| Paper | Title | Page |
|---|---|---|
| TUPRB032 | The CompactLight Design Study Project | 1756 |
|
||
|
Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431 The H2020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032 | |
| About • | paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPTS055 | Design and Construction of 3D Helmholtz Coil System to Calibrate 3D Hall Probes | 4228 |
|
||
| In this paper we present the design of a system of 3D Helmholtz coils aimed to generate a magnetic field in any direction in a controlled way. The system is intended to be applied to the detailed characterisation of the response of 3D Hall probes as a function of the orientation of the measured field. The system will generate magnetic fields of up to 5 mT with an expected angular precision of 0.2 mrad. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS055 | |
| About • | paper received ※ 26 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPTS056 | New Undulator and Front End for XAIRA Beamline at ALBA | 4231 |
|
||
| A new microfocus beamline for macromolecular crystallography, XAIRA, is being built at ALBA synchrotron light source. The light source for this new beamline is an in-vacuum undulator that can reach the spectrum range from 4 keV up to 20 keV. The in-vacuum undulator was terndered in 2018 and awarded to Kyma-RI consortium, and will be delivered to ALBA in November 2019. The Front End has been designed accordingly. It was tendered in 2018 and awarded to FMB. It will be delivered along second semester of 2019. In this paper we present the ID and FE designs. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS056 | |
| About • | paper received ※ 11 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPTS057 | New Small Diameter Rotating Coil Shaft for Characterizing New Generation of Multipolar Magnets | 4234 |
|
||
| The proliferation of ultimate-light source facilities around the world has yielded the need of accurate characterization of small gap magnets. This also applies to multipolar magnets. Clearance diameters down to 10 mm for quadrupoless and sextupoles become to be used and need to be accurately measured. At these small gaps, the high order multipoles influence on electron beam dynamics is high, and it should be well characterized in order to guarantee a feasible operation of the accelerator. To face this challenge, ALBA magnetics measurement laboratory has developed a new rotating coil shaft with a diameter of 10 mm able to be introduced inside narrow-gap multipolar magnets. In this paper we present the design as well as the first characterization of such a device. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS057 | |
| About • | paper received ※ 11 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |