IPAC2019 - List of Authors (De Monte, R.)

Paper	Title	Page
MOPTS043	ESS Related Activities at Elettra Sincrotrone Trieste	953
	A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW071	Evaluation of a New 500 MHz Digitizer at Elettra and Fermi	2635
	P. Leban, M. Žnidarčič I-Tech, Solkan, Slovenia S. Bassanese, G. Brajnik, R. De Monte Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	A new digitizer was evaluated in ELETTRA storage ring and FERMI linear accelerator. The A/D conversion is done with 14-bits at 500 MS/s. The sampling clock is hard-locked to the Master Oscillator and has a jitter of a maximum 10 ps. The AC coupled version has an analog bandwidth up to 2 GHz and was used to measure the fill pattern. The bunch flat-top is very narrow (10^-15 ps). To reach better stability, various external filtering components were used. Bunch-by-bunch beam position was calculated offline and compared to a standard BPM electronics. The DC coupled version was used to sample pulses from the fast current transformer at FERMI. A software interface can configure data acquisition length and fill buffer segments with pre-defined number of triggers. Native TANGO and EPICS interfaces allow for fast integration with CSS and other display tools.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW071
About •	paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW072	Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste	2638
	P. Leban, M. Žnidarčič I-Tech, Solkan, Slovenia G. Brajnik, R. De Monte Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Stable and reliable beam position measurement is of paramount importance for the present and future light sources. Stabilization with a pilot-tone technique was developed by Elettra Sincrotrone Trieste and supported in the commercial BPM electronics Libera Spark. Both system components (the pilot-tone front-end and BPM electronics) are controlled through a common software interface which is compatible with TANGO, EPICS and LabVIEW/MATLAB clients. The system provides a reliable self-diagnostics, cable and button diagnostics and drift compensation. This paper presents results from beam measurements under different environmental and beam conditions.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW072
About •	paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ESS Related Activities at Elettra Sincrotrone Trieste

953

A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW071

Evaluation of a New 500 MHz Digitizer at Elettra and Fermi

2635

P. Leban, M. Žnidarčič
I-Tech, Solkan, Slovenia
S. Bassanese, G. Brajnik, R. De Monte
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

A new digitizer was evaluated in ELETTRA storage ring and FERMI linear accelerator. The A/D conversion is done with 14-bits at 500 MS/s. The sampling clock is hard-locked to the Master Oscillator and has a jitter of a maximum 10 ps. The AC coupled version has an analog bandwidth up to 2 GHz and was used to measure the fill pattern. The bunch flat-top is very narrow (10^-15 ps). To reach better stability, various external filtering components were used. Bunch-by-bunch beam position was calculated offline and compared to a standard BPM electronics. The DC coupled version was used to sample pulses from the fast current transformer at FERMI. A software interface can configure data acquisition length and fill buffer segments with pre-defined number of triggers. Native TANGO and EPICS interfaces allow for fast integration with CSS and other display tools.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW071

About •

paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW072

Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste

2638

P. Leban, M. Žnidarčič
I-Tech, Solkan, Slovenia
G. Brajnik, R. De Monte
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Stable and reliable beam position measurement is of paramount importance for the present and future light sources. Stabilization with a pilot-tone technique was developed by Elettra Sincrotrone Trieste and supported in the commercial BPM electronics Libera Spark. Both system components (the pilot-tone front-end and BPM electronics) are controlled through a common software interface which is compatible with TANGO, EPICS and LabVIEW/MATLAB clients. The system provides a reliable self-diagnostics, cable and button diagnostics and drift compensation. This paper presents results from beam measurements under different environmental and beam conditions.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW072

About •

paper received ※ 13 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)