IPAC2019 - List of Authors (Sterbini, G.)

Paper	Title	Page
MOPMP052	Numerical Simulations of the DC Wire Prototypes in LHC for Enhancing the HL-LHC Performances	566
	A. Poyet Université Grenoble Alpes, Grenoble, France S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, K. Skoufaris, G. Sterbini CERN, Geneva, Switzerland
	For the last 15 years, the compensation of the Beam-Beam Long-Range (BBLR) interaction in colliders using DC wires has been studied. In 2015, in the frame of the HL-LHC project, it has been shown that a compensation of all the Resonance Driving Terms (RDTs) generated by the BBLR interaction is possible using wires with constraints on their transverse and longitudinal positions. In 2017, an experimental campaign has been launched in the present LHC, with wires installed in sub-optimal positions due to integration constraints. The aim of this paper is therefore to apply the formalism developped for HL-LHC to the LHC case and to compare the experimental results to the numerical tracking studies of the compensation using wires.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP052
About •	paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP053	Numerical Optimization of DC Wire Compensation in HL-LHC	570
	K. Skoufaris, S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, D. Pellegrini, A. Poyet, A. Rossi, G. Sterbini CERN, Geneva, Switzerland
	The electromagnetic field generated from a set of DC wires parallel to the beam opens the path to the compensation of the beam-beam long-range (BBLR) interactions for the future operation of large hadron colliders, in particular for the upcoming High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The effectiveness and simplicity of a current carrying wire are critical for overcoming some technical constraints of the machine. In order to better understand the potential of this device for the HL-LHC, various simulation studies are presented. The different observables are the dynamic aperture and the frequency analysis.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP053
About •	paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS085	Commissioning of a New Digital Transverse Damper System at the PSB	1050
	G.P. Di Giovanni, F. Antoniou, A. Blas, Y. Brischetto, A. Findlay, G. Kotzian, B. Mikulec, G. Sterbini CERN, Geneva, Switzerland
	At the CERN Proton Synchrotron Booster, PSB, an analog transverse damper system has been in operation since 1999, providing satisfactory operational results with the proton beam supplied by Linac2. As a consequence of the LHC Injectors Upgrade, the PSB will face new challenges imposed by higher intensity, injection and extraction energy. In this framework, the transverse feedback system is subject to an upgrade to adapt to the expected Linac4 beam and to the demands for new features including transverse blow-up, beam excitation for optics measurements and new remote control and monitoring capabilities. The replacement of the aging electronic hardware is also recommended to improve the system maintainability for future years. During 2018 a new digital transverse feedback electronics was installed in the PSB, in parallel with the current operational one, offering for the first time the occasion to demonstrate its performance with beam. Encouraging results were obtained such as the suppression of beam instabilities at all PSB energies and intensities. In this paper we describe the steps undertaken in 2018 in order to commission the system with the main goal to accelerate and extract the highest intensity beams produced at the PSB.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS085
About •	paper received ※ 06 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM3	First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC	2262
	G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos CERN, Geneva, Switzerland D. Amorim Grenoble-INP Phelma, Grenoble, France M. Fitterer, A. Valishev Fermilab, Batavia, Illinois, USA D. Kaltchev TRIUMF, Vancouver, Canada S. Kostoglou National Technical University of Athens, Zografou, Greece A.E. Levichev BINP SB RAS, Novosibirsk, Russia A. Poyet Université Grenoble Alpes, Grenoble, France
	The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.
	Slides WEYYPLM3 [6.371 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3
About •	paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Numerical Simulations of the DC Wire Prototypes in LHC for Enhancing the HL-LHC Performances

566

A. Poyet
Université Grenoble Alpes, Grenoble, France
S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, K. Skoufaris, G. Sterbini
CERN, Geneva, Switzerland

For the last 15 years, the compensation of the Beam-Beam Long-Range (BBLR) interaction in colliders using DC wires has been studied. In 2015, in the frame of the HL-LHC project, it has been shown that a compensation of all the Resonance Driving Terms (RDTs) generated by the BBLR interaction is possible using wires with constraints on their transverse and longitudinal positions. In 2017, an experimental campaign has been launched in the present LHC, with wires installed in sub-optimal positions due to integration constraints. The aim of this paper is therefore to apply the formalism developped for HL-LHC to the LHC case and to compare the experimental results to the numerical tracking studies of the compensation using wires.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP052

About •

paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP053

Numerical Optimization of DC Wire Compensation in HL-LHC

570

K. Skoufaris, S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, D. Pellegrini, A. Poyet, A. Rossi, G. Sterbini
CERN, Geneva, Switzerland

The electromagnetic field generated from a set of DC wires parallel to the beam opens the path to the compensation of the beam-beam long-range (BBLR) interactions for the future operation of large hadron colliders, in particular for the upcoming High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The effectiveness and simplicity of a current carrying wire are critical for overcoming some technical constraints of the machine. In order to better understand the potential of this device for the HL-LHC, various simulation studies are presented. The different observables are the dynamic aperture and the frequency analysis.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP053

About •

paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS085

Commissioning of a New Digital Transverse Damper System at the PSB

1050

G.P. Di Giovanni, F. Antoniou, A. Blas, Y. Brischetto, A. Findlay, G. Kotzian, B. Mikulec, G. Sterbini
CERN, Geneva, Switzerland

At the CERN Proton Synchrotron Booster, PSB, an analog transverse damper system has been in operation since 1999, providing satisfactory operational results with the proton beam supplied by Linac2. As a consequence of the LHC Injectors Upgrade, the PSB will face new challenges imposed by higher intensity, injection and extraction energy. In this framework, the transverse feedback system is subject to an upgrade to adapt to the expected Linac4 beam and to the demands for new features including transverse blow-up, beam excitation for optics measurements and new remote control and monitoring capabilities. The replacement of the aging electronic hardware is also recommended to improve the system maintainability for future years. During 2018 a new digital transverse feedback electronics was installed in the PSB, in parallel with the current operational one, offering for the first time the occasion to demonstrate its performance with beam. Encouraging results were obtained such as the suppression of beam instabilities at all PSB energies and intensities. In this paper we describe the steps undertaken in 2018 in order to commission the system with the main goal to accelerate and extract the highest intensity beams produced at the PSB.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS085

About •

paper received ※ 06 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM3

First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC

2262

G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos
CERN, Geneva, Switzerland
D. Amorim
Grenoble-INP Phelma, Grenoble, France
M. Fitterer, A. Valishev
Fermilab, Batavia, Illinois, USA
D. Kaltchev
TRIUMF, Vancouver, Canada
S. Kostoglou
National Technical University of Athens, Zografou, Greece
A.E. Levichev
BINP SB RAS, Novosibirsk, Russia
A. Poyet
Université Grenoble Alpes, Grenoble, France

The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.

Slides WEYYPLM3 [6.371 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3

About •

paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)