Author: Takayama, K.
Paper Title Page
MOPTS051 Lattice Design for 5MeV-125mA CW RFQ Operation in the LIPAc 977
 
  • Y. Shimosaki, A. Kasugai, K. Kondo, K. Sakamoto, M. Sugimoto
    QST, Aomori, Japan
  • L. Bellan, M. Comunian, E. Fagotti, A. Pisent
    INFN/LNL, Legnaro (PD), Italy
  • B. Brañas Lasala, C. Oliver, I. Podadera
    CIEMAT, Madrid, Spain
  • P. Cara
    IFMIF/EVEDA, Rokkasho, Japan
  • N. Chauvin
    CEA-IRFU, Gif-sur-Yvette, France
  • G. Duglue, H. Dzitko
    F4E, Germany
  • R. Heidinger
    Fusion for Energy, Garching, Germany
  • H. Kobayashi, K. Takayama
    KEK, Ibaraki, Japan
  
  The installation and commissioning of the LIPAc are ongoing under the Broader Approach agreement, which is the prototype accelerator of the IFMIF for proof of princi-ple and design. The deuteron beam will be accelerated by the RFQ linac from 100 keV to 5 MeV during the com-missioning phase-B and by the SRF linac up to 9 MeV during the phase-C. The commissioning phase-B+ will be implemented between phase-B and C to complete the engineering validation of the RFQ linac before installing the SRF linac. The lattice for the deuteron beam of 5 MeV and 125 mA at the commissioning phase-B+ was designed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS051  
About • paper received ※ 15 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPGW029 Crucial Transverse Beam Dynamics of the Racetrack-shape Fixed Field Induction Accelerator for Giant Cluster Ions 3643
 
  • T. Taufik
    BATAN, Yogyakarta, Indonesia
  • T. Adachi, K. Takayama, M. Wake
    KEK, Ibaraki, Japan
  
  A racetrack-shape fixed field induction accelerator (RAFFIA) for high energy giant cluster ion acceleration was proposed in 2015*. The RAFFIA employs 4 bending magnets with gradient in the main pole face and reverse field strip at its front side which generate strong focusing in both planes. Beam dynamics properties of the RAFFIA of 140 MeV for C-60 have been evaluated by linear optics. The result has been confirmed with a help of 3D macro-particle computer simulation**. It is identified that the issue of COD generated from field non-uniformity associated with a finite size of the bending magnet is inherent. The programmed COD correction by steering magnets are discussed as well as the importance of uniformity in the magnet field profile. So far it has been unknown what beam current is acceptable in the RAFFIA. In order to estimate space-charge effects in the RAFFIA under design, the 2D core (σ) evolution equation has been derived from the envelope equation perturbed by space-charge fields. Resonant structures and chaotic motion in the phase space of (σ,σ’) have been clarified as a function of beam current. Those results were justified by macro-particle tracking based on a renormalized transfer matrix approach***. As a result, it turns out that the 8+ C-60 beam of 200 uA is acceptable.
* K.Takayama, et. al, Phys. Rev. ST Accel. Beams 18, 050101 (2015).
** Taufik, et. al, sub. to Phys. Rev. AB (2018).
*** Taufik, K.Takayama, and T. Adachi, sub. Phys. Rev. AB (2019).
 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW029  
About • paper received ※ 14 May 2019       paper accepted ※ 21 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRXXPLM3 Development of a Pulsed Power Supply Utilizing 13 kV Class SiC-MOSFET 4364
 
  • K. Okamura, F. Naito, K. Takayama
    KEK, Ibaraki, Japan
  • K. Fukuda, H. Kitai, K. Sakamoto
    AIST, Tsukuba, Ibaraki, Japan
  • T. Kaito
    Chiba Institute of Technology, Narashino, Chiba, Japan
  • D. Kumamoto
    Nagaoka University of Technology, Nagaoka, Niigata, Japan
  • S. Lim, A. Tokuchi
    Pulsed Power Japan Laboratory Ltd., Kusatsu-shi Shiga, Japan
  
  Funding: A part of this work has been implemented under a joint research project of Tsukuba Power Electronics Constellation (TPEC).
To resolve the drawback of conventional thyratron switches, development of a semiconductor high voltage switch utilizing a 13 kV class SiC-MOSFET developed by Tsukuba Power Electronics Constellations (TPEC) is proceeding. At first, the device evaluation test was carried out with a resistive load circuit. With the conditions of drain voltage of 10 kV and load resistance of 1 kΩ, turn on loss Eon, turn off loss Eoff, rise time Tr and fall time Tf were 1.7 mJ, 1.1 mJ, 64 ns, and 75 ns, respectively. As to gate charge characteristics, required electric charge to increase gate source voltage from 0 V to 20 V was about 80 nC. Thereafter, the 2s-12p switch array was designed and assembled, where 12 MOSFETs are equally aligned on a circle shaped circuit board and two circuit boards are stacked in series. A 14 kV-490 A-5 us pulse with a rise time of 430 ns in the long pulse mode and a 18 kV-318 A-1 us pulse with a rise time of 289 ns in the short pulse mode were successfully demonstrated. This switch will be installed as a turn-off switch for the injec-tion ES kicker in the KEK-DA. 		 
slides icon Slides FRXXPLM3 [5.088 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLM3  
About • paper received ※ 15 May 2019       paper accepted ※ 21 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)