IPAC2019 - List of Authors (Calviani, M.)

Paper	Title	Page
WEPMP028	Crystal for Slow Extraction Loss-Reduction of the SPS Electrostatic Septum	2379
	L.S. Esposito, P. Bestman, M.E.J. Butcher, M. Calviani, M. Di Castro, M. Donzé, M.A. Fraser, M. Garattini, Y. Gavrikov, S.S. Gilardoni, B. Goddard, V. Kain, J. Lendaro, A. Masi, M. Pari, J. Prieto, R. Rossi, W. Scandale, R. Seidenbinder, P. Serrano Galvez, L.S. Stoel, F.M. Velotti, V. Zhovkovska CERN, Meyrin, Switzerland F.M. Addesa, F. Iacoangeli INFN-Roma, Roma, Italy A.G. Afonin, Y.A. Chesnokov, A.A. Durum, V.A. Maisheev, Yu.E. Sandomirskiy, A.A. Yanovich IHEP, Moscow Region, Russia J.E. Borg, M. Garattini, G. Hall, T. James, M. Pesaresi Imperial College of Science and Technology, Department of Physics, London, United Kingdom A.S. Denisov, Y. Gavrikov, Yu.M. Ivanov, M.A. Koznov, L.G. Malyarenko, V. Skorobogatov PNPI, Gatchina, Leningrad District, Russia F. Galluccio INFN-Napoli, Napoli, Italy A.D. Kovalenko, A.M. Taratin JINR, Dubna, Moscow Region, Russia F. Murtas INFN/LNF, Frascati, Italy A. Natochii LAL, Orsay, France
	The use of a bent crystal was investigated in order to reduce the losses at the CERN Super Proton Synchrotron (SPS) electrostatic septa (ZS) during the slow extraction of 400 GeV protons toward the North Area. The crystal, installed a few meters upstream the ZS, bends protons that would otherwise impinge on the ZS wires. Since particle deflection with good efficiency is achieved only when the crystal lattice is aligned within ~10 urad to the trajectory of the particles (at p = 400 GeV/c), a compact goniometer was built to allow the correct angular alignment of the crystal with respect to the incoming beam with a precision of few urad. In this paper, we report on the crystal features measured during a dedicated beam test by the UA9 experimental installation in the CERN H8 beam line. Details of the goniometer and its installation are also reported. The first results achieved during dedicated Machine Development (MD) sessions are finally presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP028
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP040	Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers	2418
	C. Wiesner, W. Bartmann, C. Bracco, M. Calviani, E. Carlier, L. Ducimetière, M.I. Frankl, M.A. Fraser, S.S. Gilardoni, B. Goddard, V. Gomes Namora, T. Kramer, A. Lechner, N. Magnin, M. Meddahi, A. Perillo-Marcone, T. Polzin, L.C. Richtmann, V. Rizzoglio, V. Senaj, J.A.F. Somoza, D. Wollmann CERN, Meyrin, Switzerland
	The LHC Beam Dump System is required to safely dispose of the energy of the stored beam. In order to reduce the energy density deposited in the beam dump, a dedicated dilution system is installed. On July 14, 2018, during a regular beam dump at 6.5 TeV beam energy, a high-voltage flashover of two vertical dilution kickers was observed, leading to a voltage breakdown and reduced dilution in the vertical plane. It was the first incident of this type since the start of LHC beam operation. In this paper, the flashover event is described and the implications analysed. Circuit simulations of the current in the magnet coil as well as simulations of the resulting beam sweep pattern are presented and compared with the measurements. The criticality of the event is assessed and implications for future failure scenarios are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP040
About •	paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXXPLM2	Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction	3399
	F.M. Velotti, P. Bestmann, M.E.J. Butcher, M. Calviani, M. Di Castro, M. Donzé, L.S. Esposito, M.A. Fraser, M. Garattini, S.S. Gilardoni, B. Goddard, V. Kain, J. Lendaro, A. Masi, D. Mirarchi, M. Pari, J. Prieto, S. Redaelli, R. Rossi, W. Scandale, R. Seidenbinder, P. Serrano Galvez, L.S. Stoel, C. Zamantzas, V. Zhovkovska CERN, Meyrin, Switzerland F.M. Addesa, F. Iacoangeli INFN-Roma, Roma, Italy A.G. Afonin, Y.A. Chesnokov, A.A. Durum, V.A. Maisheev, Yu.E. Sandomirskiy, A.A. Yanovich IHEP, Moscow Region, Russia J.E. Borg, M. Garattini, G. Hall, T. James, M. Pesaresi Imperial College of Science and Technology, Department of Physics, London, United Kingdom A.S. Denisov, Y. Gavrikov, Yu.M. Ivanov, M.A. Koznov, L.G. Malyarenko, V. Skorobogatov PNPI, Gatchina, Leningrad District, Russia F. Galluccio INFN-Napoli, Napoli, Italy F. Murtas INFN/LNF, Frascati, Italy
	A proof-of-principle experiment demonstrating the feasibility of using a thin, bent crystal aligned upstream of an extraction septum (ES) to increase the efficiency of the third-integer resonant slow extraction process has been carried out at the CERN Super Proton Synchrotron (SPS). With the primary aim of reducing the beam loss and induced radio-activation of the SPS, the crystal was aligned to both the beam and the septum to reduce by up to 40% the beam intensity impinging the ES and increase the intensity entering the external transfer line. In this contribution, we introduce the concept and the prototype system that was installed in 2018 before reporting in detail on the dedicated program of machine development studies carried out to characterise its performance and demonstrate operational feasibility. The performance reach and compatibility with other loss reduction techniques proposed to further increase the extraction efficiency, such as phase space folding with octupoles, is discussed in view of future high intensity operation.
	Slides THXXPLM2 [1.397 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THXXPLM2
About •	paper received ※ 15 May 2019 paper accepted ※ 28 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Crystal for Slow Extraction Loss-Reduction of the SPS Electrostatic Septum

2379

L.S. Esposito, P. Bestman, M.E.J. Butcher, M. Calviani, M. Di Castro, M. Donzé, M.A. Fraser, M. Garattini, Y. Gavrikov, S.S. Gilardoni, B. Goddard, V. Kain, J. Lendaro, A. Masi, M. Pari, J. Prieto, R. Rossi, W. Scandale, R. Seidenbinder, P. Serrano Galvez, L.S. Stoel, F.M. Velotti, V. Zhovkovska
CERN, Meyrin, Switzerland
F.M. Addesa, F. Iacoangeli
INFN-Roma, Roma, Italy
A.G. Afonin, Y.A. Chesnokov, A.A. Durum, V.A. Maisheev, Yu.E. Sandomirskiy, A.A. Yanovich
IHEP, Moscow Region, Russia
J.E. Borg, M. Garattini, G. Hall, T. James, M. Pesaresi
Imperial College of Science and Technology, Department of Physics, London, United Kingdom
A.S. Denisov, Y. Gavrikov, Yu.M. Ivanov, M.A. Koznov, L.G. Malyarenko, V. Skorobogatov
PNPI, Gatchina, Leningrad District, Russia
F. Galluccio
INFN-Napoli, Napoli, Italy
A.D. Kovalenko, A.M. Taratin
JINR, Dubna, Moscow Region, Russia
F. Murtas
INFN/LNF, Frascati, Italy
A. Natochii
LAL, Orsay, France

The use of a bent crystal was investigated in order to reduce the losses at the CERN Super Proton Synchrotron (SPS) electrostatic septa (ZS) during the slow extraction of 400 GeV protons toward the North Area. The crystal, installed a few meters upstream the ZS, bends protons that would otherwise impinge on the ZS wires. Since particle deflection with good efficiency is achieved only when the crystal lattice is aligned within ~10 urad to the trajectory of the particles (at p = 400 GeV/c), a compact goniometer was built to allow the correct angular alignment of the crystal with respect to the incoming beam with a precision of few urad. In this paper, we report on the crystal features measured during a dedicated beam test by the UA9 experimental installation in the CERN H8 beam line. Details of the goniometer and its installation are also reported. The first results achieved during dedicated Machine Development (MD) sessions are finally presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP028

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP040

Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers

2418

C. Wiesner, W. Bartmann, C. Bracco, M. Calviani, E. Carlier, L. Ducimetière, M.I. Frankl, M.A. Fraser, S.S. Gilardoni, B. Goddard, V. Gomes Namora, T. Kramer, A. Lechner, N. Magnin, M. Meddahi, A. Perillo-Marcone, T. Polzin, L.C. Richtmann, V. Rizzoglio, V. Senaj, J.A.F. Somoza, D. Wollmann
CERN, Meyrin, Switzerland

The LHC Beam Dump System is required to safely dispose of the energy of the stored beam. In order to reduce the energy density deposited in the beam dump, a dedicated dilution system is installed. On July 14, 2018, during a regular beam dump at 6.5 TeV beam energy, a high-voltage flashover of two vertical dilution kickers was observed, leading to a voltage breakdown and reduced dilution in the vertical plane. It was the first incident of this type since the start of LHC beam operation. In this paper, the flashover event is described and the implications analysed. Circuit simulations of the current in the magnet coil as well as simulations of the resulting beam sweep pattern are presented and compared with the measurements. The criticality of the event is assessed and implications for future failure scenarios are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP040

About •

paper received ※ 14 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXXPLM2

Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction

3399

F.M. Velotti, P. Bestmann, M.E.J. Butcher, M. Calviani, M. Di Castro, M. Donzé, L.S. Esposito, M.A. Fraser, M. Garattini, S.S. Gilardoni, B. Goddard, V. Kain, J. Lendaro, A. Masi, D. Mirarchi, M. Pari, J. Prieto, S. Redaelli, R. Rossi, W. Scandale, R. Seidenbinder, P. Serrano Galvez, L.S. Stoel, C. Zamantzas, V. Zhovkovska
CERN, Meyrin, Switzerland
F.M. Addesa, F. Iacoangeli
INFN-Roma, Roma, Italy
A.G. Afonin, Y.A. Chesnokov, A.A. Durum, V.A. Maisheev, Yu.E. Sandomirskiy, A.A. Yanovich
IHEP, Moscow Region, Russia
J.E. Borg, M. Garattini, G. Hall, T. James, M. Pesaresi
Imperial College of Science and Technology, Department of Physics, London, United Kingdom
A.S. Denisov, Y. Gavrikov, Yu.M. Ivanov, M.A. Koznov, L.G. Malyarenko, V. Skorobogatov
PNPI, Gatchina, Leningrad District, Russia
F. Galluccio
INFN-Napoli, Napoli, Italy
F. Murtas
INFN/LNF, Frascati, Italy

A proof-of-principle experiment demonstrating the feasibility of using a thin, bent crystal aligned upstream of an extraction septum (ES) to increase the efficiency of the third-integer resonant slow extraction process has been carried out at the CERN Super Proton Synchrotron (SPS). With the primary aim of reducing the beam loss and induced radio-activation of the SPS, the crystal was aligned to both the beam and the septum to reduce by up to 40% the beam intensity impinging the ES and increase the intensity entering the external transfer line. In this contribution, we introduce the concept and the prototype system that was installed in 2018 before reporting in detail on the dedicated program of machine development studies carried out to characterise its performance and demonstrate operational feasibility. The performance reach and compatibility with other loss reduction techniques proposed to further increase the extraction efficiency, such as phase space folding with octupoles, is discussed in view of future high intensity operation.

Slides THXXPLM2 [1.397 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THXXPLM2

About •

paper received ※ 15 May 2019 paper accepted ※ 28 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)