IPAC2019 - List of Authors (Bellodi, G.)

Paper	Title	Page
MOPTS096	Linac4: Reliability Run Results and Source Extraction Studies	1090
	D. Noll, G. Bellodi, S.B. Bertolo, F.D.L. Di Lorenzo, J.-B. Lallement, J. Lettry, A.M. Lombardi, C.M. Mastrostefano, B. Mikulec, M. O’Neil, S. Schuh, R. Wegner CERN, Geneva, Switzerland
	Linac4, a 160 MeV, 352.2 MHz linear accelerator, has been fully commissioned and will take its place as new injector to the CERN chain of accelerators during the long shutdown (LS2) in 2019-2020. In the past year, it has been continuously providing beam during a test run to assess its reliability in view of the connection to the LHC injector chain. The target reliability of more than 90% has been demonstrated during the accumulated nine months of run in 2017 and 2018. The beam quality at 160 MeV is suitable for producing all beams for the CERN physics program of today. Nevertheless, the limited peak current of 30mA might be a limitation for future high intensity programs. The bottleneck has been identified at the low energy end of the accelerator. In the meantime, beam extraction and low energy beam transport studies are ongoing at a dedicated test stand with the goal to reach beam currents from the pre-injector up to 45 mA. We will present the status of the modelling of the pre-injector and possible solutions to reach higher beam currents from the RFQ along with results from the reliability run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS096
About •	paper received ※ 30 April 2019 paper accepted ※ 19 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS040	Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex	3188
	S. Hirlaender ATI, Vienna, Austria H. Bartosik, G. Bellodi, N. Biancacci, V. Kain, Á. Saá Hernández, R. Scrivens CERN, Geneva, Switzerland
	High intensities in the CERN Low Energy Ion Ring (LEIR) are achieved by stacking several multi-turn injections from the pre-accelerator LINAC3. Up to seven consecutive 200 μs long, 200 ms spaced pulses are injected from LINAC3 into LEIR. An inclined septum magnet combined with a collapsing horizontal orbit bump allows a 6-D phase space painting via a linearly ramped mean momentum along with the LINAC3 pulse and injection at high dispersion. The injected energy distribution measured by the LEIR longitudinal Schottky is correlated with the obtained injection efficiency in this paper. Studies in 2018 revealed that the achievable accumulated intensity of LEIR strongly depends on the longitudinal distribution from LINAC3, which does not stay constant. This paper summarises the experimental results and means to further improve reproducibility and high injection efficiency.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS040
About •	paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXPLM1	LHC Injectors Upgrade Project: Towards New Territory Beam Parameters	3385
	M. Meddahi, R. Alemany-Fernández, H. Bartosik, G. Bellodi, J. Coupard, H. Damerau, G.P. Di Giovanni, F.B. Dos Santos Pedrosa, A. Funken, B. Goddard, K. Hanke, A. Huschauer, V. Kain, A.M. Lombardi, B. Mikulec, S. Prodon, G. Rumolo, R. Scrivens, E.N. Shaposhnikova CERN, Geneva, Switzerland
	The LHC injectors Upgrade (LIU) project aims at increasing the intensity and brightness in the LHC injectors in order to match the challenging requirements of the High-Luminosity LHC (HL-LHC) project, while ensuring high availability and reliable operation of the injectors complex up to the end of the HL-LHC era (ca. 2035). This requires extensive hardware modifications and new beam dynamics solutions in the entire LHC proton and ion injection chains: the new Linac4, the Proton Synchrotron Booster, the Proton Synchrotron the Super Proton Synchrotron together with the ion PS injectors (the Linac3 and the Low Energy Ion Ring). All hardware modifications will be implemented during the 2019-2020 CERN accelerators shutdown. This talk would analyze the various project phases, share the lessons learned, and conclude on the expected beam parameter reach, together with the related risks.
	Slides THXPLM1 [20.029 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THXPLM1
About •	paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Linac4: Reliability Run Results and Source Extraction Studies

1090

D. Noll, G. Bellodi, S.B. Bertolo, F.D.L. Di Lorenzo, J.-B. Lallement, J. Lettry, A.M. Lombardi, C.M. Mastrostefano, B. Mikulec, M. O’Neil, S. Schuh, R. Wegner
CERN, Geneva, Switzerland

Linac4, a 160 MeV, 352.2 MHz linear accelerator, has been fully commissioned and will take its place as new injector to the CERN chain of accelerators during the long shutdown (LS2) in 2019-2020. In the past year, it has been continuously providing beam during a test run to assess its reliability in view of the connection to the LHC injector chain. The target reliability of more than 90% has been demonstrated during the accumulated nine months of run in 2017 and 2018. The beam quality at 160 MeV is suitable for producing all beams for the CERN physics program of today. Nevertheless, the limited peak current of 30mA might be a limitation for future high intensity programs. The bottleneck has been identified at the low energy end of the accelerator. In the meantime, beam extraction and low energy beam transport studies are ongoing at a dedicated test stand with the goal to reach beam currents from the pre-injector up to 45 mA. We will present the status of the modelling of the pre-injector and possible solutions to reach higher beam currents from the RFQ along with results from the reliability run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS096

About •

paper received ※ 30 April 2019 paper accepted ※ 19 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS040

Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex

3188

S. Hirlaender
ATI, Vienna, Austria
H. Bartosik, G. Bellodi, N. Biancacci, V. Kain, Á. Saá Hernández, R. Scrivens
CERN, Geneva, Switzerland

High intensities in the CERN Low Energy Ion Ring (LEIR) are achieved by stacking several multi-turn injections from the pre-accelerator LINAC3. Up to seven consecutive 200 μs long, 200 ms spaced pulses are injected from LINAC3 into LEIR. An inclined septum magnet combined with a collapsing horizontal orbit bump allows a 6-D phase space painting via a linearly ramped mean momentum along with the LINAC3 pulse and injection at high dispersion. The injected energy distribution measured by the LEIR longitudinal Schottky is correlated with the obtained injection efficiency in this paper. Studies in 2018 revealed that the achievable accumulated intensity of LEIR strongly depends on the longitudinal distribution from LINAC3, which does not stay constant. This paper summarises the experimental results and means to further improve reproducibility and high injection efficiency.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS040

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXPLM1

LHC Injectors Upgrade Project: Towards New Territory Beam Parameters

3385

M. Meddahi, R. Alemany-Fernández, H. Bartosik, G. Bellodi, J. Coupard, H. Damerau, G.P. Di Giovanni, F.B. Dos Santos Pedrosa, A. Funken, B. Goddard, K. Hanke, A. Huschauer, V. Kain, A.M. Lombardi, B. Mikulec, S. Prodon, G. Rumolo, R. Scrivens, E.N. Shaposhnikova
CERN, Geneva, Switzerland

The LHC injectors Upgrade (LIU) project aims at increasing the intensity and brightness in the LHC injectors in order to match the challenging requirements of the High-Luminosity LHC (HL-LHC) project, while ensuring high availability and reliable operation of the injectors complex up to the end of the HL-LHC era (ca. 2035). This requires extensive hardware modifications and new beam dynamics solutions in the entire LHC proton and ion injection chains: the new Linac4, the Proton Synchrotron Booster, the Proton Synchrotron the Super Proton Synchrotron together with the ion PS injectors (the Linac3 and the Low Energy Ion Ring). All hardware modifications will be implemented during the 2019-2020 CERN accelerators shutdown. This talk would analyze the various project phases, share the lessons learned, and conclude on the expected beam parameter reach, together with the related risks.

Slides THXPLM1 [20.029 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THXPLM1

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)