Paper | Title | Page |
---|---|---|
TUPGW016 | New Operation Regimes at the Storage Ring KARA at KIT | 1422 |
|
||
The storage ring Karlsruhe Research Accelerator (KARA) at KIT operates in a wide energy range from 0.5 to 2.5 GeV. Initially, the ring was designed to serve as a Light Source for synchrotron radiation facility ANKA. Since then different operation modes have been implemented at KARA: in particular, the double bend achromat (DBA) lattice with non-dispersive straight sections, the theoretical minimum emittance (TME) lattice with distributed dispersion, and different versions of low compaction factor optics with highly stretched dispersion function. Short bunches of a few ps pulse width are available at KARA. Low alpha optics have been tested and implemented in a wide operational range of the ring and are now routinely used at 1.3 GeV for studies of CSR-induced beam dynamics and THz bursting in the micro-bunching instability. Different non-linear effects, in particular, residual high order components of magnetic fields generated in insertion devices have been studied and cured. A new operation mode at high vertical tune implemented at KARA essentially improves beam performance during user operation as well as at low alpha regimes. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW016 | |
About • | paper received ※ 23 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPGW016 | Turn-by-Turn Horizontal Bunch Size and Energy Spread Studies at KARA | 2498 |
|
||
Funding: This work is funded by the BMBF under contract number: 05K16VKA The energy spread is an important beam dynamics parameter. It can be derived from measurements of the horizontal bunch size. At the KIT storage ring KARA a fast-gated camera is routinely used for horizontal bunch size measurements with a single-turn resolution for a limited time span. To overcome the limits of the current camera setup in respect to resolution and time span, a high-speed line array with up to 10 Mfps, the KALYPSO system, is foreseen as a successor. The KALYPSO versions range from 256-pixel to 1024-pixel and allow unlimited turn-by-turn imaging of a single bunch at KARA. We successfully tested such a system at our visible light diagnostics port and present first results in this contribution. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW016 | |
About • | paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPGW017 | Continuous Bunch-by-Bunch Reconstruction of Short Detector Pulses | 2501 |
|
||
Funding: This work is funded by the BMBF contract number: 05K16VKA The KAPTURE system (KArlsruhe Pulse Taking and Ultrafast Readout Electronics), developed at the Karlsruhe Institute of Technology (KIT), was designed to digitize detector pulses during multi-bunch operation at the KIT storage ring KARA (Karlsruhe Research Accelerator). KAPTURE provides digitization for pulses at rates of 500 MHz using up to 4 sampling points per pulse to record each bunch and each turn for potentially unlimited time. The new KAPTURE-2 system now provides eight sampling points per pulse, including baseline sampling between pulses, which allows improved reconstruction of the pulse shape. The advanced reconstruction of the pulse shape is realized with a highly parallelised implementation on GPU. The system will be used for the investigation on longitudinal beam dynamics e.g. by measuring instability induced CSR fluctuations or arrival time oscillations. This contribution will report on first results of the KAPTURE-2 system at KARA. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW017 | |
About • | paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPGW018 | An Ultra-Fast and Wide-Spectrum Linear Array Detector for High Repetition Rate and Pulsed Experiments | 2504 |
|
||
Funding: "BMBF: is funded by the BMBF contract number: 05K16VKA" (2016-2018) ("NeoDyn") Photon science research at accelerators is influenced radically by the developments of sensor and readout technologies for imaging. These technologies enable a wide range of applications in beam diagnostics, tomography and spectroscopy. The repetition rate of commercially available linear array detectors is a limiting factor for the emerging synchrotron applications. To overcome these limitations, KALYPSO(Karlsruhe Linear arraY detector for MHz rePetition rateSpectrOscopy), an ultra-fast and wide-field of view linear array detector operating at several mega-frames per second(Mfps), has been developed. A silicon micro-strip sensor is connected to custom cutting-edge front end ASICs to achieve unprecedented frame rate in continuous readout mode. In this contribution, the third generation of KALYPSO will be presented. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW018 | |
About • | paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPTS015 | Synchronous Measurements of Electron Bunches Under the Influence of the Microbunching Instability | 3119 |
|
||
Funding: This work has been supported by the German Federal Ministry of Education and Research (Grant No. 05K16VKA). We acknowledge the support by the Helmholtz International Research School for Teratronics. The microbunching instability is a longitudinal collective instability which occurs for short electron bunches in a storage ring above a certain threshold current. The instability leads to a charge modulation in the longitudinal phase space. The resulting substructures on the longitudinal bunch profile vary over time and lead to fluctuations in the emitted power of coherent synchrotron radiation (CSR). To study the underlying longitudinal dynamics on a turn-by-turn basis, the KIT storage ring KARA (Karlsruhe Research Accelerator) provides a wide variety of diagnostic systems. By synchronizing the single-shot electro-optical spectral decoding setup (longitudinal profile), the bunch-by-bunch THz detection systems (THz power) and the horizontal bunch size measurement setup (energy spread), three important properties of the bunch during this instability can be measured at every turn for long time scales. This allows a deep insight into the dynamics of the bunch under the influence of the microbunching instability. This contribution will discuss effects like the connection between the emitted CSR power and the deformations in the longitudinal bunch profile on the time scale of the instability. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS015 | |
About • | paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPTS016 | Longitudinal Beam Manipulation by RF Phase Modulation at the Karlsruhe Research Accelerator | 3123 |
|
||
At the storage ring KARA (Karlsruhe Research Accelerator) of the Karlsruhe Institute of Technology (KIT) we have installed a function for the RF phase modulation to the low-level RF system. By choosing proper conditions of the modulation, the electron distribution on the longitudinal phase space can be changed in a large range. There are several applications of this longitudinal manipulation to the accelerator operation: an improvement of the beam lifetime and suppression of collective instabilities. We have performed tracking simulations for the longitudinal beam manipulation by the RF phase modulation. The results have implied that the longitudinal phase space distribution strongly depends on the modulation frequency. We have also performed experiments, which aimed at improving the beam lifetime in 2.5 GeV KARA multi-bunch operations. In this contribution, the low-level RF system at KARA, the simulation and experimental results under the RF phase modulation will be presented. As one of the options of the modulation, we consider manipulation of the internal fine structure in the longitudinal phase space by the modulation. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS016 | |
About • | paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |