Author: Iwata, Y.
Paper Title Page
MOPRB017 Development of Inter-Digital H-Mode Drift-Tube Linac Prototype with Alternative Phase Focusing for a Muon Linac in the J-PARC Muon G-2/EDM Experiment 606
SUSPFO041   use link to see paper's listing under its alternate paper code  
 
  • Y. Nakazawa, H. Iinuma
    Ibaraki University, Ibaraki, Japan
  • K. Hasegawa, Y. Kondo, T. Morishita
    JAEA/J-PARC, Tokai-mura, Japan
  • N. Hayashizaki
    RLNR, Tokyo, Japan
  • Y. Iwashita
    Kyoto ICR, Uji, Kyoto, Japan
  • Y. Iwata
    NIRS, Chiba-shi, Japan
  • N. Kawamura, T. Mibe, M. Otani, T. Yamazaki, M. Yoshida
    KEK, Ibaraki, Japan
  • R. Kitamura, H.Y. Yasuda
    University of Tokyo, Tokyo, Japan
  • N. Saito
    J-PARC, KEK & JAEA, Ibaraki-ken, Japan
  • Y. Sue
    Nagoya University, Graduate School of Science, Chikusa-ku, Nagoya, Japan
  
  Funding: This work is supported by JSPS KAKENHI Grant Numbers JP15H03666, JP18H03707, JP16H03987, and JP16J07784.
An inter-digital H-mode drift-tube linac (IH-DTL) is developed in a muon linac at the J-PARC E34 experiment. IH-DTL will accelerate muons from 0.34 MeV to 4.5 MeV at a drive frequency of 324 MHz. Since IH-DTL adopts an APF method, with which the beam is focused in the transverse direction using the RF field only, the proper beam matching of the phase-space distribution is required before the injection into the IH-DTL. Thus, an IH-DTL prototype was fabricated to evaluate the performance of the cavity and beam transmission. As a preparation of the high-power test, a test coupler is designed and fabricated. In this paper, the development of the coupler and the result of the low-power measurement will be presented. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB017  
About • paper received ※ 29 April 2019       paper accepted ※ 18 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMP014 2D TRACKING CODE FOR DRIFT TUBE LINAC 3482
 
  • A. Yamaguchi, K. Nakayama, K. Okaya, K. Sato
    Toshiba, Yokohama, Japan
  • N. Hayashizaki
    RLNR, Tokyo, Japan
  • Y. Iwata, S. Yamada
    NIRS, Chiba-shi, Japan
  • T. Takeuchi
    Toshiba Energy Systems & Solutions Corporation, Keihin Product Operations, Yokohama, Japan
  
  A 2D tracking code has been developed for Alternating-Phase-Focusing drift tube linacs (APF-DTL). This code can design DTLs with a 2D electric field simulation and particle tracking by approximate equations. In this paper, we describe an outline of the 2D tracking code and a comparison of 2D tracking results and 3D simulation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP014  
About • paper received ※ 15 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)