IPAC2019 - List of Authors (Celona, L.)

Paper	Title	Page
MOPTS103	First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport	1118
	R. Miyamoto, R.E. Bebb, E.C. Bergman, B. Bertrand, H. Danared, C.S. Derrez, E.M. Donegani, M. Eshraqi, J.F. Esteban Müller, T. Fay, V. Grishin, B. Gålnander, S. Haghtalab, H. Hassanzadegan, A. Jansson, H. Kocevar, E. Laface, Y. Levinsen, M. Mansouri, C.A. Martins, J.P.S. Martins, N. Milas, M. Muñoz, E. Nilsson, D.C. Plostinar, C. Rosati, T.J. Shea, A.G. Sosa, R. Tarkeshian, L. Tchelidze, C.A. Thomas, P.L. van Velze ESS, Lund, Sweden I. Bergstrom CERN, Meyrin, Switzerland L. Celona, L. Neri INFN/LNS, Catania, Italy
	The European Spallation Source (ESS), currently under construction in Lund, Sweden, will be a spallation neutron source driven by a proton linac of an unprecedented 5 MW beam power. Such a high power requires its ion source (IS) to produce proton beam pulses at 14 Hz with a high peak current more than 62.5 mA and a long plateau up to §I{3}{ms}. The IS and the following low energy beam transport (LEBT) section were manufactured and tested with beam to meet ESS requirements at INFN-LNS and delivered to ESS towards the end of 2017. Beam commissioning of these two sections on the ESS site has started in September 2018 and will continue until the end of June 2019. This paper provides an overview on this first beam commissioning period at ESS and also presents results of IS characterization and testing on LEBT functionalities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS103
About •	paper received ※ 20 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB024	Low Power RF Test of a Quadrupole-free X-Band Mode Launcher for High Brightness Applications	2856
	G. Torrisi, L. Celona, S. Gammino, O. Leonardi, G. Sorbello INFN/LNS, Catania, Italy G. Castorina Sapienza University of Rome, Rome, Italy V.A. Dolgashev SLAC, Menlo Park, California, USA L. Faillace INFN-Milano, Milano, Italy G.S. Mauro INFN/LNL, Legnaro (PD), Italy G. Sorbello University of Catania, Catania, Italy B. Spataro INFN/LNF, Frascati, Italy
	In this work we present the low power RF characterization of a novel TM01 X-band mode launcher for the new generation of high brightness RF photo-injectors. The proposed mode launcher exploits a fourfold symmetry which minimizes both the dipole and the quadrupole fields in order to mitigate the emittance growth in the early stages of the acceleration process. Two identical aluminum mode launchers have been assembled and measured in back-to-back configurations for three different central waveguide lengths. From the back-to-back results we infer the performance of each mode launcher. The low power RF test, performed at the Istituto Nazionale di Fisica Nucleare Laboratori Nazionali del Sud (INFN-LNS), validate both the numerical simulations and the quality of fabrication. An oxygen-free high-conductivity copper version of the device is being manufactured for high power and ultra high vacuum tests that are planned to be conducted at SLAC
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB024
About •	paper received ※ 09 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW033	Numerical Study of Photonic-Crystal-Based Dielectric Accelerators	3653
	G. Torrisi, L. Celona, S. Gammino, D. Mascali, G. Sorbello INFN/LNS, Catania, Italy C. De Angelis, A. Locatelli University of Brescia, Brescia, Italy G.S. Mauro INFN/LNL, Legnaro (PD), Italy G. Sorbello University of Catania, Catania, Italy
	All-dielectric electromagnetic band gap (EBG) waveguides structures promise significant improvement of accelerating gradient of laser-driven acceleration with the potential to miniaturize the accelerator itself. In this work we study photonic crystal structures designed for acceleration of relativistic electrons. We explore the performance of the all-dielectric EBG accelerating waveguide structures thanks to full wave electromagnetic simulations of couplers and accelerating waveguides. The characteristic interaction impedance, accelerating gradient and all the key parameters that are typically used to characterize linear accelerators are evaluated and used to compare the properties of the accelerating mode field distribution in different geometries.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW033
About •	paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport

1118

R. Miyamoto, R.E. Bebb, E.C. Bergman, B. Bertrand, H. Danared, C.S. Derrez, E.M. Donegani, M. Eshraqi, J.F. Esteban Müller, T. Fay, V. Grishin, B. Gålnander, S. Haghtalab, H. Hassanzadegan, A. Jansson, H. Kocevar, E. Laface, Y. Levinsen, M. Mansouri, C.A. Martins, J.P.S. Martins, N. Milas, M. Muñoz, E. Nilsson, D.C. Plostinar, C. Rosati, T.J. Shea, A.G. Sosa, R. Tarkeshian, L. Tchelidze, C.A. Thomas, P.L. van Velze
ESS, Lund, Sweden
I. Bergstrom
CERN, Meyrin, Switzerland
L. Celona, L. Neri
INFN/LNS, Catania, Italy

The European Spallation Source (ESS), currently under construction in Lund, Sweden, will be a spallation neutron source driven by a proton linac of an unprecedented 5 MW beam power. Such a high power requires its ion source (IS) to produce proton beam pulses at 14 Hz with a high peak current more than 62.5 mA and a long plateau up to §I{3}{ms}. The IS and the following low energy beam transport (LEBT) section were manufactured and tested with beam to meet ESS requirements at INFN-LNS and delivered to ESS towards the end of 2017. Beam commissioning of these two sections on the ESS site has started in September 2018 and will continue until the end of June 2019. This paper provides an overview on this first beam commissioning period at ESS and also presents results of IS characterization and testing on LEBT functionalities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS103

About •

paper received ※ 20 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB024

Low Power RF Test of a Quadrupole-free X-Band Mode Launcher for High Brightness Applications

2856

G. Torrisi, L. Celona, S. Gammino, O. Leonardi, G. Sorbello
INFN/LNS, Catania, Italy
G. Castorina
Sapienza University of Rome, Rome, Italy
V.A. Dolgashev
SLAC, Menlo Park, California, USA
L. Faillace
INFN-Milano, Milano, Italy
G.S. Mauro
INFN/LNL, Legnaro (PD), Italy
G. Sorbello
University of Catania, Catania, Italy
B. Spataro
INFN/LNF, Frascati, Italy

In this work we present the low power RF characterization of a novel TM01 X-band mode launcher for the new generation of high brightness RF photo-injectors. The proposed mode launcher exploits a fourfold symmetry which minimizes both the dipole and the quadrupole fields in order to mitigate the emittance growth in the early stages of the acceleration process. Two identical aluminum mode launchers have been assembled and measured in back-to-back configurations for three different central waveguide lengths. From the back-to-back results we infer the performance of each mode launcher. The low power RF test, performed at the Istituto Nazionale di Fisica Nucleare Laboratori Nazionali del Sud (INFN-LNS), validate both the numerical simulations and the quality of fabrication. An oxygen-free high-conductivity copper version of the device is being manufactured for high power and ultra high vacuum tests that are planned to be conducted at SLAC

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB024

About •

paper received ※ 09 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPGW033

Numerical Study of Photonic-Crystal-Based Dielectric Accelerators

3653

G. Torrisi, L. Celona, S. Gammino, D. Mascali, G. Sorbello
INFN/LNS, Catania, Italy
C. De Angelis, A. Locatelli
University of Brescia, Brescia, Italy
G.S. Mauro
INFN/LNL, Legnaro (PD), Italy
G. Sorbello
University of Catania, Catania, Italy

All-dielectric electromagnetic band gap (EBG) waveguides structures promise significant improvement of accelerating gradient of laser-driven acceleration with the potential to miniaturize the accelerator itself. In this work we study photonic crystal structures designed for acceleration of relativistic electrons. We explore the performance of the all-dielectric EBG accelerating waveguide structures thanks to full wave electromagnetic simulations of couplers and accelerating waveguides. The characteristic interaction impedance, accelerating gradient and all the key parameters that are typically used to characterize linear accelerators are evaluated and used to compare the properties of the accelerating mode field distribution in different geometries.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW033

About •

paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)