Author: Benedikt, M.
Paper Title Page
MOPMP037 Updated High-Energy LHC Design 524
 
  • F. Zimmermann, D. Amorim, S.A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, J. Keintzel, R. Kersevan, V. Mertens, J. Molson, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
    CERN, Geneva, Switzerland
  • J.L. Abelleira, A. Abramov, E. Cruz Alaniz, H. Pikhartova, A. Seryi, L. van Riesen-Haupt
    JAI, Oxford, United Kingdom
  • A. Apyan
    ANSL, Yerevan, Armenia
  • J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
    EPFL, Lausanne, Switzerland
  • F. Burkart
    DESY, Hamburg, Germany
  • Y. Cai, Y.M. Nosochkov
    SLAC, Menlo Park, California, USA
  • G. Guillermo Cantón
    CINVESTAV, Mérida, Mexico
  • K. Ohmi, K. Oide, D. Zhou
    KEK, Ibaraki, Japan
  
  Funding: This work was supported in part by the European Commission under the HORIZON 2020 project ARIES no.730871, and by the Swiss Accelerator Research and Technology collaboration CHART.
We present updated design parameters for a future High-Energy LHC. A more realistic turnaround time has led to a revision of the target peak luminosity, as well as a choice of a larger IP beta function, and longer physics fills. Pushed parameters of the Nb3Sn superconducting cable together with a modified layout of the 16 T dipole magnets resulted in revised field errors, updated dynamic-aperture simulations, and an associated re-evaluation of injector options. Collimators in the dispersion suppressors help achieve satisfactory cleaning performance. Longitudinal beam parameters ensure beam stability throughout the cycle. Intrabeam scattering rates and Touschek lifetime appear benign. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP037  
About • paper received ※ 10 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPMP033 Slow Extraction Loss Reduction With Octupoles at the CERN SPS 2399
 
  • L.S. Stoel, H. Bartosik, M. Benedikt, M.A. Fraser, B. Goddard, V. Kain, F.M. Velotti
    CERN, Meyrin, Switzerland
  
  The powering of octupoles during third-integer resonant slow extraction has been studied and recently tested with beam at the CERN Super Proton Synchrotron (SPS) in order to increase the extraction efficiency and reduce the induced radioactivity of the extraction straight. The octupoles distort the particle trajectories in phase space in such a way that the extracted separatrix is folded, which decreases the particle density impinging the wires of the extraction septum at the expense of increasing the extracted beam emittance. During experimental SPS machine studies a reduction of over 40% in the specific (per extracted proton) beam loss measured at the extraction septum was demonstrated. In this paper, the prerequisite studies needed to safely but efficiently deploy the new extraction scheme in a limited time-frame are described, the experimental results are presented and an outlook is given towards the next steps to bring slow extraction with octupoles into routine operation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP033  
About • paper received ※ 14 May 2019       paper accepted ※ 23 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)