IPAC2019 - List of Authors (Tamura, F.)

Paper	Title	Page
MOPGW037	Dynamic Variation of Chromaticity for Beam Instability Mitigation in the 3-GeV RCS of J-PARC	171
	P.K. Saha, H. Harada, H. Hotchi, Y. Shobuda, T. Takayanagi, F. Tamura, Y. Watanabe JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
	We have studied many other dynamic approaches from that reported in the IPAC 2018 for transverse beam instability mitigation in the presence of strong space charge in the 3-GeV RCS of J-PARC. One of such a method is the introduction of an excess of chromaticity from that of natural chromaticity by reversing the sextupole magnetic fields from the middle of the acceleration cycle. The benifits of this method are twofold. It allows to utilize sextupole for chromaticty correction at lower energy and also mitigate the beam instability at higher energy because of introducing higher chromaticity. We first carried out numerical simulations by using ORBIT code, experimentally verified and then applied for the machine operation. The detail of simulation and measurements results are presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW037
About •	paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS035	Vacuum Tube Operation Analysis for 1.2 MW Beam Acceleration in J-PARC RCS	2017
	M. Yamamoto, M. Nomura, T. Shimada, F. Tamura JAEA/J-PARC, Tokai-mura, Japan M. Furusawa, K. Hara, K. Hasegawa, C. Ohmori, Y. Sugiyama, M. Yoshii KEK, Tokai, Ibaraki, Japan
	The J-PARC RCS has successfully accelerated 1 MW proton beam, matching the designed beam power. Therefore, we have considered acceleration beyond the designed beam power, with the next target being 1.2 MW. An issue for 1.2 MW beam acceleration is the rf system. The present anode power supply is limited by its output current, and the vacuum tube amplifier suffers from an unbalance of the anode voltage swing, arising from the combination of multi-harmonic rf driving and push-pull operation. We have investigated the mitigation of the maximum anode currents and unbalanced tubes by choosing appropriate circuit parameters of the rf cavity with the tube amplifier. We describe the analysis results of the vacuum tube operation for 1.2 MW beam acceleration in the RCS.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS035
About •	paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP010	8 Gev Slow Extraction Beam Test for Muon to Electron Conversion Search Experiment at J-PARC	2322
	M. Tomizawa, Y. Arakaki, Y. Fukao, Y. Hashimoto, Y. Igarashi, T. Kimura, S. Mihara, M. Moritsu, S. Murasugi, R. Muto, H. Nishiguchi, K. Okamura, Y. Shirakabe, K. Ueno, E. Yanaoka KEK, Ibaraki, Japan Y. Fujii Monash University, Faculty of Science, Clayton, Victoria, Australia F. Tamura JAEA/J-PARC, Tokai-mura, Japan
	A muon to electron conversion search experiment (COMET) planned at J-PARC needs 8 GeV bunched proton beams with a continuous 1 MHz pulse structure. In this experiment, an intensity ratio of the residual to the main pulsed beam, which is expressed as extinction, should be less than the level of 10^-10. In RUN78 (Jan. to Feb., 2018), we have succeeded in slow extraction of 8 GeV protons with 7.3×1012 ppp, satisfies the COMET phase-I requirement, and the extinction derived from a timing measurement of secondary particles from the target shows a promising result. A mechanism to explain the measured extinction will be also described in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP010
About •	paper received ※ 01 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB026	Simulations of Beam Loading Compensation in a Wideband Accelerating Cavity Using a Circuit Simulator Including a LLRF Feedback Control	2863
	F. Tamura, M. Nomura, T. Shimada, M. Yamamoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan M. Furusawa, K. Hara, K. Hasegawa, C. Ohmori, Y. Sugiyama, M. Yoshii KEK, Tokai, Ibaraki, Japan
	Magnetic alloy cavities are employed in the J-PARC RCS to generate high accelerating voltages. The cavity, which is driven by a vacuum tube amplifier, has a wideband frequency response and the beam loading in the cavity is multiharmonic. Therefore, the tube must generate a multiharmonic output current. An LTspice circuit model is developed to analyze the vacuum tube operation and the compensation of the multiharmonic beam loading. The model includes the cavity, tube amplifier, beam current, and LLRF feedback control. The feedback control consists of the I/Q demodulator including low pass filters, PI control, and I/Q modulator. In this presentation, we present the implementation of the LLRF functions in the LTspice simulations. The preliminary simulation results are also presented. The simulations fairly agree with the beam test results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB026
About •	paper received ※ 23 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLS2	Extinction Measurement of J-PARC MR with 8 GeV Proton Beam for the New Muon-to-Electron Conversion Search Experiment - COMET	4372
	H. Nishiguchi, Y. Fukao, Y. Hashimoto, Y. Igarashi, S. Mihara, M. Moritsu, R. Muto, M. Tomizawa, K. Ueno KEK, Tsukuba, Japan Y. Fujii Monash University, Faculty of Science, Clayton, Victoria, Australia P. Sarin Indian Institute of Technology Bombay, Mumbai, India F. Tamura JAEA/J-PARC, Tokai-mura, Japan
	Funding: This work is partially supported by JSPS (Japan Society for the Promotion of Science) : KAKENHI 15K13492 and 16H00876 At J-PARC, extraction tests of a 8GeV pulsed proton beam from Main Ring (MR) have been successfully completed by a team drawn from the Accelerator Laboratory Group and the COherent Muon to Electron Transition (COMET) Experimental Group. The COMET Experiment aims to find new physics beyond the Standard Model by searching for the coherent neutrinoless conversion of a muon to an electron in muonic atoms, so-called mu-e conversion. This requires an extremely clean pulsed beam, and development of this beam plays a key role in the pursuit of the highest level of sensitivity. This successful extraction test is the clearing of a major milestone for the forthcoming experiment. The goal of the extraction tests was to confirm the beam quality under the customized MR operation mode. The J-PARC MR usually accelerates the proton beam (at one bunch per 600ns) up to 30GeV. But in the test, the MR instead accelerates the proton beam (at one bunch per 1.2us) up to 8GeV. The number of protons leaking between proton bunches, so-called EXTINCTION, must be less than one for every 10¹⁰ protons in the bunch. Extraction tests in the customized mode were conducted in January and February 2018 and resulted in many successes. In this test, leakage protons between bunches was successfully reduced below the objective of 10⁻¹⁰ of the number of protons in a bunch. This is a great success to guarantee the quality of proton beam required by COMET experiment. In addition, the time development of proton leakage was also precisely studied with several RF settings which enables us to further improve the extinction. In this paper, the result of extinction measurement and future prospect of beam extinction improvement is presented in addition to the detailed description of customized MR operation.
	Slides FRXXPLS2 [13.427 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLS2
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Dynamic Variation of Chromaticity for Beam Instability Mitigation in the 3-GeV RCS of J-PARC

171

P.K. Saha, H. Harada, H. Hotchi, Y. Shobuda, T. Takayanagi, F. Tamura, Y. Watanabe
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan

We have studied many other dynamic approaches from that reported in the IPAC 2018 for transverse beam instability mitigation in the presence of strong space charge in the 3-GeV RCS of J-PARC. One of such a method is the introduction of an excess of chromaticity from that of natural chromaticity by reversing the sextupole magnetic fields from the middle of the acceleration cycle. The benifits of this method are twofold. It allows to utilize sextupole for chromaticty correction at lower energy and also mitigate the beam instability at higher energy because of introducing higher chromaticity. We first carried out numerical simulations by using ORBIT code, experimentally verified and then applied for the machine operation. The detail of simulation and measurements results are presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW037

About •

paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS035

Vacuum Tube Operation Analysis for 1.2 MW Beam Acceleration in J-PARC RCS

2017

M. Yamamoto, M. Nomura, T. Shimada, F. Tamura
JAEA/J-PARC, Tokai-mura, Japan
M. Furusawa, K. Hara, K. Hasegawa, C. Ohmori, Y. Sugiyama, M. Yoshii
KEK, Tokai, Ibaraki, Japan

The J-PARC RCS has successfully accelerated 1 MW proton beam, matching the designed beam power. Therefore, we have considered acceleration beyond the designed beam power, with the next target being 1.2 MW. An issue for 1.2 MW beam acceleration is the rf system. The present anode power supply is limited by its output current, and the vacuum tube amplifier suffers from an unbalance of the anode voltage swing, arising from the combination of multi-harmonic rf driving and push-pull operation. We have investigated the mitigation of the maximum anode currents and unbalanced tubes by choosing appropriate circuit parameters of the rf cavity with the tube amplifier. We describe the analysis results of the vacuum tube operation for 1.2 MW beam acceleration in the RCS.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS035

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP010

8 Gev Slow Extraction Beam Test for Muon to Electron Conversion Search Experiment at J-PARC

2322

M. Tomizawa, Y. Arakaki, Y. Fukao, Y. Hashimoto, Y. Igarashi, T. Kimura, S. Mihara, M. Moritsu, S. Murasugi, R. Muto, H. Nishiguchi, K. Okamura, Y. Shirakabe, K. Ueno, E. Yanaoka
KEK, Ibaraki, Japan
Y. Fujii
Monash University, Faculty of Science, Clayton, Victoria, Australia
F. Tamura
JAEA/J-PARC, Tokai-mura, Japan

A muon to electron conversion search experiment (COMET) planned at J-PARC needs 8 GeV bunched proton beams with a continuous 1 MHz pulse structure. In this experiment, an intensity ratio of the residual to the main pulsed beam, which is expressed as extinction, should be less than the level of 10^-10. In RUN78 (Jan. to Feb., 2018), we have succeeded in slow extraction of 8 GeV protons with 7.3×1012 ppp, satisfies the COMET phase-I requirement, and the extinction derived from a timing measurement of secondary particles from the target shows a promising result. A mechanism to explain the measured extinction will be also described in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP010

About •

paper received ※ 01 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB026

Simulations of Beam Loading Compensation in a Wideband Accelerating Cavity Using a Circuit Simulator Including a LLRF Feedback Control

2863

F. Tamura, M. Nomura, T. Shimada, M. Yamamoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
M. Furusawa, K. Hara, K. Hasegawa, C. Ohmori, Y. Sugiyama, M. Yoshii
KEK, Tokai, Ibaraki, Japan

Magnetic alloy cavities are employed in the J-PARC RCS to generate high accelerating voltages. The cavity, which is driven by a vacuum tube amplifier, has a wideband frequency response and the beam loading in the cavity is multiharmonic. Therefore, the tube must generate a multiharmonic output current. An LTspice circuit model is developed to analyze the vacuum tube operation and the compensation of the multiharmonic beam loading. The model includes the cavity, tube amplifier, beam current, and LLRF feedback control. The feedback control consists of the I/Q demodulator including low pass filters, PI control, and I/Q modulator. In this presentation, we present the implementation of the LLRF functions in the LTspice simulations. The preliminary simulation results are also presented. The simulations fairly agree with the beam test results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB026

About •

paper received ※ 23 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLS2

Extinction Measurement of J-PARC MR with 8 GeV Proton Beam for the New Muon-to-Electron Conversion Search Experiment - COMET

4372

H. Nishiguchi, Y. Fukao, Y. Hashimoto, Y. Igarashi, S. Mihara, M. Moritsu, R. Muto, M. Tomizawa, K. Ueno
KEK, Tsukuba, Japan
Y. Fujii
Monash University, Faculty of Science, Clayton, Victoria, Australia
P. Sarin
Indian Institute of Technology Bombay, Mumbai, India
F. Tamura
JAEA/J-PARC, Tokai-mura, Japan

Funding: This work is partially supported by JSPS (Japan Society for the Promotion of Science) : KAKENHI 15K13492 and 16H00876
At J-PARC, extraction tests of a 8GeV pulsed proton beam from Main Ring (MR) have been successfully completed by a team drawn from the Accelerator Laboratory Group and the COherent Muon to Electron Transition (COMET) Experimental Group. The COMET Experiment aims to find new physics beyond the Standard Model by searching for the coherent neutrinoless conversion of a muon to an electron in muonic atoms, so-called mu-e conversion. This requires an extremely clean pulsed beam, and development of this beam plays a key role in the pursuit of the highest level of sensitivity. This successful extraction test is the clearing of a major milestone for the forthcoming experiment. The goal of the extraction tests was to confirm the beam quality under the customized MR operation mode. The J-PARC MR usually accelerates the proton beam (at one bunch per 600ns) up to 30GeV. But in the test, the MR instead accelerates the proton beam (at one bunch per 1.2us) up to 8GeV. The number of protons leaking between proton bunches, so-called EXTINCTION, must be less than one for every 10¹⁰ protons in the bunch. Extraction tests in the customized mode were conducted in January and February 2018 and resulted in many successes. In this test, leakage protons between bunches was successfully reduced below the objective of 10⁻¹⁰ of the number of protons in a bunch. This is a great success to guarantee the quality of proton beam required by COMET experiment. In addition, the time development of proton leakage was also precisely studied with several RF settings which enables us to further improve the extinction. In this paper, the result of extinction measurement and future prospect of beam extinction improvement is presented in addition to the detailed description of customized MR operation.

Slides FRXXPLS2 [13.427 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLS2

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)