IPAC2019 - List of Authors (Hu, K.H.)

Paper	Title	Page
TUPGW071	Optimization and Measurements on the Double Mini-Betay Lattice in the TPS Storage Ring	1567
	M.-S. Chiu, B.Y. Chen, C.H. Chen, J.Y. Chen, Y.-S. Cheng, P.C. Chiu, P.J. Chou, T.W. Hsu, K.H. Hu, J.C. Huang, P.Y. Huang, C.-C. Kuo, T.Y. Lee, C.Y. Liao, W.Y. Lin, Y.-C. Liu, H.-J. Tsai, F.H. Tseng NSRRC, Hsinchu, Taiwan
	The Taiwan Photon Source (TPS) is capable of operat-ing in multi-bunch and single-bunch mode. To operate in a hybrid mode as requested by users, we developed a lattice with chromaticities of 0.8/2 (x/y) to provide higher single bunch currents. Beam dynamics simulations and lattice characterizations including dynamic aperture, frequency map analysis, tune shift with energy, tune shift with amplitude, and betatron coupling will be discussed in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW071
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB081	Beam Motion and Photon Flux Dips during Injection at the Taiwan Photon Source	1848
	C.H. Huang, H.-P. Chang, C.H. Chen, Y.-S. Cheng, P.C. Chiu, C.-S. Fann, K.T. Hsu, K.H. Hu, C.Y. Liao, Y.-C. Liu, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The Taiwan photon source (TPS) is a 3 GeV synchrotron light source now in routine operation at the NSRRC. At the beginning of beam commissioning, significant photon flux dips could be observed at injection due to a blow-up of the beam size. To eliminate this transient effect, all four kickers were rematched. The leakage field was shielded and the induced current loops at vacuum chambers in the injection area were also eliminated. These efforts reduced the horizontal betatron oscillations and orbit distortions to around one-tenth. In order to decrease the recovery time of photon dips during injection, the operational chromaticity was reduced to improve incoherent effects. After all those improvements, the photon flux dips during injection dropped to 30 % and the recovery time to less than 1 msec.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB081
About •	paper received ※ 17 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB092	Reduction of Beam Induced RF-Heating in the Horizontal Stripline Kicker at the TPS	4035
	P.J. Chou, C.K. Chan, C.-C. Chang, K.T. Hsu, K.H. Hu, C.K. Kuan, I.C. Sheng NSRRC, Hsinchu, Taiwan
	In preparation for 500 mA operation at the Taiwan Pho-ton Source (TPS), we redesigned the horizontal stripline kicker for the beam feedback system to gain a smaller loss factor with higher shunt impedance. We introduced ground fenders (see Fig. 1) to this new design which resulted in the reduction of the loss factor and substantial increase of the kicker shunt impedance. The transverse profile of the kicker electrodes was matched to the race-track beam pipe in the straight sections to minimize broadband impedance. The ground fenders can reduce the leakage of image currents through the gaps between the two strip line electrodes and also help to achieve a better impedance matching for the TEM modes in the transmission lines formed by the stripline electrodes and beam pipe in the kicker. The RF design and analysis of trapped resonant modes in the kicker were simulated by the 3-D electromagnetic code GdfidL [1]. Results of the RF design and analysis of trapped resonant modes will be discussed together with analytical estimates of coupled bunch instabilities at a beam current of 500 mA.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB092
About •	paper received ※ 17 April 2019 paper accepted ※ 19 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS070	Diagnostic Tool For CompactPCI Crates	4275
	H.Z. Chen, C.H. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu NSRRC, Hsinchu, Taiwan
	On the control system hardware platform for the Taiwan Photon Source (TPS) more than half use CompactPCI crates. If a crate malfunctions, the internal crate card will not operate properly affecting accelerator operation. If the crate, however, could provide instant remote operational information, an opportunity exists to maintain or replace it in advance. Therefore, a diagnostic tool was developed to analyse and diagnose the condition of the crates. When abnormal operations occur, an alarm can be issued for early inspection and maintenance. This way it is possible to prevent the EPICS IOC from crashing by CompactPCI crates, which improves the reliability of accelerator operation. A detailed system architecture, implementation and progress will be discussed in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS070
About •	paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optimization and Measurements on the Double Mini-Betay Lattice in the TPS Storage Ring

1567

M.-S. Chiu, B.Y. Chen, C.H. Chen, J.Y. Chen, Y.-S. Cheng, P.C. Chiu, P.J. Chou, T.W. Hsu, K.H. Hu, J.C. Huang, P.Y. Huang, C.-C. Kuo, T.Y. Lee, C.Y. Liao, W.Y. Lin, Y.-C. Liu, H.-J. Tsai, F.H. Tseng
NSRRC, Hsinchu, Taiwan

The Taiwan Photon Source (TPS) is capable of operat-ing in multi-bunch and single-bunch mode. To operate in a hybrid mode as requested by users, we developed a lattice with chromaticities of 0.8/2 (x/y) to provide higher single bunch currents. Beam dynamics simulations and lattice characterizations including dynamic aperture, frequency map analysis, tune shift with energy, tune shift with amplitude, and betatron coupling will be discussed in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW071

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB081

Beam Motion and Photon Flux Dips during Injection at the Taiwan Photon Source

1848

C.H. Huang, H.-P. Chang, C.H. Chen, Y.-S. Cheng, P.C. Chiu, C.-S. Fann, K.T. Hsu, K.H. Hu, C.Y. Liao, Y.-C. Liu, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The Taiwan photon source (TPS) is a 3 GeV synchrotron light source now in routine operation at the NSRRC. At the beginning of beam commissioning, significant photon flux dips could be observed at injection due to a blow-up of the beam size. To eliminate this transient effect, all four kickers were rematched. The leakage field was shielded and the induced current loops at vacuum chambers in the injection area were also eliminated. These efforts reduced the horizontal betatron oscillations and orbit distortions to around one-tenth. In order to decrease the recovery time of photon dips during injection, the operational chromaticity was reduced to improve incoherent effects. After all those improvements, the photon flux dips during injection dropped to 30 % and the recovery time to less than 1 msec.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB081

About •

paper received ※ 17 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB092

Reduction of Beam Induced RF-Heating in the Horizontal Stripline Kicker at the TPS

4035

P.J. Chou, C.K. Chan, C.-C. Chang, K.T. Hsu, K.H. Hu, C.K. Kuan, I.C. Sheng
NSRRC, Hsinchu, Taiwan

In preparation for 500 mA operation at the Taiwan Pho-ton Source (TPS), we redesigned the horizontal stripline kicker for the beam feedback system to gain a smaller loss factor with higher shunt impedance. We introduced ground fenders (see Fig. 1) to this new design which resulted in the reduction of the loss factor and substantial increase of the kicker shunt impedance. The transverse profile of the kicker electrodes was matched to the race-track beam pipe in the straight sections to minimize broadband impedance. The ground fenders can reduce the leakage of image currents through the gaps between the two strip line electrodes and also help to achieve a better impedance matching for the TEM modes in the transmission lines formed by the stripline electrodes and beam pipe in the kicker. The RF design and analysis of trapped resonant modes in the kicker were simulated by the 3-D electromagnetic code GdfidL [1]. Results of the RF design and analysis of trapped resonant modes will be discussed together with analytical estimates of coupled bunch instabilities at a beam current of 500 mA.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB092

About •

paper received ※ 17 April 2019 paper accepted ※ 19 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS070

Diagnostic Tool For CompactPCI Crates

4275

H.Z. Chen, C.H. Chen, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu
NSRRC, Hsinchu, Taiwan

On the control system hardware platform for the Taiwan Photon Source (TPS) more than half use CompactPCI crates. If a crate malfunctions, the internal crate card will not operate properly affecting accelerator operation. If the crate, however, could provide instant remote operational information, an opportunity exists to maintain or replace it in advance. Therefore, a diagnostic tool was developed to analyse and diagnose the condition of the crates. When abnormal operations occur, an alarm can be issued for early inspection and maintenance. This way it is possible to prevent the EPICS IOC from crashing by CompactPCI crates, which improves the reliability of accelerator operation. A detailed system architecture, implementation and progress will be discussed in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS070

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)