| Paper |
Title |
Page |
| MOPTS043 |
ESS Related Activities at Elettra Sincrotrone Trieste |
953 |
| |
- A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
|
|
| |
Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043
|
|
| About • |
paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019 |
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| WEPRB022 |
RF System Upgrade for Elettra 2.0 |
2849 |
| |
- C. Pasotti, M. Bocciai, M. Rinaldi
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
|
|
| |
The Elettra 2.0 low emittance light source project has triggered the review of the installed RF system’s performances and the analyses of the new machine requirement. This study includes the imperative revamp of the RF power sources. The trade off between the best theoretical RF system design and the available room for installation and budget for Elettra 2.0 has been translated into the operational plan reported here. The first planned step is the installation of 100 kW 500 MHz solid state based transmitters.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB022
|
|
| About • |
paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019 |
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| THPTS102 |
Radio Frequency Power Stations for ESS LINAC Spoke Section |
4346 |
| |
- C. Pasotti, M. Cautero, T.N. Gucin
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
- C.A. Martins, R.A. Yogi
ESS, Lund, Sweden
|
|
| |
26 equivalent 400 kW Radio Frequency Power Station (RFPS) units will be provided by Elettra as part of the Italian in kind contribution to ESS. They will be installed in the LINAC "Spoke Section". Each RFPS will power a single superconducting spoke cavity in pulsed operation at 352.21 MHz. The RFPS is a complete system that operates unmanned, based on a combination of solid state and tetrode amplification’s stages. The tender specification, the RFPS main features and requested performances are reported here.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS102
|
|
| About • |
paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 |
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |