Paper |
Title |
Page |
TUPGW008 |
PERLE: A High Power Energy Recovery Facility |
1396 |
|
- W. Kaabi, I. Chaikovska, A. Stocchi, C. Vallerand
LAL, Orsay, France
- D. Angal-Kalinin, J.W. McKenzie, B.L. Militsyn, P.H. Williams
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- S.A. Bogacz, A. Hutton, F. Marhauser, R.A. Rimmer, C. Tennant
JLab, Newport News, Virginia, USA
- S. Bousson, D. Longuevergne, G. Olivier, G. Olry
IPN, Orsay, France
- O.S. Brüning, R. Calaga, L. Dassa, F. Gerigk, E. Jensen, P.A. Thonet
CERN, Geneva, Switzerland
- B. Hounsell, M. Klein, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
- E.B. Levichev, Yu.A. Pupkov
BINP SB RAS, Novosibirsk, Russia
|
|
|
PERLE is a proposed high power Energy Recovery Linac, designed on multi-turn configuration, based on SRF technology, to be hosted at Orsay-France in a col-laborative effort between local laboratories: LAL and IPNO, together with an international collaboration involv-ing today: CERN, JLAB, STFC ASTeC Daresbury, Liverpool University and BINP Novosibirsk. PERLE will be a unique leading edge facility designed to push advances in accelerator technology, to provide intense and highly flexible test beams for component development. In its final configuration, PERLE provides a 500 MeV elec-tron beam using high current (20 mA) acceleration during three passes through 801.6 MHz cavities. This presenta-tion outlines the technological choices, the lattice design and the main component descriptions.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW008
|
|
About • |
paper received ※ 19 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPTS006 |
Tests at High RF Power of the ESS Medium Beta Cryomodule Demonstrator |
1940 |
|
- P. Bosland, C. Arcambal, F. Ardellier, S. Berry, A. Bouygues, E. Cenni, G. Devanz, T. Hamelin, X. Hanus, O. Piquet, J.P. Poupeau, B. Renard, P. Sahuquet
CEA-DRF-IRFU, France
- C. Darve
ESS, Lund, Sweden
- P. Michelato
INFN/LASA, Segrate (MI), Italy
- G. Olivier, J.P. Thermeau
IPN, Orsay, France
|
|
|
CEA is in charge of the 30 elliptical medium and high-beta cryomodules to be installed in the ESS tunnel in Lund, Sweden. Before launching the assembly of the series cryomodules, CEA developed a medium-beta cryomodule technology demonstrator in a collaboration with IPNO, LASA and ESS. This paper briefly presents the cryomodule assembly and summarizes the main results of the high RF power tests performed in 2018 in a dedicated test stand in CEA Saclay. The main ESS requirements were reached: Eacc = 16.7 MV/m in cavities, Pforward = 1.1 MW in power couplers, RF pulses length = 3.6 ms at 14 Hz. The piezo tuners efficiently compensated the Lorentz forces detuning and could stabilize the accelerating field better than 1% over the full length of the expected ESS 2.86 ms beam pulse without any LLRF regulation system. Following this successful validation CEA started the assembly of the first ESS medium-beta series cryomodule
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS006
|
|
About • |
paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|