IPAC2019 - List of Authors (Biancacci, N.)

Paper	Title	Page
MOPRB052	Gamma Factory at CERN: Design of a Proof-of-Principle Experiment	685
	Y. Dutheil, R. Alemany-Fernández, H. Bartosik, N. Biancacci, R. Bruce, P. Czodrowski, V. Fedosseev, B. Goddard, S. Hirlaender, J.M. Jowett, R. Kersevan, M. Kowalska, M. Lamont, D. Manglunki, J. Molson, A.V. Petrenko, M. Schaumann, F. Zimmermann CERN, Meyrin, Switzerland S.E. Alden, A. Bosco, S.M. Gibson, L.J. Nevay JAI, Egham, Surrey, United Kingdom A. Apyan ANSL, Yerevan, Armenia E.G. Bessonov LPI, Moscow, Russia A. Bosco, S.M. Gibson, L.J. Nevay Royal Holloway, University of London, Surrey, United Kingdom F. Castelli Università degli Studi di Milano, Milano, Italy F. Castelli, C. Curatolo, L. Serafini INFN-Milano, Milano, Italy K. Kroeger FSU Jena, Jena, Germany A. Martens LAL, Orsay, France V. Petrillo Universita’ degli Studi di Milano, Milano, Italy M. Sapinski, T. Stöhlker GSI, Darmstadt, Germany G. Weber IOQ, Jena, Germany Y.K. Wu FEL/Duke University, Durham, North Carolina, USA
	The Gamma Factory (GF) initiative proposes to create novel research tools at CERN by producing, accelerating and storing highly relativistic partially stripped ion beams in the LHC rings and by exciting their atomic degrees of freedom by lasers, to produce high-energy photon beams. Their intensity would be several orders of magnitude higher than those of the presently operating light sources in the particularly interesting gamma-ray energy domain reaching up to 400 MeV. In this energy domain, the high-intensity photon beams can be used to produce secondary beams of polarized electrons, polarized positrons, polarized muons, neutrinos, neutrons and radioactive ions. Over the years 2017-2018 we have demonstrated that these partially stripped ion beams can be successfully produced, accelerated and stored in the CERN accelerator complex, including the LHC. The next step of the project is to build a proof of principle experiment in the SPS to validate the principal GF concepts. This contribution will present the initial conceptual design of this experiment along with its main challenge - the demonstration of the fast cooling method of partially stripped ion beams.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB052
About •	paper received ※ 19 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYPLS1	Building the Impedance Model of a Real Machine	2249
	B. Salvant, D. Amorim, S.A. Antipov, S. Arsenyev, M.S. Beck, N. Biancacci, O.S. Brüning, J.V. Campelo, E. Carideo, F. Caspers, A. Farricker, A. Grudiev, T. Kaltenbacher, E. Koukovini-Platia, P. Kramer, A. Lasheen, M. Migliorati, N. Mounet, E. Métral, N. Nasr Esfahani, S. Persichelli, B.K. Popovic, T.L. Rijoff, G. Rumolo, E.N. Shaposhnikova, V.G. Vaccaro, C. Vollinger, N. Wang, C. Zannini, B. Zotter CERN, Meyrin, Switzerland D. Amorim Grenoble-INP Phelma, Grenoble, France T. Dalascu EPFL, Lausanne, Switzerland M. Migliorati Sapienza University of Rome, Rome, Italy R. Nagaoka SOLEIL, Gif-sur-Yvette, France V.V. Smaluk BNL, Upton, Long Island, New York, USA B. Spataro INFN/LNF, Frascati, Italy N. Wang IHEP, Beijing, People’s Republic of China S.M. White ESRF, Grenoble, France
	A reliable impedance model of a particle accelerator can be built by combining the beam coupling impedances of all the components. This is a necessary step to be able to evaluate the machine performance limitations, identify the main contributors in case an impedance reduction is required, and study the interaction with other mechanisms such as optics nonlinearities, transverse damper, noise, space charge, electron cloud, beam-beam (in a collider). The main phases to create a realistic impedance model, and verify it experimentally, will be reviewed, highlighting the main challenges. Some examples will be presented revealing the levels of precision of machine impedance models that have been achieved.
	Slides WEYPLS1 [5.648 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYPLS1
About •	paper received ※ 10 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS040	Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex	3188
	S. Hirlaender ATI, Vienna, Austria H. Bartosik, G. Bellodi, N. Biancacci, V. Kain, Á. Saá Hernández, R. Scrivens CERN, Geneva, Switzerland
	High intensities in the CERN Low Energy Ion Ring (LEIR) are achieved by stacking several multi-turn injections from the pre-accelerator LINAC3. Up to seven consecutive 200 μs long, 200 ms spaced pulses are injected from LINAC3 into LEIR. An inclined septum magnet combined with a collapsing horizontal orbit bump allows a 6-D phase space painting via a linearly ramped mean momentum along with the LINAC3 pulse and injection at high dispersion. The injected energy distribution measured by the LEIR longitudinal Schottky is correlated with the obtained injection efficiency in this paper. Studies in 2018 revealed that the achievable accumulated intensity of LEIR strongly depends on the longitudinal distribution from LINAC3, which does not stay constant. This paper summarises the experimental results and means to further improve reproducibility and high injection efficiency.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS040
About •	paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS042	Detailed Characterisation of the LEIR Intensity Limitations for a Pb Ion Beam	3196
	Á. Saá Hernández, H. Bartosik, N. Biancacci, S. Hirlaender, D. Moreno Garcia, M. Zampetakis CERN, Geneva, Switzerland
	The equilibrium emittance of the Pb beam in the CERN Low Energy Ion Ring (LEIR) results from the interplay of electron cooling and heating processes, as intra-beam scattering and space charge. In this paper we present the measurements of the emittance evolution as a function of intensity, working point and resonance excitation, and compare them with the simulations of the heating processes. Optimum settings for normal and skew sextupoles have been found for the compensation of resonances excited by the lattice.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS042
About •	paper received ※ 18 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Gamma Factory at CERN: Design of a Proof-of-Principle Experiment

685

Y. Dutheil, R. Alemany-Fernández, H. Bartosik, N. Biancacci, R. Bruce, P. Czodrowski, V. Fedosseev, B. Goddard, S. Hirlaender, J.M. Jowett, R. Kersevan, M. Kowalska, M. Lamont, D. Manglunki, J. Molson, A.V. Petrenko, M. Schaumann, F. Zimmermann
CERN, Meyrin, Switzerland
S.E. Alden, A. Bosco, S.M. Gibson, L.J. Nevay
JAI, Egham, Surrey, United Kingdom
A. Apyan
ANSL, Yerevan, Armenia
E.G. Bessonov
LPI, Moscow, Russia
A. Bosco, S.M. Gibson, L.J. Nevay
Royal Holloway, University of London, Surrey, United Kingdom
F. Castelli
Università degli Studi di Milano, Milano, Italy
F. Castelli, C. Curatolo, L. Serafini
INFN-Milano, Milano, Italy
K. Kroeger
FSU Jena, Jena, Germany
A. Martens
LAL, Orsay, France
V. Petrillo
Universita’ degli Studi di Milano, Milano, Italy
M. Sapinski, T. Stöhlker
GSI, Darmstadt, Germany
G. Weber
IOQ, Jena, Germany
Y.K. Wu
FEL/Duke University, Durham, North Carolina, USA

The Gamma Factory (GF) initiative proposes to create novel research tools at CERN by producing, accelerating and storing highly relativistic partially stripped ion beams in the LHC rings and by exciting their atomic degrees of freedom by lasers, to produce high-energy photon beams. Their intensity would be several orders of magnitude higher than those of the presently operating light sources in the particularly interesting gamma-ray energy domain reaching up to 400 MeV. In this energy domain, the high-intensity photon beams can be used to produce secondary beams of polarized electrons, polarized positrons, polarized muons, neutrinos, neutrons and radioactive ions. Over the years 2017-2018 we have demonstrated that these partially stripped ion beams can be successfully produced, accelerated and stored in the CERN accelerator complex, including the LHC. The next step of the project is to build a proof of principle experiment in the SPS to validate the principal GF concepts. This contribution will present the initial conceptual design of this experiment along with its main challenge - the demonstration of the fast cooling method of partially stripped ion beams.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB052

About •

paper received ※ 19 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYPLS1

Building the Impedance Model of a Real Machine

2249

B. Salvant, D. Amorim, S.A. Antipov, S. Arsenyev, M.S. Beck, N. Biancacci, O.S. Brüning, J.V. Campelo, E. Carideo, F. Caspers, A. Farricker, A. Grudiev, T. Kaltenbacher, E. Koukovini-Platia, P. Kramer, A. Lasheen, M. Migliorati, N. Mounet, E. Métral, N. Nasr Esfahani, S. Persichelli, B.K. Popovic, T.L. Rijoff, G. Rumolo, E.N. Shaposhnikova, V.G. Vaccaro, C. Vollinger, N. Wang, C. Zannini, B. Zotter
CERN, Meyrin, Switzerland
D. Amorim
Grenoble-INP Phelma, Grenoble, France
T. Dalascu
EPFL, Lausanne, Switzerland
M. Migliorati
Sapienza University of Rome, Rome, Italy
R. Nagaoka
SOLEIL, Gif-sur-Yvette, France
V.V. Smaluk
BNL, Upton, Long Island, New York, USA
B. Spataro
INFN/LNF, Frascati, Italy
N. Wang
IHEP, Beijing, People’s Republic of China
S.M. White
ESRF, Grenoble, France

A reliable impedance model of a particle accelerator can be built by combining the beam coupling impedances of all the components. This is a necessary step to be able to evaluate the machine performance limitations, identify the main contributors in case an impedance reduction is required, and study the interaction with other mechanisms such as optics nonlinearities, transverse damper, noise, space charge, electron cloud, beam-beam (in a collider). The main phases to create a realistic impedance model, and verify it experimentally, will be reviewed, highlighting the main challenges. Some examples will be presented revealing the levels of precision of machine impedance models that have been achieved.

Slides WEYPLS1 [5.648 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYPLS1

About •

paper received ※ 10 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS040

Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex

3188

S. Hirlaender
ATI, Vienna, Austria
H. Bartosik, G. Bellodi, N. Biancacci, V. Kain, Á. Saá Hernández, R. Scrivens
CERN, Geneva, Switzerland

High intensities in the CERN Low Energy Ion Ring (LEIR) are achieved by stacking several multi-turn injections from the pre-accelerator LINAC3. Up to seven consecutive 200 μs long, 200 ms spaced pulses are injected from LINAC3 into LEIR. An inclined septum magnet combined with a collapsing horizontal orbit bump allows a 6-D phase space painting via a linearly ramped mean momentum along with the LINAC3 pulse and injection at high dispersion. The injected energy distribution measured by the LEIR longitudinal Schottky is correlated with the obtained injection efficiency in this paper. Studies in 2018 revealed that the achievable accumulated intensity of LEIR strongly depends on the longitudinal distribution from LINAC3, which does not stay constant. This paper summarises the experimental results and means to further improve reproducibility and high injection efficiency.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS040

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS042

Detailed Characterisation of the LEIR Intensity Limitations for a Pb Ion Beam

3196

Á. Saá Hernández, H. Bartosik, N. Biancacci, S. Hirlaender, D. Moreno Garcia, M. Zampetakis
CERN, Geneva, Switzerland

The equilibrium emittance of the Pb beam in the CERN Low Energy Ion Ring (LEIR) results from the interplay of electron cooling and heating processes, as intra-beam scattering and space charge. In this paper we present the measurements of the emittance evolution as a function of intensity, working point and resonance excitation, and compare them with the simulations of the heating processes. Optimum settings for normal and skew sextupoles have been found for the compensation of resonances excited by the lattice.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS042

About •

paper received ※ 18 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)