| Paper | Title | Page |
|---|---|---|
| MOPGW038 | Collimator’s Impact Into the Transverse Emittance Growth at KEK Compact ERL | 174 |
|
||
| In high-intensity particle accelerators, unwanted trans-verse and longitudinal wakefields arise when the high-charge particle beam passes through the narrow chambers or locations with small transverse apertures, such as collimator jaws. Transverse wakefields impose a transverse kicks to the beam, changing its shape, and leading to the growth of the transverse emittance. Longitudinal wakes cause the beam energy losses, heating of the narrow chambers etc. In the present study we investigated the collimator’s impact to the beam. Thus, we evaluated the collimator’s wakefields through the CST simulations. We estimated the corresponding transverse kicks and longitudinal wakes. In the summary simulation results were cross-checked with correspondent analytical expressions. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW038 | |
| About • | paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPGW036 | 1 mA Stable Energy Recovery Beam Operation with Small Beam Emittance | 1482 |
|
||
|
A compact energy-recovery linac (cERL) have been operating since 2013 at KEK to develop critical components for ERL facility. Details of design, construction and the result of initial commissioning are already reported*. This paper will describe the details of further improvements and researches to achieve higher averaged beam current of 1 mA with continuous-wave (CW) beam pattern. At first, to keep the small beam emittance produced by 500 kV DC-photocathode gun, tuning of low-energy beam transport is essential. Also, we found some components degrades the beam quality, i.e., a non-metallic mirror which disturbed the beam orbit. Other important aspects are the measurement and mitigation of the beam losses. Combination of beam collimator and tuning of the beam optics can improve the beam halo enough to operate with 1 mA stably. The cERL has been operated with beam energy at 20 MeV or 17.5 MeV and with beam rep-rate of 1300 MHz or 162.5 MHz depending on the purpose of experiments. In each operation, the efficiency of the energy recovery was confirmed to be better than 99.9 %.
* S. Sakanaka, et.al., Nucl. Instr. and Meth. A 877 (2017)197, https://doi.org/10.1016/j.nima.2017.08.051 |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW036 | |
| About • | paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPGW037 | Systematic Measurements of the Coherent THz Spectra by Magnetic Bunch Compression at the Compact ERL | 1486 |
|
||
| Short electron bunch beam is one of the key elements of a Free Electron Laser (FEL) or intense THz coherent light source. The Energy Recovery Linac (ERL) has the strong advantage of operation of such an electron bunch at high repetition rate and is expected to increase the photon flux. At the Compact ERL in KEK site, we have demonstrated the magnetic bunch compression at the 180-degree return arc and measured the THz spectra of the Coherent Transition Radiation (CTR). This paper reports the revamped THz beamline and the improvement of the beam tuning as well as the systematic measurements of the THz spectra by magnetic bunch compression. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW037 | |
| About • | paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMP012 | New Industrial Application Beamline for the cERL in KEK | 3475 |
|
||
| The new beam line for the industrial applications is constructed at the cERL (compact Energy Recovery LINAC) in KEK. In these applications, only north straight sections of cERL consisting of injector and main LINAC will be used. The test for the radio isotope production and electron beam irradiation for the materials are firstly planned with very small beam current without energy recovery. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP012 | |
| About • | paper received ※ 11 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMP013 | Challenges Towards Industrialization of the ERL-FEL Light Source for EUV Lithography | 3478 |
|
||
| EUV Lithography is going to HVM (high volume manufacturing) stage with 250-W-class laser-produced plasma sources and it is important to develop a new-type EUV light source to meet future demand for higher power. Energy-recovery linac based free-electron lasers (ERL-FELs) are possible candidates of a high-power EUV light source that can distribute 1 kW power to multiple scanners simultaneously. In Japan, an ERL-FEL based EUV light source has been designed using available technologies without much development to demonstrate generation of EUV power more than 10 kW and the EUV-FEL Light Source Study Group for Industrialization has been established since 2015 to realize industrialization of the light source and the related items. For industrialization, high availability is essential as well as high power and reduction of the light source size is also required. In this paper, we will report an overview of the designed ERL-FEL light source for EUV lithography and some activities for the industrialization and describe considerations and developments for obtaining high availability and size reduction of the light source. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP013 | |
| About • | paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |