IPAC2019 - List of Authors (Schwarz, M.)

Paper	Title	Page
MOZZPLM1	Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac	33
	M. Miski-Oglu, K. Aulenbacher, V. Gettmann, T. Kürzeder HIM, Mainz, Germany K. Aulenbacher, F.D. Dziuba IKP, Mainz, Germany W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, A. Rubin, A. Schnase, S. Yaramyshev GSI, Darmstadt, Germany W.A. Barth, S. Yaramyshev MEPhI, Moscow, Russia M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany
	During successful beam commissioning of the superconducting 15-gap Crossbar H-mode cavity at GSI Helmholtzzentrum für Schwerionenforschung heavy ions up to the design beam energy have been accelerated. The design acceleration gain of 3.5 MeV inside a length of less than 70 cm has been reached with full transmission for heavy ion beams of up to 1.5 particle mueA. The measured beam parameters confirm sufficient beam quality. The machine beam commissioning is a major milestone of the R&D for the superconducting heavy ion continuous wave linear accelerator HELIAC of Helmholtz Institute Mainz (HIM) and GSI developed in collaboration with IAP Goethe-University Frankfurt. The next step is the procurement and commissioning of so called ’Advanced Demonstrator’ - the first of series cryo module for the entire accelerator HELIAC. Results of further Demonstrator beam tests, as well as the status of the Advanced demonstrator project will be reported.
	Slides MOZZPLM1 [3.088 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOZZPLM1
About •	paper received ※ 29 April 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS027	Conceptual Design of the Proton LINAC for the High Brilliance Neutron Source HBS	910
	H. Podlech, M. Droba, K. Kümpel, S. Lamprecht, O. Meusel, N.F. Petry, P.P. Schneider, M. Schwarz IAP, Frankfurt am Main, Germany J. Baggemann, Th. Brückel, T. Cronert, P.-E. Doege, T. Gutberlet, E. Mauerhofer, U. Rücker, P. Zakalek JCNS, Jülich, Germany S. Böhm NET, Aachen, Germany J. Li IEK, Jülich, Germany C. Zhang GSI, Darmstadt, Germany
	Due to the decommissioning of several research reactors there will be a severe drop in available neutrons for research in Europe in the next decade despite the commissioning of the European Spallation Source (ESS). Compact accelerator-based neutron sources (CANS) could close this gap. The High Brilliance Neutron Source (HBS) currently under development at Forschungszentrum Jülich is scalable in terms of beam energy and power due to its modular design. The driver Linac for HBS at will accelerate a 100 mA proton beam to 70 MeV. The Linac is operated with a beam duty cycle of up to 6% (11% RF duty cycle) and can simultaneously deliver three proton pulse lengths (384 Hz@52 mu-s, 96 Hz@208 mu-s and 24 Hz@832 mu-s) for three neutron production targets. In order to minimize the development effort and the technological risk, state-of-the-art technology of the MYRRHA injector is used. The front end of the HBS Linac consists of an ECR source, LEBT and a 2.5 MeV RFQ followed by a CH-DTL with 35 room temperature CH-cavities. All RF structures are operated at 176.1 MHz and are designed for high duty cycle. Solid-state amplifiers up to 500 kW are used as RF drivers. Due to the beam current and the high average beam power of up to 420 kW, particular attention is paid to beam dynamics. In order to minimize losses, a quasi-periodic lattice with constant negative phase is used. The contribution describes the conceptual design and the challenges of such a modern high power proton accelerator with high reliability and availability.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS027
About •	paper received ※ 07 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS034	Advanced Beam Dynamics Design for the Superconducting Heavy Ion Accelerator HELIAC	928
SUSPFO024	use link to see paper's listing under its alternate paper code
	M. Schwarz, M. Basten, M. Busch, T. Conrad, H. Podlech IAP, Frankfurt am Main, Germany K. Aulenbacher IKP, Mainz, Germany K. Aulenbacher, W.A. Barth, C. Burandt, M. Heilmann, S. Lauber, J. List, A. Rubin, S. Yaramyshev GSI, Darmstadt, Germany K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu HIM, Mainz, Germany S. Lauber, J. List KPH, Mainz, Germany
	Funding: Work supported by BMBF contr. No. 05P18RFRB1, EU Framework Programme H₂020 662186 (MYRTE) and HIC for FAIR The standalone superconducting (SC) continuous wave (CW) heavy ion linac HELIAC (HElmholtz LInear ACcelerator) is a common project of GSI and HIM under key support of IAP Frankfurt and in collaboration with Moscow Engineering Physics Institute (MEPhI) and Moscow Institute for Theoretical and Experimental Physics (KI-ITEP). It is intended for future experiments with heavy ions near the Coulomb barrier within super-heavy element (SHE) research and aims at developing a linac with multiple CH cavities as key components downstream the High Charge State Injector (HLI) at GSI. The design is challenging due to the requirement of intense beams in CW mode up to a mass-to-charge ratio of 6, while covering a broad output energy range from 3.5 to 7.3 MeV/u with minimum energy spread. In 2017 the first superconducting section of the linac has been successfully commissioned and extensively tested with beam at GSI. In the light of experience gained in this research so far, the beam dynamics layout for the entire linac has recently been updated and optimized with particular emphasis on realistic assumptions of cavity gap and drift lengths as well as gap voltage distributions for CH3’CH11.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS034
About •	paper received ※ 30 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB012	Overview on SC CH-Cavity Development	2822
	M. Busch, M. Basten, T. Conrad, P. Müller, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany W.A. Barth, F.D. Dziuba, M. Miski-Oglu GSI, Darmstadt, Germany W.A. Barth, F.D. Dziuba, M. Miski-Oglu HIM, Mainz, Germany W.A. Barth MEPhI, Moscow, Russia F.D. Dziuba IKP, Mainz, Germany
	Funding: Work supported by GSI, HIC for FAIR, BMBF Contr. No. 05P18RFRB1 During the last decades an enermous effort has been put into the development of low beta structures for hadron acceleration worldwide. Since hadrons exhibit a very inert velocity gain due to their high mass this change in speed has to be taken into account when utilizing low beta cavities. At the Institute of Applied Physics (IAP), Frankfurt, Germany, five multi-cell CH-cavities (Crossbar H-Mode) have been developed and tested for different kind of applications so far. In addition to the successfully tested original 360 MHz prototype further structures envisaged for beam operation have been fabricated and tested. Overview, status and outlook of this cavity technology is topic of this contribution.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB012
About •	paper received ※ 08 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB014	Further RF Measurements on the Superconducting 217 MHz CH Demonstrator Cavity for a CW Linac at GSI	2826
	F.D. Dziuba, K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu HIM, Mainz, Germany K. Aulenbacher IKP, Mainz, Germany K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, J. Salvatore, A. Schnase, S. Yaramyshev GSI, Darmstadt, Germany M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany S. Lauber, J. List KPH, Mainz, Germany
	Funding: Work supported by GSI, HIM, BMBF Contr. No. 05P18UMRB2 Recently, the first section of the superconducting (sc) continuous wave (cw) Linac has been extensively tested with heavy ion beam from the GSI High Charge State Injector (HLI). During this testing phase, the reliable operability of 217 MHz multi gap crossbar-H-mode (CH) cavities has been successfully demonstrated. The sc 217 MHz CH cavity (CH⁰) of the demonstrator setup accelerated heavy ions up to the design beam energy and even beyond at high beam intensities and full transmission. This worldwide first beam test with a sc CH cavity is a major milestone on the way realizing the entire sc cw Linac project. In this contribution further RF measurements on the cavity are presented providing full characterization of the RF structure.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB014
About •	paper received ※ 26 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac

33

M. Miski-Oglu, K. Aulenbacher, V. Gettmann, T. Kürzeder
HIM, Mainz, Germany
K. Aulenbacher, F.D. Dziuba
IKP, Mainz, Germany
W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, A. Rubin, A. Schnase, S. Yaramyshev
GSI, Darmstadt, Germany
W.A. Barth, S. Yaramyshev
MEPhI, Moscow, Russia
M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany

During successful beam commissioning of the superconducting 15-gap Crossbar H-mode cavity at GSI Helmholtzzentrum für Schwerionenforschung heavy ions up to the design beam energy have been accelerated. The design acceleration gain of 3.5 MeV inside a length of less than 70 cm has been reached with full transmission for heavy ion beams of up to 1.5 particle mueA. The measured beam parameters confirm sufficient beam quality. The machine beam commissioning is a major milestone of the R&D for the superconducting heavy ion continuous wave linear accelerator HELIAC of Helmholtz Institute Mainz (HIM) and GSI developed in collaboration with IAP Goethe-University Frankfurt. The next step is the procurement and commissioning of so called ’Advanced Demonstrator’ - the first of series cryo module for the entire accelerator HELIAC. Results of further Demonstrator beam tests, as well as the status of the Advanced demonstrator project will be reported.

Slides MOZZPLM1 [3.088 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOZZPLM1

About •

paper received ※ 29 April 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS027

Conceptual Design of the Proton LINAC for the High Brilliance Neutron Source HBS

910

H. Podlech, M. Droba, K. Kümpel, S. Lamprecht, O. Meusel, N.F. Petry, P.P. Schneider, M. Schwarz
IAP, Frankfurt am Main, Germany
J. Baggemann, Th. Brückel, T. Cronert, P.-E. Doege, T. Gutberlet, E. Mauerhofer, U. Rücker, P. Zakalek
JCNS, Jülich, Germany
S. Böhm
NET, Aachen, Germany
J. Li
IEK, Jülich, Germany
C. Zhang
GSI, Darmstadt, Germany

Due to the decommissioning of several research reactors there will be a severe drop in available neutrons for research in Europe in the next decade despite the commissioning of the European Spallation Source (ESS). Compact accelerator-based neutron sources (CANS) could close this gap. The High Brilliance Neutron Source (HBS) currently under development at Forschungszentrum Jülich is scalable in terms of beam energy and power due to its modular design. The driver Linac for HBS at will accelerate a 100 mA proton beam to 70 MeV. The Linac is operated with a beam duty cycle of up to 6% (11% RF duty cycle) and can simultaneously deliver three proton pulse lengths (384 Hz@52 mu-s, 96 Hz@208 mu-s and 24 Hz@832 mu-s) for three neutron production targets. In order to minimize the development effort and the technological risk, state-of-the-art technology of the MYRRHA injector is used. The front end of the HBS Linac consists of an ECR source, LEBT and a 2.5 MeV RFQ followed by a CH-DTL with 35 room temperature CH-cavities. All RF structures are operated at 176.1 MHz and are designed for high duty cycle. Solid-state amplifiers up to 500 kW are used as RF drivers. Due to the beam current and the high average beam power of up to 420 kW, particular attention is paid to beam dynamics. In order to minimize losses, a quasi-periodic lattice with constant negative phase is used. The contribution describes the conceptual design and the challenges of such a modern high power proton accelerator with high reliability and availability.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS027

About •

paper received ※ 07 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS034

Advanced Beam Dynamics Design for the Superconducting Heavy Ion Accelerator HELIAC

928

SUSPFO024

use link to see paper's listing under its alternate paper code

M. Schwarz, M. Basten, M. Busch, T. Conrad, H. Podlech
IAP, Frankfurt am Main, Germany
K. Aulenbacher
IKP, Mainz, Germany
K. Aulenbacher, W.A. Barth, C. Burandt, M. Heilmann, S. Lauber, J. List, A. Rubin, S. Yaramyshev
GSI, Darmstadt, Germany
K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu
HIM, Mainz, Germany
S. Lauber, J. List
KPH, Mainz, Germany

Funding: Work supported by BMBF contr. No. 05P18RFRB1, EU Framework Programme H₂020 662186 (MYRTE) and HIC for FAIR
The standalone superconducting (SC) continuous wave (CW) heavy ion linac HELIAC (HElmholtz LInear ACcelerator) is a common project of GSI and HIM under key support of IAP Frankfurt and in collaboration with Moscow Engineering Physics Institute (MEPhI) and Moscow Institute for Theoretical and Experimental Physics (KI-ITEP). It is intended for future experiments with heavy ions near the Coulomb barrier within super-heavy element (SHE) research and aims at developing a linac with multiple CH cavities as key components downstream the High Charge State Injector (HLI) at GSI. The design is challenging due to the requirement of intense beams in CW mode up to a mass-to-charge ratio of 6, while covering a broad output energy range from 3.5 to 7.3 MeV/u with minimum energy spread. In 2017 the first superconducting section of the linac has been successfully commissioned and extensively tested with beam at GSI. In the light of experience gained in this research so far, the beam dynamics layout for the entire linac has recently been updated and optimized with particular emphasis on realistic assumptions of cavity gap and drift lengths as well as gap voltage distributions for CH3’CH11.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS034

About •

paper received ※ 30 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB012

Overview on SC CH-Cavity Development

2822

M. Busch, M. Basten, T. Conrad, P. Müller, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany
W.A. Barth, F.D. Dziuba, M. Miski-Oglu
GSI, Darmstadt, Germany
W.A. Barth, F.D. Dziuba, M. Miski-Oglu
HIM, Mainz, Germany
W.A. Barth
MEPhI, Moscow, Russia
F.D. Dziuba
IKP, Mainz, Germany

Funding: Work supported by GSI, HIC for FAIR, BMBF Contr. No. 05P18RFRB1
During the last decades an enermous effort has been put into the development of low beta structures for hadron acceleration worldwide. Since hadrons exhibit a very inert velocity gain due to their high mass this change in speed has to be taken into account when utilizing low beta cavities. At the Institute of Applied Physics (IAP), Frankfurt, Germany, five multi-cell CH-cavities (Crossbar H-Mode) have been developed and tested for different kind of applications so far. In addition to the successfully tested original 360 MHz prototype further structures envisaged for beam operation have been fabricated and tested. Overview, status and outlook of this cavity technology is topic of this contribution.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB012

About •

paper received ※ 08 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB014

Further RF Measurements on the Superconducting 217 MHz CH Demonstrator Cavity for a CW Linac at GSI

2826

F.D. Dziuba, K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu
HIM, Mainz, Germany
K. Aulenbacher
IKP, Mainz, Germany
K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, J. Salvatore, A. Schnase, S. Yaramyshev
GSI, Darmstadt, Germany
M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany
S. Lauber, J. List
KPH, Mainz, Germany

Funding: Work supported by GSI, HIM, BMBF Contr. No. 05P18UMRB2
Recently, the first section of the superconducting (sc) continuous wave (cw) Linac has been extensively tested with heavy ion beam from the GSI High Charge State Injector (HLI). During this testing phase, the reliable operability of 217 MHz multi gap crossbar-H-mode (CH) cavities has been successfully demonstrated. The sc 217 MHz CH cavity (CH⁰) of the demonstrator setup accelerated heavy ions up to the design beam energy and even beyond at high beam intensities and full transmission. This worldwide first beam test with a sc CH cavity is a major milestone on the way realizing the entire sc cw Linac project. In this contribution further RF measurements on the cavity are presented providing full characterization of the RF structure.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB014

About •

paper received ※ 26 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)