Author: Burkart, F.
Paper Title Page
MOPMP037 Updated High-Energy LHC Design 524
 
  • F. Zimmermann, D. Amorim, S.A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, J. Keintzel, R. Kersevan, V. Mertens, J. Molson, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
    CERN, Geneva, Switzerland
  • J.L. Abelleira, A. Abramov, E. Cruz Alaniz, H. Pikhartova, A. Seryi, L. van Riesen-Haupt
    JAI, Oxford, United Kingdom
  • A. Apyan
    ANSL, Yerevan, Armenia
  • J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
    EPFL, Lausanne, Switzerland
  • F. Burkart
    DESY, Hamburg, Germany
  • Y. Cai, Y.M. Nosochkov
    SLAC, Menlo Park, California, USA
  • G. Guillermo Cantón
    CINVESTAV, Mérida, Mexico
  • K. Ohmi, K. Oide, D. Zhou
    KEK, Ibaraki, Japan
 
  Funding: This work was supported in part by the European Commission under the HORIZON 2020 project ARIES no.730871, and by the Swiss Accelerator Research and Technology collaboration CHART.
We present updated design parameters for a future High-Energy LHC. A more realistic turnaround time has led to a revision of the target peak luminosity, as well as a choice of a larger IP beta function, and longer physics fills. Pushed parameters of the Nb3Sn superconducting cable together with a modified layout of the 16 T dipole magnets resulted in revised field errors, updated dynamic-aperture simulations, and an associated re-evaluation of injector options. Collimators in the dispersion suppressors help achieve satisfactory cleaning performance. Longitudinal beam parameters ensure beam stability throughout the cycle. Intrabeam scattering rates and Touschek lifetime appear benign.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP037  
About • paper received ※ 10 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPTS014 The Experimental Area at the ARES LINAC 867
 
  • F. Burkart, R.W. Aßmann, U. Dorda, J. Hauser, S. Lederer, F. Lemery, B. Marchetti, F. Mayet, E. Panofski, P. Wiesener
    DESY, Hamburg, Germany
  • M. Trunk
    University of Hamburg, Hamburg, Germany
 
  The ARES (Accelerator Research Experiment at SINBAD) linac at the accelerator R&D facility SINBAD (Short innovative bunches and accelerators at DESY) will drive multiple independent experiments including the acceleration of ultrashort electron bunches. In addition the linac will host an experimental area, open for transnational access, to study advanced high gradient, laser driven, acceleration concepts, like the ones studied within the ACHIP (accelerator on a chip) project. The area will be operational mid-2019. This paper will report on the current status of the experimental area, including hardware parameters, beam optics, achievable beam parameters, design of the experimental chamber and commissioning plans. The modification plans for a micro-bunching experiment in the frame of the ACHIP experiment and future upgrade plans will be shown and discussed in detail.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS014  
About • paper received ※ 14 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPTS026 Status Report of the SINBAD-ARES RF Photoinjector and LINAC Commissioning 906
 
  • E. Panofski, R.W. Aßmann, F. Burkart, U. Dorda, K. Flöttmann, M. Hüning, B. Marchetti, D. Marx, F. Mayet, P.A. Walker, S. Yamin
    DESY, Hamburg, Germany
 
  The accelerator R&D facility SINBAD (Short innovative bunches and accelerators at DESY) will drive multiple independent experiments including the acceleration of ultrashort electron bunches and the test of advanced high gradient acceleration concepts. The SINBAD-ARES (Accelerator Research Experiment at SINBAD) setup hosts a normal conducting RF photoinjector generating a low charge electron beam that is afterwards accelerated to 100 MeV by an S-band linac section. The linac as well as a magnetic chicane allow the production of ultrashort pulses with an excellent arrival-time stability. The high brightness beam has then the potential to serve as a test beam for next generation compact acceleration schemes. The setup of the SINBAD-ARES facility will proceed in stages. We report on the current status of the ARES RF gun and linac commissioning.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS026  
About • paper received ※ 22 April 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPRB008 LUXE - a QED Experiment at the European XFEL 1694
 
  • F. Burkart, R.W. Aßmann, R. Brinkmann, W. Decking, N. Golubeva, B. Heinemann, M. Hüning, J. List, M. Wing
    DESY, Hamburg, Germany
  • M. Wing
    UCL, London, United Kingdom
 
  The proposed experiment aims to measure QED in the presence of strong fields and above the Schwinger critical field. An experiment is being considered at the European XFEL, which should be able to measure non-perturbative QED and its transition from the perturbative regime. This paper presents the current status of the LUXE (Laser und XFEL Experiment) design study. First layout considerations; accelerator beam line design, electron and laser beam parameters, radioprotection issues and first results of the start to end simulations will be presented and discussed in detail. An outlook concerning the implementation into the XFEL schedule and timeline of this experiment will be given.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB008  
About • paper received ※ 14 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPGW011 Development of a Silicon Strip Detector for Novel Accelerators at Sinbad 2487
 
  • S. Jaster-Merz, R.W. Aßmann, F. Burkart, U. Dorda, U. Kraemer, E. Panofski, M. Stanitzki
    DESY, Hamburg, Germany
 
  At the SINBAD facility (DESY Hamburg), novel particle acceleration techniques like dielectric laser acceleration (DLA) structures will be tested using the ARES linac. Due to the small size of these structures, the accelerated electron beams only have a very low (sub-pC) charge. To determine the energy distribution of these beams, a silicon strip detector for the ARES linac spectrometer is currently under development. This detector fulfils the requirements of high spatial resolution for low charge density beams. The detector consists of two 1 cm x 1 cm silicon strip sensors and readout components. The design of the detector, its components and an estimate of its behaviour for a specific electron beam distribution are presented and discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW011  
About • paper received ※ 17 April 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPGW011 Commissioning-Stages and Radio-Protection Concept for the THz-Linac Based Accelerator "AXSIS" at DESY 3598
 
  • F. Burkart, R.W. Aßmann, U. Dorda, B. Marchetti
    DESY, Hamburg, Germany
  • F.X. Kärtner, N.H. Matlis, T. Rohwer
    CFEL, Hamburg, Germany
 
  The dedicated accelerator R&D facility SINBAD at DESY hosts the AXSIS accelerator. This project is funded by the European Research Council to develop a compact source for attosecond serial X-ray crystallography and spectroscopy. For that purpose, in one of the arcs of the SINBAD facility and the neighboring laser labs, an accelerator research site is being constructed where a fully THz-driven accelerator (electron gun and linac, < 30MeV) will be installed. The current status of the hardware installation of the electron beam accelerator is presented. Furthermore, the required radio-protection measures and maximum beam parameters are presented. In this contribution the commissioning plans and the staging of the beam operation for the accelerator complex will be shown and discussed in detail.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW011  
About • paper received ※ 14 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPGW015 Proposed Beam Test of a Transverse Gradient Undulator at the SINBAD Facility at DESY 3609
 
  • R. Rossmanith, A. Bernhard, K. Damminsek, J. Gethmann, S. Richter
    KIT, Karlsruhe, Germany
  • R.W. Aßmann, F. Burkart, U. Dorda, F. Jafarinia, B. Marchetti
    DESY, Hamburg, Germany
  • M. Kaluza
    IOQ, Jena, Germany
 
  While Laser Plasma Accelerators produce beams with the high output energy required for FELs, up to now the relatively high energy spread has prohibited FEL lasing. Therefore it was proposed to replace the normal FEL undulators by Transverse Gradient Undulators (TGUs). For a first, small scale test of the TGU concept, a 40 period prototype high gradient superconductive TGU was built at KIT and will be tested with beam at the ARES-linac in the new accelerator test facility SINBAD (Short Innovative Bunches and Accelerators at Desy) at DESY. The proposed tests are summarized in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPGW015  
About • paper received ※ 07 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)