IPAC2019 - List of Authors (He, X.)

Paper	Title	Page
MOPTS067	The Progress in Physics Design of HEPS LINAC	1008
	C. Meng, D.Y. He, X. He, J.Y. Li, Y.M. Peng, S.C. Wang, O. Xiao, J.R. Zhang, S.P. Zhang IHEP, Beijing, People’s Republic of China
	The High Energy Photon Source (HEPS) is a 6-GeV, ultralow-emittance light source to be built in China. The injector is composed of a 500-MeV Linac and a full energy booster. According to the study and com-missioning consideration of on-axis swap-out injec-tion system, a high bunch charge injector is desirable and a Linac that can provide 7nC per bunch electron beam to booster is needed. This paper present different bunching system schemes and the performance of different schemes are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS067
About •	paper received ※ 14 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB045	Suppression of Secondary Electron Yield Effect in the 650MHz/800kW Klystron for CEPC	2906
	X. He, C. Meng, S. Pei, J.L. Wang, O. Xiao, N. Zhou IHEP, Beijing, People’s Republic of China
	The circular electron positron collider (CEPC) is in pre-research, it will need more than two hundred 650MHz/800kW klystrons. The secondary electron yield (SEY) effect suppression is very important for the klystron working stable. The simulation uses an incident primary electron source and considers all the phases and power levels of the input microwave. Two methods are simulated for the SEY suppression. The groove cutting on the nose of cavities is much simple while the TiN coating can suppress better. The effect after groove cutting on nose is also simulated and the corresponding compensations are adopted. For simplify the fabrication progress as well as some experience that can be referenced, the groove cutting method is adopted finally for the first klystron prototype, which is expected to be available in the summer of 2019.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB045
About •	paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB046	Development of Flexible Waveguide for High Power High Vacuum Applications in S-band	2909
	X. He, B. Deng, J. Lei, C. Meng, S. Pei IHEP, Beijing, People’s Republic of China
	A novel flexible waveguide is developed for S band 2856 MHz, which is a standard WR284 waveguide. The surface of the flexible waveguide is plated with Oxygen-free High Conductivity (OFHC) copper for the purpose of welding with the stainless steel flange in the vacuum furnace, for the flexible waveguide itself is made of brass. The prototype has got a certain amount of deformation which will be much more convenient for the connection between two hard waveguides. It also has a good measurement results of the lower power microwave test, and the 72 hours vacuum leakage test shows a satisfactory vacuum performance, no obvious surface collapse is observed. The high power test will be conducted after our high power test facility is available, which will tell us the maximal power level of the flexible waveguide prototype.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB046
About •	paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Progress in Physics Design of HEPS LINAC

1008

C. Meng, D.Y. He, X. He, J.Y. Li, Y.M. Peng, S.C. Wang, O. Xiao, J.R. Zhang, S.P. Zhang
IHEP, Beijing, People’s Republic of China

The High Energy Photon Source (HEPS) is a 6-GeV, ultralow-emittance light source to be built in China. The injector is composed of a 500-MeV Linac and a full energy booster. According to the study and com-missioning consideration of on-axis swap-out injec-tion system, a high bunch charge injector is desirable and a Linac that can provide 7nC per bunch electron beam to booster is needed. This paper present different bunching system schemes and the performance of different schemes are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS067

About •

paper received ※ 14 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB045

Suppression of Secondary Electron Yield Effect in the 650MHz/800kW Klystron for CEPC

2906

X. He, C. Meng, S. Pei, J.L. Wang, O. Xiao, N. Zhou
IHEP, Beijing, People’s Republic of China

The circular electron positron collider (CEPC) is in pre-research, it will need more than two hundred 650MHz/800kW klystrons. The secondary electron yield (SEY) effect suppression is very important for the klystron working stable. The simulation uses an incident primary electron source and considers all the phases and power levels of the input microwave. Two methods are simulated for the SEY suppression. The groove cutting on the nose of cavities is much simple while the TiN coating can suppress better. The effect after groove cutting on nose is also simulated and the corresponding compensations are adopted. For simplify the fabrication progress as well as some experience that can be referenced, the groove cutting method is adopted finally for the first klystron prototype, which is expected to be available in the summer of 2019.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB045

About •

paper received ※ 13 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB046

Development of Flexible Waveguide for High Power High Vacuum Applications in S-band

2909

X. He, B. Deng, J. Lei, C. Meng, S. Pei
IHEP, Beijing, People’s Republic of China

A novel flexible waveguide is developed for S band 2856 MHz, which is a standard WR284 waveguide. The surface of the flexible waveguide is plated with Oxygen-free High Conductivity (OFHC) copper for the purpose of welding with the stainless steel flange in the vacuum furnace, for the flexible waveguide itself is made of brass. The prototype has got a certain amount of deformation which will be much more convenient for the connection between two hard waveguides. It also has a good measurement results of the lower power microwave test, and the 72 hours vacuum leakage test shows a satisfactory vacuum performance, no obvious surface collapse is observed. The high power test will be conducted after our high power test facility is available, which will tell us the maximal power level of the flexible waveguide prototype.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB046

About •

paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)