IPAC2019 - List of Authors (Matsumoto, H.)

Paper	Title	Page
THPTS028	Recent Improvements and Future Upgrades of the J-PARC Main Ring Kicker Systems	4167
	T. Sugimoto, K. Ishii, H. Matsumoto, T. Shibata KEK, Ibaraki, Japan
	J-PARC Main Ring provides 500kW proton beam to the long baseline neutrino oscillation experiment (T2K). In order to increase the beam intensity to improve the sensitivity of the CP violation study in neutrino sector, shorter repetition cycle and higher beam current are required. As part of the upgrade project, both injection and fast-extraction (Fx) kicker magnet systems have been improved. Air-cooled non-inductive ceramic resistors are used as the impedance-matching terminator for the injection kicker magnet. Power consumption and temperature rise of the termination resistor due to the beam induced current was simulated to optimize the number of parallel of the resistors. Efficiency of cooling fans was also simulated to improve the cooling ability. For the Fx kicker magnet, a fast charging power supply of the modulator was developed and deployed to shorten the charging period from 1.4 sec to 0.2 sec. This paper represents the simulation results, performance of the charging unit and future upgrade plans.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS028
About •	paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Recent Improvements and Future Upgrades of the J-PARC Main Ring Kicker Systems

4167

T. Sugimoto, K. Ishii, H. Matsumoto, T. Shibata
KEK, Ibaraki, Japan

J-PARC Main Ring provides 500kW proton beam to the long baseline neutrino oscillation experiment (T2K). In order to increase the beam intensity to improve the sensitivity of the CP violation study in neutrino sector, shorter repetition cycle and higher beam current are required. As part of the upgrade project, both injection and fast-extraction (Fx) kicker magnet systems have been improved. Air-cooled non-inductive ceramic resistors are used as the impedance-matching terminator for the injection kicker magnet. Power consumption and temperature rise of the termination resistor due to the beam induced current was simulated to optimize the number of parallel of the resistors. Efficiency of cooling fans was also simulated to improve the cooling ability. For the Fx kicker magnet, a fast charging power supply of the modulator was developed and deployed to shorten the charging period from 1.4 sec to 0.2 sec. This paper represents the simulation results, performance of the charging unit and future upgrade plans.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS028

About •

paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)