations of an input. Under certain conditions, small density modulations will reliably produce striking changes in the corresponding output current profile. These current modulations can shift alone the bunch with varying higher-order longitudinal dispersion. The MAX IV linac double-bend achromats provide the perfect test bed for experimentally verifying how the caustic lines evolve. The natural amplification of small perturbations makes caustics an attractive diagnostic tool, and effective tool for characterise the bunch compressors. This approach also allows us to modify and improve the longitudinal charge profile, removing current spikes or creating tailor shaped current profiles.
* T.K.Charles et. al. Phys. Rev. Accel. Beams 19, 104402 |
||
![]() |
Slides WEYYPLS2 [5.402 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLS2 | |
About • | paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPGW095 | Coherent Transition Radiation Spatial Imaging as a Bunch Length Monitor | 2713 |
|
||
Funding: This work was supported by the EU under Grant Agreement No. 624890 and the STFC Cockcroft Institute core Grant No. ST/G008248/1. High-resolution bunch length measurement is a key component in the optimisation of beam quality in FELs, storage rings, and plasma-based accelerators. Simulations have shown that the profile of a coherent transition radiation (CTR) image produced by a charged particle beam is sensitive to bunch length and can thus be used as a diagnostic. This contribution presents the development progress of a novel bunch length monitor based on imaging the spatial distribution of CTR. Due to the bunch lengths studied, 10fs-100fs FWHM, the radiation of interest was in the THz range. This led to the development of a THz imaging system, which can be applied to both high and low energy electron beams. The associated benefits of this imaging distribution methodology over the typical angular distribution measurement are discussed. Building upon preliminary multi-shot proof of concept results last year, a new series of experiments have been conducted in the short pulse facility (SPF) at MAX IV. Single-shot measurements have been used to measure the exact point of maximum compression. Analysis from the proof of concept results last year, and initial results from the new measurements this year are discussed. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW095 | |
About • | paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |