Author: Cattenoz, G.
Paper Title Page
MOPTS093 Ultra-High Vacuum Characterization of Molybdenum-Carbide Graphite for HL-LHC Collimators 1078
 
  • F. Carra, C. Accettura, A. Bertarelli, G. Bregliozzi, G. Cattenoz, S. Redaelli, M. Taborelli
    CERN, Meyrin, Switzerland
  • M. Beghi
    POLIMI, Milano, Italy
  • J. Guardia Valenzuela
    Universidad de Zaragoza, Zaragoza, Spain
  
  Funding: This work has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No. 730871. Research supported by the HL-LHC project
In view of the High-Luminosity upgrade of the Large Hadron Collider (LHC) collimation system, a family of novel molybdenum-carbide graphite (MoGr) composites was developed to meet the challenging requirements of HL-LHC beam-halo collimation, in particular the electrical conductivity and thermo-mechanical performances. The Ultra-High Vacuum (UHV) behaviour of this material was extensively characterized to assess its compatibility with the accelerator’s specifications. The results presented in this paper correlate the outgassing behaviour with the microscopic features of MoGr compared to other graphite-based materials. Residual gas analysis (RGA) was exploited to optimize post-production treatments. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS093  
About • paper received ※ 12 April 2019       paper accepted ※ 21 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEYYPLM3 First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC 2262
 
  • G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos
    CERN, Geneva, Switzerland
  • D. Amorim
    Grenoble-INP Phelma, Grenoble, France
  • M. Fitterer, A. Valishev
    Fermilab, Batavia, Illinois, USA
  • D. Kaltchev
    TRIUMF, Vancouver, Canada
  • S. Kostoglou
    National Technical University of Athens, Zografou, Greece
  • A.E. Levichev
    BINP SB RAS, Novosibirsk, Russia
  • A. Poyet
    Université Grenoble Alpes, Grenoble, France
  
  The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.  
slides icon Slides WEYYPLM3 [6.371 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3  
About • paper received ※ 06 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)