IPAC2019 - List of Authors (Seimiya, Y.)

Paper	Title	Page
MOPMP003	Positron Source for FCC-ee	424
	I. Chaikovska, R. Chehab, A. Faus-Golfe, Y. Han LAL, Orsay, France A. Apyan ANSL, Yerevan, Armenia Y. Enomoto, K. Furukawa, T. Kamitani, F. Miyahara, M. Satoh, Y. Seimiya, T. Suwada KEK, Ibaraki, Japan P.V. Martyshkin BINP SB RAS, Novosibirsk, Russia S. Ogur, K. Oide, Y. Papaphilippou, L. Rinolfi, P. Sievers, F. Zimmermann CERN, Meyrin, Switzerland
	The FCC-ee is a high-luminosity, high-precision circular collider to be constructed in a new 100 km tunnel in the Geneva area. The physics case is well established and the FCC-ee operation is foreseen at 91 GeV (Z-pole), 160 GeV (W pair production threshold), 240 GeV (Higgs resonance) and 365 GeV (t-tbar threshold). Due to the large 6D production emittance and important thermal load in the production target, the positron injector, in particular the positron source, is one of the key elements of the FCC-ee, requiring special attention. To ensure high reliability of the positron source, conventional and hybrid targets are currently under study. The final choice of the positron target will be made based on the estimated performances. In this framework, we present a preliminary design of the FCC-ee positron source, with detailed simulation studies of positron production, capture and primary acceleration.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP003
About •	paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP008	Electron Driven Positron Source for International Linear Collider	439
	M. Kuriki, T. Okugi, T. Omori, M. Satoh, Y. Seimiya, J. Urakawa, K. Yokoya KEK, Ibaraki, Japan H. Nagoshi HU/AdSM, Higashi-Hiroshima, Japan K. Negishi Iwate University, Morioka, Iwate, Japan Y. Sumitomo LEBRA, Funabashi, Japan T. Takahashi Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
	Funding: This work is partly supported by Japan-US Cooperative grant for scientific studies, Grant aid for scientific study by MEXT Japan (KAKENHI) To linear colliders, huge amount of positron has to be provided comparing to ring colliders, because the beam is dumped after the collision. Electron Driven ILC Positron source has been designed as a technical backup of the undulator position source including the beam loading effect, etc. The design of the detail will be presented. To linear colliders, huge amount of positron has to be provided comparing to ring colliders, because the beam is dumped after the collision. Electron Driven ILC Positron source has been designed as a technical backup of the undulator position source including the beam loading effect, etc. The design of the detail will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP008
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP009	Effect of Initial Parameters on the Super Flat Beam Generation with the Phase-Space Rotation for Linear Colliders	442
	M. Kuriki, R. Tamura HU/AdSM, Higashi-Hiroshima, Japan H. Hayano, X.J. Jin, T. Konomi, Y. Seimiya, N. Yamamoto KEK, Ibaraki, Japan S. Kashiwagi Tohoku University, Research Center for Electron Photon Science, Sendai, Japan P. Piot Northern Illinois University, DeKalb, Illinois, USA J.G. Power ANL, Argonne, Illinois, USA K. Sakaue The University of Tokyo, The School of Engineering, Tokyo, Japan M. Washio RISE, Tokyo, Japan
	Funding: This work is partly supported by Japan-US Cooperative grant for scientific studies, Grant aid for scientific study by MEXT Japan (KAKENHI) Kiban B. Linear collider is a concept to realize e⁺e⁻ collision beyond the limitation of the ring colliders by the synchrotron radiation. To obtain an enough luminosity, eg. 1.0·10⁺³⁴ cm^-2sec^-1, the beam is focused down to nano-meter size with a high aspect ratio. This super flat beam is useful to improve the luminosity and to compensate the beam-beam effect, eg. Beamstrahlung. In a conventional design, the super-flat beam is produced by radiation damping in a storage ring. We propose to produce this super-flat beam with phase-space rotation techniques. We employ both Round to Flat Beam Transformation and Transverse to Longitudinal Emittance eXchange, the super flat beam can be generated by controlling the space-charge effect which spoiled the performance. We present the RFBT performance with respect to the initial conditions, i.e. beam size, initial emittance, solenoid field (strength and profile), etc.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP009
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Positron Source for FCC-ee

424

I. Chaikovska, R. Chehab, A. Faus-Golfe, Y. Han
LAL, Orsay, France
A. Apyan
ANSL, Yerevan, Armenia
Y. Enomoto, K. Furukawa, T. Kamitani, F. Miyahara, M. Satoh, Y. Seimiya, T. Suwada
KEK, Ibaraki, Japan
P.V. Martyshkin
BINP SB RAS, Novosibirsk, Russia
S. Ogur, K. Oide, Y. Papaphilippou, L. Rinolfi, P. Sievers, F. Zimmermann
CERN, Meyrin, Switzerland

The FCC-ee is a high-luminosity, high-precision circular collider to be constructed in a new 100 km tunnel in the Geneva area. The physics case is well established and the FCC-ee operation is foreseen at 91 GeV (Z-pole), 160 GeV (W pair production threshold), 240 GeV (Higgs resonance) and 365 GeV (t-tbar threshold). Due to the large 6D production emittance and important thermal load in the production target, the positron injector, in particular the positron source, is one of the key elements of the FCC-ee, requiring special attention. To ensure high reliability of the positron source, conventional and hybrid targets are currently under study. The final choice of the positron target will be made based on the estimated performances. In this framework, we present a preliminary design of the FCC-ee positron source, with detailed simulation studies of positron production, capture and primary acceleration.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP003

About •

paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP008

Electron Driven Positron Source for International Linear Collider

439

M. Kuriki, T. Okugi, T. Omori, M. Satoh, Y. Seimiya, J. Urakawa, K. Yokoya
KEK, Ibaraki, Japan
H. Nagoshi
HU/AdSM, Higashi-Hiroshima, Japan
K. Negishi
Iwate University, Morioka, Iwate, Japan
Y. Sumitomo
LEBRA, Funabashi, Japan
T. Takahashi
Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan

Funding: This work is partly supported by Japan-US Cooperative grant for scientific studies, Grant aid for scientific study by MEXT Japan (KAKENHI)
To linear colliders, huge amount of positron has to be provided comparing to ring colliders, because the beam is dumped after the collision. Electron Driven ILC Positron source has been designed as a technical backup of the undulator position source including the beam loading effect, etc. The design of the detail will be presented. To linear colliders, huge amount of positron has to be provided comparing to ring colliders, because the beam is dumped after the collision. Electron Driven ILC Positron source has been designed as a technical backup of the undulator position source including the beam loading effect, etc. The design of the detail will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP008

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP009

Effect of Initial Parameters on the Super Flat Beam Generation with the Phase-Space Rotation for Linear Colliders

442

M. Kuriki, R. Tamura
HU/AdSM, Higashi-Hiroshima, Japan
H. Hayano, X.J. Jin, T. Konomi, Y. Seimiya, N. Yamamoto
KEK, Ibaraki, Japan
S. Kashiwagi
Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
P. Piot
Northern Illinois University, DeKalb, Illinois, USA
J.G. Power
ANL, Argonne, Illinois, USA
K. Sakaue
The University of Tokyo, The School of Engineering, Tokyo, Japan
M. Washio
RISE, Tokyo, Japan

Funding: This work is partly supported by Japan-US Cooperative grant for scientific studies, Grant aid for scientific study by MEXT Japan (KAKENHI) Kiban B.
Linear collider is a concept to realize e⁺e⁻ collision beyond the limitation of the ring colliders by the synchrotron radiation. To obtain an enough luminosity, eg. 1.0·10⁺³⁴ cm^-2sec^-1, the beam is focused down to nano-meter size with a high aspect ratio. This super flat beam is useful to improve the luminosity and to compensate the beam-beam effect, eg. Beamstrahlung. In a conventional design, the super-flat beam is produced by radiation damping in a storage ring. We propose to produce this super-flat beam with phase-space rotation techniques. We employ both Round to Flat Beam Transformation and Transverse to Longitudinal Emittance eXchange, the super flat beam can be generated by controlling the space-charge effect which spoiled the performance. We present the RFBT performance with respect to the initial conditions, i.e. beam size, initial emittance, solenoid field (strength and profile), etc.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP009

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)