IPAC2019 - List of Authors (Rossi, A.)

Paper	Title	Page
MOPMP053	Numerical Optimization of DC Wire Compensation in HL-LHC	570
	K. Skoufaris, S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, D. Pellegrini, A. Poyet, A. Rossi, G. Sterbini CERN, Geneva, Switzerland
	The electromagnetic field generated from a set of DC wires parallel to the beam opens the path to the compensation of the beam-beam long-range (BBLR) interactions for the future operation of large hadron colliders, in particular for the upcoming High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The effectiveness and simplicity of a current carrying wire are critical for overcoming some technical constraints of the machine. In order to better understand the potential of this device for the HL-LHC, various simulation studies are presented. The different observables are the dynamic aperture and the frequency analysis.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP053
About •	paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM3	First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC	2262
	G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos CERN, Geneva, Switzerland D. Amorim Grenoble-INP Phelma, Grenoble, France M. Fitterer, A. Valishev Fermilab, Batavia, Illinois, USA D. Kaltchev TRIUMF, Vancouver, Canada S. Kostoglou National Technical University of Athens, Zografou, Greece A.E. Levichev BINP SB RAS, Novosibirsk, Russia A. Poyet Université Grenoble Alpes, Grenoble, France
	The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.
	Slides WEYYPLM3 [6.371 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3
About •	paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW093	Commissioning of the Prototype for a New Gas Curtain Beam Profile Monitor Using Beam Induced Fluorescence for HL-LHC	2709
	A. Salehilashkajani, C.P. Welsch, H.D. Zhang The University of Liverpool, Liverpool, United Kingdom M. Ady, N. Chritin, J. Glutting, O.R. Jones, R. Kersevan, T. Marriott-Dodington, S. Mazzoni, A. Rossi, G. Schneider, R. Veness CERN, Meyrin, Switzerland P. Forck, S. Udrea GSI, Darmstadt, Germany C.P. Welsch, H.D. Zhang Cockcroft Institute, Warrington, Cheshire, United Kingdom
	Funding: This work is supported by the HLLHCUK project and the STFC Cockcroft Institute core grant No. ST/G008248/1. A new supersonic gas-jet curtain based beam profile monitor is under development for minimally invasive simultaneous transverse profile diagnostics of proton and electron beams, at pressures compatible with LHC. The monitor makes use of a thin gas-jet curtain angled at 45 degrees with respect to the charged particle beams. The fluorescence caused by the interaction between the curtain and the beam can then be detected using a dedicated imaging system to determine its transverse profile. This contribution details design features of the monitor, discusses the gas-jet curtain formation and presents various experimental tests, including profile measurements of an electron beam using nitrogen and neon curtains. The gas-jet density was estimated by correlating it with the number of photons detected by the camera. These measurements are then compared with results obtained using a movable pressure gauge. This monitor has been commissioned in collaboration with CERN, GSI and the University of Liverpool. It serves as a first prototype of a final design that will be placed in the LHC beam line to measure the profile of the proton beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW093
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW096	Development of Supersonic Gas-Sheet-Based Beam Profile Monitors	2717
	H.D. Zhang, C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom M. Ady, J. Glutting, O.R. Jones, T. Marriott-Dodington, S. Mazzoni, A. Rossi, G. Schneider, R. Veness CERN, Meyrin, Switzerland P. Forck, S. Udrea GSI, Darmstadt, Germany A. Salehilashkajani, C.P. Welsch, H.D. Zhang The University of Liverpool, Liverpool, United Kingdom
	Funding: HL-LHC project funded by STFC and CERN, and the STFC Cockcroft core grant No. ST/G008248/1. Non-destructive beam profile monitoring is very desirable, essentially for any particle accelerator but particularly for high-energy and high-intensity machines. Supersonic gas jet-based monitors, detecting either the ionization or fluorescence of a gas sheet interacting with the primary beam to be characterized, allow for minimally invasive measurements. They can also be used over a wide energy range, from keV to TeV beams. This contribution gives an overview of the jet-based ionization and fluorescence beam profile monitors which have been developed, built and tested at the Cockcroft Institute. It discusses gas sheet generation, vacuum considerations, choice of gas species and detection methods.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW096
About •	paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS048	Electron Beam Dynamics Simulation for Electron Lenses	3220
	S. Sadovich, A. Rossi CERN, Meyrin, Switzerland G. Stancari Fermilab, Batavia, Illinois, USA
	A test stand is under construction at CERN to study high perveance electron guns, electron beam dynamics, and electron beam diagnostics for electron lenses. It will be used to test electron guns for the Hollow Electron Lenses under consideration for beam halo control for High Luminosity LHC (CERN), and for the Space Charge Compensation at SIS18 (GSI) in the frame of the EU funded ARIES project. In order to prepare for this test stand, simulations will be presented and compared with experiments undertaken at the Fermilab (FNAL) electron lens test stand. These were conducted using a hollow electron gun, with the magnetic field configuration and beam current varied to study their effect. The impact of imperfections on the beam dynamics and overall quality of the electron beam will be discussed. A method for comparing experimental data with simulation is also presented to allow bench-marking of the computer models and simulation tools that will later be applied to the analysis of measurements performed at CERN.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS048
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Numerical Optimization of DC Wire Compensation in HL-LHC

570

K. Skoufaris, S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, D. Pellegrini, A. Poyet, A. Rossi, G. Sterbini
CERN, Geneva, Switzerland

The electromagnetic field generated from a set of DC wires parallel to the beam opens the path to the compensation of the beam-beam long-range (BBLR) interactions for the future operation of large hadron colliders, in particular for the upcoming High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The effectiveness and simplicity of a current carrying wire are critical for overcoming some technical constraints of the machine. In order to better understand the potential of this device for the HL-LHC, various simulation studies are presented. The different observables are the dynamic aperture and the frequency analysis.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP053

About •

paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM3

First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC

2262

G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos
CERN, Geneva, Switzerland
D. Amorim
Grenoble-INP Phelma, Grenoble, France
M. Fitterer, A. Valishev
Fermilab, Batavia, Illinois, USA
D. Kaltchev
TRIUMF, Vancouver, Canada
S. Kostoglou
National Technical University of Athens, Zografou, Greece
A.E. Levichev
BINP SB RAS, Novosibirsk, Russia
A. Poyet
Université Grenoble Alpes, Grenoble, France

The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.

Slides WEYYPLM3 [6.371 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3

About •

paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW093

Commissioning of the Prototype for a New Gas Curtain Beam Profile Monitor Using Beam Induced Fluorescence for HL-LHC

2709

A. Salehilashkajani, C.P. Welsch, H.D. Zhang
The University of Liverpool, Liverpool, United Kingdom
M. Ady, N. Chritin, J. Glutting, O.R. Jones, R. Kersevan, T. Marriott-Dodington, S. Mazzoni, A. Rossi, G. Schneider, R. Veness
CERN, Meyrin, Switzerland
P. Forck, S. Udrea
GSI, Darmstadt, Germany
C.P. Welsch, H.D. Zhang
Cockcroft Institute, Warrington, Cheshire, United Kingdom

Funding: This work is supported by the HLLHCUK project and the STFC Cockcroft Institute core grant No. ST/G008248/1.
A new supersonic gas-jet curtain based beam profile monitor is under development for minimally invasive simultaneous transverse profile diagnostics of proton and electron beams, at pressures compatible with LHC. The monitor makes use of a thin gas-jet curtain angled at 45 degrees with respect to the charged particle beams. The fluorescence caused by the interaction between the curtain and the beam can then be detected using a dedicated imaging system to determine its transverse profile. This contribution details design features of the monitor, discusses the gas-jet curtain formation and presents various experimental tests, including profile measurements of an electron beam using nitrogen and neon curtains. The gas-jet density was estimated by correlating it with the number of photons detected by the camera. These measurements are then compared with results obtained using a movable pressure gauge. This monitor has been commissioned in collaboration with CERN, GSI and the University of Liverpool. It serves as a first prototype of a final design that will be placed in the LHC beam line to measure the profile of the proton beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW093

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW096

Development of Supersonic Gas-Sheet-Based Beam Profile Monitors

2717

H.D. Zhang, C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom
M. Ady, J. Glutting, O.R. Jones, T. Marriott-Dodington, S. Mazzoni, A. Rossi, G. Schneider, R. Veness
CERN, Meyrin, Switzerland
P. Forck, S. Udrea
GSI, Darmstadt, Germany
A. Salehilashkajani, C.P. Welsch, H.D. Zhang
The University of Liverpool, Liverpool, United Kingdom

Funding: HL-LHC project funded by STFC and CERN, and the STFC Cockcroft core grant No. ST/G008248/1.
Non-destructive beam profile monitoring is very desirable, essentially for any particle accelerator but particularly for high-energy and high-intensity machines. Supersonic gas jet-based monitors, detecting either the ionization or fluorescence of a gas sheet interacting with the primary beam to be characterized, allow for minimally invasive measurements. They can also be used over a wide energy range, from keV to TeV beams. This contribution gives an overview of the jet-based ionization and fluorescence beam profile monitors which have been developed, built and tested at the Cockcroft Institute. It discusses gas sheet generation, vacuum considerations, choice of gas species and detection methods.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW096

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS048

Electron Beam Dynamics Simulation for Electron Lenses

3220

S. Sadovich, A. Rossi
CERN, Meyrin, Switzerland
G. Stancari
Fermilab, Batavia, Illinois, USA

A test stand is under construction at CERN to study high perveance electron guns, electron beam dynamics, and electron beam diagnostics for electron lenses. It will be used to test electron guns for the Hollow Electron Lenses under consideration for beam halo control for High Luminosity LHC (CERN), and for the Space Charge Compensation at SIS18 (GSI) in the frame of the EU funded ARIES project. In order to prepare for this test stand, simulations will be presented and compared with experiments undertaken at the Fermilab (FNAL) electron lens test stand. These were conducted using a hollow electron gun, with the magnetic field configuration and beam current varied to study their effect. The impact of imperfections on the beam dynamics and overall quality of the electron beam will be discussed. A method for comparing experimental data with simulation is also presented to allow bench-marking of the computer models and simulation tools that will later be applied to the analysis of measurements performed at CERN.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS048

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)