IPAC2019 - List of Authors (Carlsten, B.E.)

Paper	Title	Page
MOPGW116	Validation of a Novel Method for the Calculation of Near-Field Synchrotron Radiation	397
	F.Y. Li, B.E. Carlsten, R. Garimella, C. Huang, T.J. Kwan LANL, Los Alamos, New Mexico, USA
	Funding: Work supported by the LDRD program at LANL. The phenomenon of synchrotron radiation (SR) from electrons is at the core of modern accelerator based light sources. While SR in the far field has been well characterized, the near-field SR and its impacts on self-consistent electron beam dynamics remain an ongoing topic. Since it is difficult to experimentally characterize the near fields, it is desirable to develop accurate and efficient numerical methods for the design of these light sources. Here, we investigate a novel method, originally proposed by Shintake and which potentially has both high efficiency and accuracy. We focus on the field calculation of this method and show that the original idea has missed the important terms of fields due to electron acceleration and therefore only applies to a linear motion. To correct this limitation we developed a modified algorithm that gives consistent fields with direct calculations using the Liénard-Wiechert equation. Some basic signatures of the near-field SR fields are also drawn for a cyclotron motion by using this modified approach.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW116
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS117	Exploration of High-Gradient Structures for 4th Generation Light Sources	1155
	S.J. Smith, S. Biedron, S.I. Sosa Guitron University of New Mexico, Albuquerque, USA T.B. Bolin Element Aero, Chicago, USA B.E. Carlsten, F.L. Krawczyk LANL, Los Alamos, New Mexico, USA J.R. Cary, D.M. Cheatham Tech-X, Boulder, Colorado, USA
	As the energy, scale and therefore the cost of large-scale accelerator projects, such as X-ray free-electron lasers (XFELs) increases, new technologies must be developed in order to minimize costs and maximize efficiency wherever possible. One obvious way to reduce costs is to reduce the length of accelerating sections by utilizing higher accelerating gradients. Here we present the results of a study into the various structure options for FEL linacs, contrasting different frequencies, geometries and operating modes. An investigation into the possibility of using cryo-cooled travelling wave (TW) electron structures which allow for higher gradient operation by exploiting the anomalous skin effect is also detailed. Finally, we give simulation results from a number of commercial codes including VSim 9, for a hypothetical TW high gradient C-band structure design employing cryo-cooled technology. Breakdown effects, pulsed heating, tolerances, efficiencies and potential rf sources are also explored, all within the framework of typical FELs and their requirements.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS117
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Validation of a Novel Method for the Calculation of Near-Field Synchrotron Radiation

397

F.Y. Li, B.E. Carlsten, R. Garimella, C. Huang, T.J. Kwan
LANL, Los Alamos, New Mexico, USA

Funding: Work supported by the LDRD program at LANL.
The phenomenon of synchrotron radiation (SR) from electrons is at the core of modern accelerator based light sources. While SR in the far field has been well characterized, the near-field SR and its impacts on self-consistent electron beam dynamics remain an ongoing topic. Since it is difficult to experimentally characterize the near fields, it is desirable to develop accurate and efficient numerical methods for the design of these light sources. Here, we investigate a novel method, originally proposed by Shintake and which potentially has both high efficiency and accuracy. We focus on the field calculation of this method and show that the original idea has missed the important terms of fields due to electron acceleration and therefore only applies to a linear motion. To correct this limitation we developed a modified algorithm that gives consistent fields with direct calculations using the Liénard-Wiechert equation. Some basic signatures of the near-field SR fields are also drawn for a cyclotron motion by using this modified approach.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW116

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS117

Exploration of High-Gradient Structures for 4th Generation Light Sources

1155

S.J. Smith, S. Biedron, S.I. Sosa Guitron
University of New Mexico, Albuquerque, USA
T.B. Bolin
Element Aero, Chicago, USA
B.E. Carlsten, F.L. Krawczyk
LANL, Los Alamos, New Mexico, USA
J.R. Cary, D.M. Cheatham
Tech-X, Boulder, Colorado, USA

As the energy, scale and therefore the cost of large-scale accelerator projects, such as X-ray free-electron lasers (XFELs) increases, new technologies must be developed in order to minimize costs and maximize efficiency wherever possible. One obvious way to reduce costs is to reduce the length of accelerating sections by utilizing higher accelerating gradients. Here we present the results of a study into the various structure options for FEL linacs, contrasting different frequencies, geometries and operating modes. An investigation into the possibility of using cryo-cooled travelling wave (TW) electron structures which allow for higher gradient operation by exploiting the anomalous skin effect is also detailed. Finally, we give simulation results from a number of commercial codes including VSim 9, for a hypothetical TW high gradient C-band structure design employing cryo-cooled technology. Breakdown effects, pulsed heating, tolerances, efficiencies and potential rf sources are also explored, all within the framework of typical FELs and their requirements.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS117

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)