IPAC2019 - List of Authors (Placidi, M.)

Paper	Title	Page
WEPGW111	Design of Booster-to-Accumulator Transfer Line for Advanced Light Source Upgrade	2756
	C. Sun, Ph. Amstutz, T. Hellert, J.-Y. Jung, S.C. Leemann, J.R. Osborn, M. Placidi, C. Steier, C.A. Swenson, M. Venturini, W. Wan LBNL, Berkeley, California, USA
	Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. For the Advanced Light Source Upgrade, an on-axis swap-out injection is applied to exchange bunch trains between the storage ring and the accumulator ring. To replenish the accumulator ring before the swap-out injection, an electron beam from Linac is first injected into the ALS booster to ramp up the energy, and then transported to the accumulator through the Booster-to-Accumulator (BTA) transfer line. The design of the BTA transfer line is a challenging task as it has to fit within a tight space while accommodating the booster and accumulator rings at different elevations. Moreover, the BTA design needs to meet the optics boundary conditions and ideally minimize the size requirements of vacuum-chamber apertures. In this paper, we will present a design option of the BTA transfer line, which meets both space limitations and beam physics requirements.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW111
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of Booster-to-Accumulator Transfer Line for Advanced Light Source Upgrade

2756

C. Sun, Ph. Amstutz, T. Hellert, J.-Y. Jung, S.C. Leemann, J.R. Osborn, M. Placidi, C. Steier, C.A. Swenson, M. Venturini, W. Wan
LBNL, Berkeley, California, USA

Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
For the Advanced Light Source Upgrade, an on-axis swap-out injection is applied to exchange bunch trains between the storage ring and the accumulator ring. To replenish the accumulator ring before the swap-out injection, an electron beam from Linac is first injected into the ALS booster to ramp up the energy, and then transported to the accumulator through the Booster-to-Accumulator (BTA) transfer line. The design of the BTA transfer line is a challenging task as it has to fit within a tight space while accommodating the booster and accumulator rings at different elevations. Moreover, the BTA design needs to meet the optics boundary conditions and ideally minimize the size requirements of vacuum-chamber apertures. In this paper, we will present a design option of the BTA transfer line, which meets both space limitations and beam physics requirements.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW111

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)