| Paper | Title | Page |
|---|---|---|
| TUPRB096 | Test of an X-ray Cavity using Double-Bunches from the LCLS Cu-Linac | 1887 |
|
||
|
Funding: This work is supported by U.S. DOE, Office of Science, Office of BES, under Contract No. DE-AC02-06CH11357 (ANL) and DE-AC02-76SF00515 (SLAC). We discuss a proposal to test the operation of an X-ray cavity consisting of Bragg reflectors. The test will con-stitute a major step demonstrating the feasibility of either an X-ray regenerative amplifier FEL or an X-ray FEL Oscillator. These cavity-based X-ray FELs will provide the full temporal coherence lacking in the SA-SE FELs. An X-ray cavity of rectangular path will be constructed around the first seven LCLS-II undulator units. The Cu-linac will produce a pair of electron bunches separated by the cavity-round-trip distance during each linac cycle. The X-ray pulse produced by the first bunch is deflected into the cavity and returns to the undulator where it is amplified due to the presence of the second bunch. The key challenges are: the preci-sion of the cavity mechanical construction, the quality of the diamond crystals, and the electron beam stability. When the LCLS-II super-conducting linac becomes available, the cavity can then be used for high-repetition rate studies of the X-ray RAFEL and XFELO concepts. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB096 | |
| About • | paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPGW089 | Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL | 3782 |
|
||
|
Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357 As a part of the Argonne Strategic Partnership Project (SPP) 85H21, a collaboration between Advanced Photon Source (APS), Argonne National Laboratory (ANL) and Pohang Accelerator Laboratory (PAL), we have designed, constructed, and tested a thin-film-diamond monochromator for the PAL X-ray Free-Electron-Laser (PAL-XFEL) hard x-ray self-seeding project*. The mechanical design of the PAL-XFEL diamond crystal hard x-ray self-seeding monochromator is based on the APS design of a diamond-crystal monochromator for the LCLS hard x-ray self-seeding project** with enhanced diamond crystal holder for two thin-film-diamond crystals with thicknesses of 30 microns and 100 microns***. The customized high quality thin-film-diamonds and special graphite holder were provided by the Technological Institute for Super-hard and Novel Carbon Materials of Russia (TISNCM)****, and tested at the APS***. An in-vacuum multi-axis precision positioning mechanism is designed to manipulate the duo-thin-film diamonds holder with resolutions and stabilities required by the hard x-ray self-seeding physics. Mechanical specifications, designs, and preliminary test results of the diamond monochromator are presented in this paper. *Chang-Ki Min, et al, sub. J. Sync. Rad., 2018 **D. Shu, et al, J. Phys.: Conf. Ser. 425 (2013) 052004 ***Y. Shvyd’ko, et al, FEL2017, Santa Fe ****Polyakov S, et. al, 2011 Diam. Rel. Mat. 20 726 |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW089 | |
| About • | paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |