IPAC2019 - List of Authors (Sy, A.V.)

Paper	Title	Page
TUPTS077	Design of a High Gradient THz-Driven Electron Gun	2098
SUSPFO127	use link to see paper's listing under its alternate paper code
	S.M. Lewis, V.A. Dolgashev, A.A. Haase, E.A. Nanni, M.A.K. Othman, A.V. Sy, S.G. Tantawi SLAC, Menlo Park, California, USA D. Kim, E.I. Simakov LANL, Los Alamos, New Mexico, USA
	Funding: This work was supported by Department of Energy contract DE-AC02-76SF00515. This work was also supported by NSF grants PHY-1734015. We present the design of a high-gradient electron gun. The goal of this gun is to generate relativistic electrons using GV/m accelerating fields. The initial design is a standing-wave field-emission gun operating in the pi-mode with a cavity frequency of 110.08 GHz. A pulsed 110 GHz gyrotron oscillator will be used to drive the structure with power coupled in through a TM01 circular waveguide mode. The gun is machined in two halves which are bonded. This prototype will be used to characterize the electron beam and study RF breakdown at 110 GHz.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS077
About •	paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW078	Prototyping of Brazed mm-Wave Accelerating Structures	3764
	M.A.K. Othman, B.J. Angier, A.A. Haase, E.A. Nanni, M.R. Roux, A.V. Sy SLAC, Menlo Park, California, USA
	Funding: This work was supported by Department of Energy contract DE-AC02-76SF00515. This work was also supported by NSF grants PHY-1734015. Advanced fabrication and prototyping of metallic RF structures play a fundamental role in advancing accelerator technologies particularly at mm-wave and THz frequencies. With the scaling of the RF structure up to these frequencies, conventional fabrication techniques do not achieve the required accuracy and tolerances. Improved manufacturing techniques including diffusion bonding, brazing or clamping split-block geometries produce high quality structures when successfully implemented. However, in most schemes the resulting gap and irregularities at the iris result in a local field enhancement which is not desirable for high-gradient operation. Development of advanced split-block braze technique for THz accelerators was required for high quality miniature accelerators. A new braze technique was developed for W-band structures to control the flow of braze alloy, enabling fabrication of the first high-gradient brazed structures at mm-wave frequencies. This fabrication process has the potential to overcome consistent fabrication defects around the cell iris. Thin spacers were used to set the final gap between blocks during the braze process; while braze foil thickness is varied with minimal impact on the resulting frequency. To demonstrate the robustness of this technique, testing after the various manufacturing steps was done to monitor and track frequency change throughout the process. This technique is further pushed to produce G-band RF structures, operating at 300 GHz.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW078
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPTS077

Design of a High Gradient THz-Driven Electron Gun

2098

SUSPFO127

use link to see paper's listing under its alternate paper code

S.M. Lewis, V.A. Dolgashev, A.A. Haase, E.A. Nanni, M.A.K. Othman, A.V. Sy, S.G. Tantawi
SLAC, Menlo Park, California, USA
D. Kim, E.I. Simakov
LANL, Los Alamos, New Mexico, USA

Funding: This work was supported by Department of Energy contract DE-AC02-76SF00515. This work was also supported by NSF grants PHY-1734015.
We present the design of a high-gradient electron gun. The goal of this gun is to generate relativistic electrons using GV/m accelerating fields. The initial design is a standing-wave field-emission gun operating in the pi-mode with a cavity frequency of 110.08 GHz. A pulsed 110 GHz gyrotron oscillator will be used to drive the structure with power coupled in through a TM01 circular waveguide mode. The gun is machined in two halves which are bonded. This prototype will be used to characterize the electron beam and study RF breakdown at 110 GHz.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS077

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW078

Prototyping of Brazed mm-Wave Accelerating Structures

3764

M.A.K. Othman, B.J. Angier, A.A. Haase, E.A. Nanni, M.R. Roux, A.V. Sy
SLAC, Menlo Park, California, USA

Funding: This work was supported by Department of Energy contract DE-AC02-76SF00515. This work was also supported by NSF grants PHY-1734015.
Advanced fabrication and prototyping of metallic RF structures play a fundamental role in advancing accelerator technologies particularly at mm-wave and THz frequencies. With the scaling of the RF structure up to these frequencies, conventional fabrication techniques do not achieve the required accuracy and tolerances. Improved manufacturing techniques including diffusion bonding, brazing or clamping split-block geometries produce high quality structures when successfully implemented. However, in most schemes the resulting gap and irregularities at the iris result in a local field enhancement which is not desirable for high-gradient operation. Development of advanced split-block braze technique for THz accelerators was required for high quality miniature accelerators. A new braze technique was developed for W-band structures to control the flow of braze alloy, enabling fabrication of the first high-gradient brazed structures at mm-wave frequencies. This fabrication process has the potential to overcome consistent fabrication defects around the cell iris. Thin spacers were used to set the final gap between blocks during the braze process; while braze foil thickness is varied with minimal impact on the resulting frequency. To demonstrate the robustness of this technique, testing after the various manufacturing steps was done to monitor and track frequency change throughout the process. This technique is further pushed to produce G-band RF structures, operating at 300 GHz.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW078

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)