| Paper | Title | Page |
|---|---|---|
| TUPGW035 | A Highly Brilliant Compact 3 GeV Light Source Project in Japan | 1478 |
|
||
| A highly brilliant compact 3 GeV light source project was proposed in Japan. The light source would be constructed in Sendai, north-east part of Japan. It provides brilliant soft X-ray beam to widely cover wavelengths ranging from EUV to hard X-ray in Japan together with SPring-8. The accelerator system is now mostly designed except for several linac components and so on. We have chosen a 4-bend achromat lattice to achieve a low emittance keeping a small circumference with a rather relaxed space issue. The number of cells is 16 and the ring circumference is about 350 m. Number of available beam lines are 26 including short straight sections for multi-pole wigglers. Horizontal emittance is expected to be around 1.1 nmrad, and the maximum brilliance may exceed 1021 at 1 - 3 keV region with a stored current of 400 mA. The designs of many components such as vacuum chambers, magnets and monitors are employed from those studied for SPring-8 upgrade project. A full energy injector linac equipped with a thermionic gun and C-band accelerating structures is employed to produce sufficiently low emittance beams for efficient beam injections. The C-band system is adopted from those developed for XFEL SACLA with some modifications. In the future, the injector would be upgraded as an electron driver for SXFEL. Details of the project and accelerator system will be presented. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW035 | |
| About • | paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPGW036 | 1 mA Stable Energy Recovery Beam Operation with Small Beam Emittance | 1482 |
|
||
|
A compact energy-recovery linac (cERL) have been operating since 2013 at KEK to develop critical components for ERL facility. Details of design, construction and the result of initial commissioning are already reported*. This paper will describe the details of further improvements and researches to achieve higher averaged beam current of 1 mA with continuous-wave (CW) beam pattern. At first, to keep the small beam emittance produced by 500 kV DC-photocathode gun, tuning of low-energy beam transport is essential. Also, we found some components degrades the beam quality, i.e., a non-metallic mirror which disturbed the beam orbit. Other important aspects are the measurement and mitigation of the beam losses. Combination of beam collimator and tuning of the beam optics can improve the beam halo enough to operate with 1 mA stably. The cERL has been operated with beam energy at 20 MeV or 17.5 MeV and with beam rep-rate of 1300 MHz or 162.5 MHz depending on the purpose of experiments. In each operation, the efficiency of the energy recovery was confirmed to be better than 99.9 %.
* S. Sakanaka, et.al., Nucl. Instr. and Meth. A 877 (2017)197, https://doi.org/10.1016/j.nima.2017.08.051 |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW036 | |
| About • | paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMP014 | Digital Control System of High Precision Magnet Power Supply for SPring-8-II | 1259 |
|
||
| For the SPring-8 upgrade plan, SPring-8-II, a variety of magnet power supplies (PS) from 10 W to larger than 100 kW with a high current stability of about 10 ppm (pk-pk, typ.) are required. In order to develop the PSs within a given time and budget, we plan to use a common control system based on a digital control technology that can be adopted for the variety and the high precision PSs. The system consists of a high-precision analog-digital converter (ADC) circuit and a field programmable gate array (FPGA). Since the precision of the ADC circuit determines the current stability of the PS, we first developed the ADC circuit of high accuracy of less than 10 ppm (pk-pk). A proportional-integral (PI) control logic and a digital pulse width modulation (PWM) function was implemented in the FPGA firmware. These functions can be easily modified for each power supply by a desktop computer. We prototyped a DC power supply equipped with the newly developed digital feedback control system and confirmed that the current fluctuation was suppressed to less than 10 ppm (pk-pk). In the presentation, we will report the current status and future perspective of our power supply development including the evaluation results of the new circuits and the power supply we have developed. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPMP014 | |
| About • | paper received ※ 16 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |