IPAC2019 - List of Authors (Lin, W.Y.)

Paper	Title	Page
TUPGW071	Optimization and Measurements on the Double Mini-Betay Lattice in the TPS Storage Ring	1567
	M.-S. Chiu, B.Y. Chen, C.H. Chen, J.Y. Chen, Y.-S. Cheng, P.C. Chiu, P.J. Chou, T.W. Hsu, K.H. Hu, J.C. Huang, P.Y. Huang, C.-C. Kuo, T.Y. Lee, C.Y. Liao, W.Y. Lin, Y.-C. Liu, H.-J. Tsai, F.H. Tseng NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) is capable of operat-ing in multi-bunch and single-bunch mode. To operate in a hybrid mode as requested by users, we developed a lattice with chromaticities of 0.8/2 (x/y) to provide higher single bunch currents. Beam dynamics simulations and lattice characterizations including dynamic aperture, frequency map analysis, tune shift with energy, tune shift with amplitude, and betatron coupling will be discussed in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW071
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW085	Development of Operating Alarm System at TPS	2684
	C.S. Huang, B.Y. Chen, C.K. Kuan, C.H. Kuo, T.Y. Lee, W.Y. Lin, S.Y. Perng, T.C. Tseng, H.S. Wang NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) has many subsystems which includes magnet, power supply, vacuum, RF system, insertion device, control system, etc. Therefore, the operational and system check procedures are complex. In this paper, we summarize the routine operational procedures and propose an integrated operational alarm system that gathers machine information and sets high/low warning and fault limits for various signals which can help operators to quickly identify abnormal subsystems, thereby reducing machinery down time. The alarm system also has a wide range of applications, such as the event recording that helps the analysis after event. This new alarm system interface clearly indicates the machine status and improves operational efficiency.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW085
About •	paper received ※ 15 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW087	Control System Studio to Monitor Front End and Beamlines Status as well as Light Source Stability	2687
	W.Y. Lin, B.Y. Chen, C.S. Huang, C.H. Kuo, T.Y. Lee NSRRC, Hsinchu, Taiwan
	The primary task during a shift change at the Taiwan Photon Source Accelerator Operations team is to know the exact status of the machine, so that problems can be discovered immediately and solved when the machine behaves abnormal. To provide a stable beam during top-up operation, it is necessary to monitor closely the stability of the light source, of front end areas and beamlines. Should any abnormality occur, the operator would initiate initial troubleshooting and adjustments, inform users and sub-system staff members and perform subsequent first anal-yses and system optimizations. In this article, we describe how to sort through the nec-essary information with the Control System Studio (CSS) design page. There are currently seven beamlines in operation at the Taiwan Photon Source (05, 09, 21, 23, 25, 41, 45) and more new beamlines will be added in the future. Com-pared with other tools, CSS is intuitive and easy to revise. No matter weather adding new parameters or changing settings, the operation team can quickly get familiar with the machine status and perform an interface upgrade.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW087
About •	paper received ※ 27 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS053	Frequency Map Measurements at the TPS	3240
	C.H. Chen, B.Y. Chen, J.Y. Chen, M.-S. Chiu, P.J. Chou, T.W. Hsu, B.Y. Huang, C.-C. Kuo, W.Y. Lin, Y.-C. Liu, H.-J. Tsai, F.H. Tseng NSRRC, Hsinchu, Taiwan
	Taiwan Photon Source (TPS) has been operated for several years since it’s first light in December 2014. TPS has achieved reliable routine operation at 500 mA with more than 10 hrs beam lifetime. The dynamic aperture measurements and associated Frequency Map Analyses (FMA) at TPS reveal the beam dynamics behavior with and without insertion devices. A preliminary measurement study by using the turn-by-turn BPMs and comparison with the model simulation results will be presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS053
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYYPLS3	A Remote-Controlled Robot-Car in the TPS Tunnel	3435
	T.Y. Lee, B.Y. Chen, T.W. Hsu, B.Y. Huang, C.H. Kuo, W.Y. Lin NSRRC, Hsinchu, Taiwan
	A remote-controlled robot-car named ’PhotonBot’ was put into the TPS accelerator tunnel and is equipped with a 360 degrees LiDAR for SLAM and navigation, two cameras for perception and first-person view, and a thermal imaging system. The robot can be remotely controlled and can send data to a remote PC through Wi-Fi. With SLAM, it can go more freely without being restricted to a designated path. In order to ensure it can work continuously, there is a wireless charging station in case of a low battery.
	Slides THYYPLS3 [18.013 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THYYPLS3
About •	paper received ※ 09 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB091	APPLICATION PROGRAMS FOR TPS BEAM TRIP ANALYSIS	4032
	B.Y. Chen, T.W. Hsu, B.Y. Huang, C.S. Huang, C.H. Kuo, T.Y. Lee, W.Y. Lin NSRRC, Hsinchu, Taiwan
	For the Taiwan Photon Source (TPS), the orbit inter-lock system is one of the most important machine pro-tection systems. It is the fastest and the most preferred system to detect abnormalities to prevent possible dam-ages caused by magnet power supply failures or subsys-tems failures. In order to monitor electron orbit changes during a beam trip, we developed the ’orbit monitoring and recording tool’, the ’TBT BPM analysis tool’ and the ’magnet power supply recording and analysis tool’ to assist us in the failure analysis as will be discussed in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB091
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optimization and Measurements on the Double Mini-Betay Lattice in the TPS Storage Ring

1567

M.-S. Chiu, B.Y. Chen, C.H. Chen, J.Y. Chen, Y.-S. Cheng, P.C. Chiu, P.J. Chou, T.W. Hsu, K.H. Hu, J.C. Huang, P.Y. Huang, C.-C. Kuo, T.Y. Lee, C.Y. Liao, W.Y. Lin, Y.-C. Liu, H.-J. Tsai, F.H. Tseng
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) is capable of operat-ing in multi-bunch and single-bunch mode. To operate in a hybrid mode as requested by users, we developed a lattice with chromaticities of 0.8/2 (x/y) to provide higher single bunch currents. Beam dynamics simulations and lattice characterizations including dynamic aperture, frequency map analysis, tune shift with energy, tune shift with amplitude, and betatron coupling will be discussed in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW071

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW085

Development of Operating Alarm System at TPS

2684

C.S. Huang, B.Y. Chen, C.K. Kuan, C.H. Kuo, T.Y. Lee, W.Y. Lin, S.Y. Perng, T.C. Tseng, H.S. Wang
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) has many subsystems which includes magnet, power supply, vacuum, RF system, insertion device, control system, etc. Therefore, the operational and system check procedures are complex. In this paper, we summarize the routine operational procedures and propose an integrated operational alarm system that gathers machine information and sets high/low warning and fault limits for various signals which can help operators to quickly identify abnormal subsystems, thereby reducing machinery down time. The alarm system also has a wide range of applications, such as the event recording that helps the analysis after event. This new alarm system interface clearly indicates the machine status and improves operational efficiency.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW085

About •

paper received ※ 15 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW087

Control System Studio to Monitor Front End and Beamlines Status as well as Light Source Stability

2687

W.Y. Lin, B.Y. Chen, C.S. Huang, C.H. Kuo, T.Y. Lee
NSRRC, Hsinchu, Taiwan

The primary task during a shift change at the Taiwan Photon Source Accelerator Operations team is to know the exact status of the machine, so that problems can be discovered immediately and solved when the machine behaves abnormal. To provide a stable beam during top-up operation, it is necessary to monitor closely the stability of the light source, of front end areas and beamlines. Should any abnormality occur, the operator would initiate initial troubleshooting and adjustments, inform users and sub-system staff members and perform subsequent first anal-yses and system optimizations. In this article, we describe how to sort through the nec-essary information with the Control System Studio (CSS) design page. There are currently seven beamlines in operation at the Taiwan Photon Source (05, 09, 21, 23, 25, 41, 45) and more new beamlines will be added in the future. Com-pared with other tools, CSS is intuitive and easy to revise. No matter weather adding new parameters or changing settings, the operation team can quickly get familiar with the machine status and perform an interface upgrade.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW087

About •

paper received ※ 27 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS053

Frequency Map Measurements at the TPS

3240

C.H. Chen, B.Y. Chen, J.Y. Chen, M.-S. Chiu, P.J. Chou, T.W. Hsu, B.Y. Huang, C.-C. Kuo, W.Y. Lin, Y.-C. Liu, H.-J. Tsai, F.H. Tseng
NSRRC, Hsinchu, Taiwan

Taiwan Photon Source (TPS) has been operated for several years since it’s first light in December 2014. TPS has achieved reliable routine operation at 500 mA with more than 10 hrs beam lifetime. The dynamic aperture measurements and associated Frequency Map Analyses (FMA) at TPS reveal the beam dynamics behavior with and without insertion devices. A preliminary measurement study by using the turn-by-turn BPMs and comparison with the model simulation results will be presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS053

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYYPLS3

A Remote-Controlled Robot-Car in the TPS Tunnel

3435

T.Y. Lee, B.Y. Chen, T.W. Hsu, B.Y. Huang, C.H. Kuo, W.Y. Lin
NSRRC, Hsinchu, Taiwan

A remote-controlled robot-car named ’PhotonBot’ was put into the TPS accelerator tunnel and is equipped with a 360 degrees LiDAR for SLAM and navigation, two cameras for perception and first-person view, and a thermal imaging system. The robot can be remotely controlled and can send data to a remote PC through Wi-Fi. With SLAM, it can go more freely without being restricted to a designated path. In order to ensure it can work continuously, there is a wireless charging station in case of a low battery.

Slides THYYPLS3 [18.013 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THYYPLS3

About •

paper received ※ 09 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB091

APPLICATION PROGRAMS FOR TPS BEAM TRIP ANALYSIS

4032

B.Y. Chen, T.W. Hsu, B.Y. Huang, C.S. Huang, C.H. Kuo, T.Y. Lee, W.Y. Lin
NSRRC, Hsinchu, Taiwan

For the Taiwan Photon Source (TPS), the orbit inter-lock system is one of the most important machine pro-tection systems. It is the fastest and the most preferred system to detect abnormalities to prevent possible dam-ages caused by magnet power supply failures or subsys-tems failures. In order to monitor electron orbit changes during a beam trip, we developed the ’orbit monitoring and recording tool’, the ’TBT BPM analysis tool’ and the ’magnet power supply recording and analysis tool’ to assist us in the failure analysis as will be discussed in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB091

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)