IPAC2019 - List of Authors (Tanabe, T.)

Paper	Title	Page
WEPGW101	A New Orbit Feedforward Table Generation Method for Insertion Devices	2724
	Y. Hidaka, B.N. Kosciuk, B. Podobedov, J. Rank, T. Tanabe BNL, Upton, Long Island, New York, USA
	Funding: The study is supported by U.S. DOE under Contract No. DE-SC0012704. A new method of orbit feedforward (FF) table generation for insertion devices (IDs) is proposed. The main purpose of the orbit FF table is to suppress orbit disturbance around a storage ring, caused by the gap/phase motion of an ID. A conventional procedure is to measure a closed orbit at a reference ID gap/phase state, and another one at a different state, with all types of orbit feedback (FB) systems disabled. Based on the difference orbit, the correction currents for the local ID correctors are estimated to cancel the global orbit distortion. The new method instead utilizes the orbit deviation at the beam position monitors within an ID straight section (ID BPMs) with respect to a dynamically changing orbit that is defined by the orbit at two BPMs bounding the ID straight. Correction currents are determined such that this orbit deviation at the ID BPMs is minimized. Being impervious to transverse kicks external to this bounded region, this measurement can be performed with a global orbit FB system turned on, which could allow parallel table generation for multiple IDs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW101
About •	paper received ※ 17 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW102	Investigation on Mysterious Long-Term Orbit Drift at NSLS-II	2728
	Y. Hidaka, W.X. Cheng, L. Doom, R.P. Fliller, G. Ganetis, J. Gosman, C. Hetzel, R.A. Hubbard, D. Padrazo Jr, B. Podobedov, J. Rose, T.V. Shaftan, S.K. Sharma, V.V. Smaluk, T. Tanabe, Y. Tian, G.M. Wang, C.H. Yu BNL, Upton, Long Island, New York, USA
	Funding: The study is supported by U.S. DOE under Contract No. DE-SC0012704. Over a few months in 2018, we observed occasional episodes of relatively quick accumulation of correction strengths for the fast correctors (used by the fast orbit feedback) near Cell 4 (C04) region at NSLS-II Storage Ring. We immediately started investigating the problem, but the cause remained unclear. However, after coming back from the Fall shutdown, we experienced even faster drifts, at a rate of as much as 10 urad per day in terms of orbit kick angle accumulation. The risk of damage on the ring vacuum chambers by the continuing orbit drift without explanation eventually forced us to take emergency study shifts and temporarily lock out the C04 IVU beamline. After extensive investigation by many subsystem experts in Accelerator Division, ruling out many suspicious sources one by one, we were finally able to conclude the cause to be the localized ground motion induced by large temperature jumps of the utility tunnel right underneath the C04 straight section. We report the details of this incident.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW102
About •	paper received ※ 19 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS094	High Gradient Quadrupoles for Low Emittance Synchrtrons	4332
	S.K. Sharma, T.V. Shaftan, V.V. Smaluk, C.J. Spataro, T. Tanabe, G.M. Wang BNL, Upton, Long Island, New York, USA N.A. Mezentsev BINP SB RAS, Novosibirsk, Russia
	A new lattice design has been proposed recently based on a Complex-Bend concept [1,2] for low emittance syn-chrotrons. The dipoles of a standard DBA lattice are replaced in the Complex Bend by high-gradient (~ 450 T/m) quadrupoles interleaved between discrete dipoles. In another version of the Complex Bend [3] the high gradient quadrupoles are displaced transversely along the beam trajectory to generate the required dipole field. In the latter version the quadrupole strength is reduced to ~ 250 T/m for a lattice that will conform to the layout of the existing NSLS-II 3-GeV storage ring. In this paper we present conceptual designs of a Halbach permanent-magnet (PM) quadrupole, a hybrid PM quadrupole, and a superconducting quadrupole, that can produce the de-sired quadrupole strengths for the Complex Bend appli-cation. REFERENCES [1] T. Shaftan, V. Smaluk and G. Wang, ’The Concept of Com-plex Bend’, NSLS-II Tech note No. 276, Jan 2018. [2] G. Wang et al., ’Complex Bend: Strong-focusing magnet for low emittance synchrotrons’, Physical Review Accelerators and Beams, 21, 100703 (2018). [3] G. Wang et al., ’Complex Bend II’, paper submitted to Physi-cal Review Accelerators and Beams.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS094
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A New Orbit Feedforward Table Generation Method for Insertion Devices

2724

Y. Hidaka, B.N. Kosciuk, B. Podobedov, J. Rank, T. Tanabe
BNL, Upton, Long Island, New York, USA

Funding: The study is supported by U.S. DOE under Contract No. DE-SC0012704.
A new method of orbit feedforward (FF) table generation for insertion devices (IDs) is proposed. The main purpose of the orbit FF table is to suppress orbit disturbance around a storage ring, caused by the gap/phase motion of an ID. A conventional procedure is to measure a closed orbit at a reference ID gap/phase state, and another one at a different state, with all types of orbit feedback (FB) systems disabled. Based on the difference orbit, the correction currents for the local ID correctors are estimated to cancel the global orbit distortion. The new method instead utilizes the orbit deviation at the beam position monitors within an ID straight section (ID BPMs) with respect to a dynamically changing orbit that is defined by the orbit at two BPMs bounding the ID straight. Correction currents are determined such that this orbit deviation at the ID BPMs is minimized. Being impervious to transverse kicks external to this bounded region, this measurement can be performed with a global orbit FB system turned on, which could allow parallel table generation for multiple IDs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW101

About •

paper received ※ 17 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW102

Investigation on Mysterious Long-Term Orbit Drift at NSLS-II

2728

Y. Hidaka, W.X. Cheng, L. Doom, R.P. Fliller, G. Ganetis, J. Gosman, C. Hetzel, R.A. Hubbard, D. Padrazo Jr, B. Podobedov, J. Rose, T.V. Shaftan, S.K. Sharma, V.V. Smaluk, T. Tanabe, Y. Tian, G.M. Wang, C.H. Yu
BNL, Upton, Long Island, New York, USA

Funding: The study is supported by U.S. DOE under Contract No. DE-SC0012704.
Over a few months in 2018, we observed occasional episodes of relatively quick accumulation of correction strengths for the fast correctors (used by the fast orbit feedback) near Cell 4 (C04) region at NSLS-II Storage Ring. We immediately started investigating the problem, but the cause remained unclear. However, after coming back from the Fall shutdown, we experienced even faster drifts, at a rate of as much as 10 urad per day in terms of orbit kick angle accumulation. The risk of damage on the ring vacuum chambers by the continuing orbit drift without explanation eventually forced us to take emergency study shifts and temporarily lock out the C04 IVU beamline. After extensive investigation by many subsystem experts in Accelerator Division, ruling out many suspicious sources one by one, we were finally able to conclude the cause to be the localized ground motion induced by large temperature jumps of the utility tunnel right underneath the C04 straight section. We report the details of this incident.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW102

About •

paper received ※ 19 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS094

High Gradient Quadrupoles for Low Emittance Synchrtrons

4332

S.K. Sharma, T.V. Shaftan, V.V. Smaluk, C.J. Spataro, T. Tanabe, G.M. Wang
BNL, Upton, Long Island, New York, USA
N.A. Mezentsev
BINP SB RAS, Novosibirsk, Russia

A new lattice design has been proposed recently based on a Complex-Bend concept [1,2] for low emittance syn-chrotrons. The dipoles of a standard DBA lattice are replaced in the Complex Bend by high-gradient (~ 450 T/m) quadrupoles interleaved between discrete dipoles. In another version of the Complex Bend [3] the high gradient quadrupoles are displaced transversely along the beam trajectory to generate the required dipole field. In the latter version the quadrupole strength is reduced to ~ 250 T/m for a lattice that will conform to the layout of the existing NSLS-II 3-GeV storage ring. In this paper we present conceptual designs of a Halbach permanent-magnet (PM) quadrupole, a hybrid PM quadrupole, and a superconducting quadrupole, that can produce the de-sired quadrupole strengths for the Complex Bend appli-cation. REFERENCES [1] T. Shaftan, V. Smaluk and G. Wang, ’The Concept of Com-plex Bend’, NSLS-II Tech note No. 276, Jan 2018. [2] G. Wang et al., ’Complex Bend: Strong-focusing magnet for low emittance synchrotrons’, Physical Review Accelerators and Beams, 21, 100703 (2018). [3] G. Wang et al., ’Complex Bend II’, paper submitted to Physi-cal Review Accelerators and Beams.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS094

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)