IPAC2019 - List of Authors (Castronovo, D.)

Paper	Title	Page
MOPTS043	ESS Related Activities at Elettra Sincrotrone Trieste	953
	A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043
About •	paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB031	FERMI Configuration for the Echo Enabled Harmonic Generation Experiment	1752
	E. Allaria, D. Castronovo, M. Cautero, I. Cudin, M.B. Danailov, B. Diviacco, L. Giannessi, M. Veronese, M. Zangrando Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	The FERMI FEL-2 undulator line, normally operated in the double stage high gain harmonic generation with the fresh bunch (HGHG-FB) has been temporary modified to allow operating the FEL in the Echo Enabled Harmonic Generation (EEHG) scheme. An increase of the dispersion in the delay-line was required together with a replacement of the second stage modulator allowing the electron beam to resonantly interact with a second seed laser. Another critical component of the EEHG setup is a new manipulator installed in the delay-line chicane and hosting additional diagnostic components. In this work we describe in some detail these new components that allowed a successful demonstration of the EEHG at harmonics as high as 101.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB031
About •	paper received ※ 17 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS020	ESS Magnets at Elettra Sincrotrone Trieste	4148
	D. Castronovo, D. Caiazza, A. Fabris, R. Fabris, A. Gubertini, G. Loda Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions committed to the realization of the Italian in-kind contributions for the European Spallation Source. One of these consists in the supply of several conventional iron dominated electro-magnets to be installed in the superconducting part of the linac and in the transfer lines. The total number of magnets amounts to 2 dipoles, 139 quadrupoles, of four different families, and 72 correctors, of three different types. This document reports all related magnetic design and optimisations carried out to meet the required specifications and on the status of production and testing.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS020
About •	paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS021	Magnets for Elettra 2.0	4152
	D. Castronovo, E. Karantzoulis Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	After 25 years of faithfully serving the user community with excellent results, Elettra need a major upgrade with a new compact latice that will replace the existing double bend achromat for the reducing of the horizontal emittance and the increasing of the brilliance and coherence of the X-ray beam. This paper report the magnetic design development and optimisations carried out in order to satisfy the layout feasibility and the magnet strengths.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS021
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ESS Related Activities at Elettra Sincrotrone Trieste

953

A. Fabris, D. Caiazza, D. Castronovo, M. Cautero, S. Cleva, R. De Monte, R. Fabris, M. Ferianis, A. Gubertini, T.N. Gucin, R. Laghi, G. Loda, C. Pasotti, R. Visintini, S. Grulja
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS043

About •

paper received ※ 13 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB031

FERMI Configuration for the Echo Enabled Harmonic Generation Experiment

1752

E. Allaria, D. Castronovo, M. Cautero, I. Cudin, M.B. Danailov, B. Diviacco, L. Giannessi, M. Veronese, M. Zangrando
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

The FERMI FEL-2 undulator line, normally operated in the double stage high gain harmonic generation with the fresh bunch (HGHG-FB) has been temporary modified to allow operating the FEL in the Echo Enabled Harmonic Generation (EEHG) scheme. An increase of the dispersion in the delay-line was required together with a replacement of the second stage modulator allowing the electron beam to resonantly interact with a second seed laser. Another critical component of the EEHG setup is a new manipulator installed in the delay-line chicane and hosting additional diagnostic components. In this work we describe in some detail these new components that allowed a successful demonstration of the EEHG at harmonics as high as 101.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB031

About •

paper received ※ 17 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS020

ESS Magnets at Elettra Sincrotrone Trieste

4148

D. Castronovo, D. Caiazza, A. Fabris, R. Fabris, A. Gubertini, G. Loda
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions committed to the realization of the Italian in-kind contributions for the European Spallation Source. One of these consists in the supply of several conventional iron dominated electro-magnets to be installed in the superconducting part of the linac and in the transfer lines. The total number of magnets amounts to 2 dipoles, 139 quadrupoles, of four different families, and 72 correctors, of three different types. This document reports all related magnetic design and optimisations carried out to meet the required specifications and on the status of production and testing.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS020

About •

paper received ※ 14 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTS021

Magnets for Elettra 2.0

4152

D. Castronovo, E. Karantzoulis
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

After 25 years of faithfully serving the user community with excellent results, Elettra need a major upgrade with a new compact latice that will replace the existing double bend achromat for the reducing of the horizontal emittance and the increasing of the brilliance and coherence of the X-ray beam. This paper report the magnetic design development and optimisations carried out in order to satisfy the layout feasibility and the magnet strengths.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPTS021

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)