| Paper | Title | Page |
|---|---|---|
| THPTS058 | New 50 KW SSPA Transmitter for the ALBA Booster | 4237 |
|
||
| ALBA is a 3th generation 3 GeV synchrotron light source located in Barcelona and operating with users since May 2012. The IOT based transmitter for the booster cavity has been replaced by a Solid State Power Amplifier (SSPA) of 50 kW at 500 MHz in August 2018. The new transmitter is made of 96 active devices, which are divided in 12 modules of 8 transistors each one. The modules are combined in groups of four using the Gysel topology and two hybrid combiners are used for the final combining stage. The design allows the transmitter to provide enough power even when multiple transistor fails occur, in the same module or in different ones, and it also presents power supplies redundancy. These modules can be hot swapped, i.e., the module can be replaced by a spare at any time, even when the transmitter is providing power without affecting the operation. After two months of operation, the transmitter fulfills very well the design specifications regarding power, efficiency and gain; and although minor problems have arisen due to infant mortality in some components, the operation of the transmitter has never been affected due to the high redundancy. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS058 | |
| About • | paper received ※ 15 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPTS059 | Development of a 1.5 GHz, 1 KW Solid State Power Amplifier for 3rd Harmonic System of the Alba Storage Ring | 4240 |
|
||
|
ALBA is the Spanish third generation synchrotron light source, located near Barcelona, in operation since 2012. In order to improve the operation, a third harmonic system has been designed for the Storage Ring in order to stretch the bunch length, and so, improve the beam life time and increase the stability current thresholds. The design of the system consist of four Higher Order Mode (HOM) damped normal conductive active cavities at 1.5 GHz*, feed with 20 kW of RF power each cavity, in order to provide the voltage of 1 MV to the electron beam. The 20 kW RF power transmitter system is based on 250 W solid state power amplifier modules added in parallel by a tree combination technique. The selected combination tree divides the 20 kW overall power per cavity in twenty 1 kW crates. This paper presents the designs of the 250 W power amplifier modules, of the splitter and of the combiner, as well as the measurement results of a 1 kW prototype crate.
* HOM Damped Normal Conducting 1.5 GHz Cavity for the 3rd Harmonic System of the ALBA Storage Ring. IPAC 2019 proceedings |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS059 | |
| About • | paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |