IPAC2019 - List of Authors (Celeste, D.)

Paper	Title	Page
WEPGW078	Development and Test of a Beam Imaging System Based on Radiation Tolerant Optical Fiber Bundles	2658
	D. Celeste, E. Bravin, S. Burger, F. Roncarolo CERN, Geneva, Switzerland
	Many of the beam image systems at CERN are located in high radiation environments. In order to cope with this issue, VIDICON cameras are presently used but their production has been nowadays discontinued worldwide. The development of an alternative beam imaging system is described here, based on radiation tolerant optical fibre bundles. Such an optical line relays the image of a scintillating screen to a standard CMOS camera, located away from the high radiation zone. A prototype system based on a 10m long bundle with 10⁴ fibres has been tested in the TT2 transfer line at CERN. The light transmission is rather low, but is compensated by the sensitivity of the CMOS camera. The system had a field of view of 60 mm and a spatial resolution of ~1 mm. The radiation hardness of such a fiber bundle was tested at the IRMA-CEA facility in Saclay, France. The bundle was irradiated at a rate of 3.6 kGy/h for 8 consecutive day. The total integrated dose achieved was ~700 kGy, which corresponds to about ten years of operation at the beam imaging station with the highest radiation dose at CERN. While the light transmission was reduced by 50%, this is still adequate to provide acceptable images.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW078
About •	paper received ※ 10 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development and Test of a Beam Imaging System Based on Radiation Tolerant Optical Fiber Bundles

2658

D. Celeste, E. Bravin, S. Burger, F. Roncarolo
CERN, Geneva, Switzerland

Many of the beam image systems at CERN are located in high radiation environments. In order to cope with this issue, VIDICON cameras are presently used but their production has been nowadays discontinued worldwide. The development of an alternative beam imaging system is described here, based on radiation tolerant optical fibre bundles. Such an optical line relays the image of a scintillating screen to a standard CMOS camera, located away from the high radiation zone. A prototype system based on a 10m long bundle with 10⁴ fibres has been tested in the TT2 transfer line at CERN. The light transmission is rather low, but is compensated by the sensitivity of the CMOS camera. The system had a field of view of 60 mm and a spatial resolution of ~1 mm. The radiation hardness of such a fiber bundle was tested at the IRMA-CEA facility in Saclay, France. The bundle was irradiated at a rate of 3.6 kGy/h for 8 consecutive day. The total integrated dose achieved was ~700 kGy, which corresponds to about ten years of operation at the beam imaging station with the highest radiation dose at CERN. While the light transmission was reduced by 50%, this is still adequate to provide acceptable images.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW078

About •

paper received ※ 10 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)