IPAC2019 - List of Authors (Beller, A.)

Paper	Title	Page
WEPGW004	Wire Scanner for High Intensity Ion Beam*	2466
SUSPFO007	use link to see paper's listing under its alternate paper code
	A. Beller, D. Bondoux, F. Bouly LPSC, Grenoble Cedex, France
	Funding: Part of this work supported by the European Atomic Energy Community (EURATOM) H₂020 Program under grant agreement n°662186 (MYRTE project). The goal of the project is to develop a Wire-Scanner compatible with low energy - high intensity ion beams and adaptable to various beam chamber diameters. The purpose is to obtain the 2D beam profile by passing measurement wires through the beam. Thanks to a high speed passage of measurement wires, it allows to avoid "disrupting" the beam passage, and can be considered as a non-destructive diagnosis. Wires heating and measuring issues have been solved by using tungsten wires kept in tension by a mechanical system. All driving and signal measurements are performed by a PXI based system. The synchronization of the measurements is guaranteed by an analog input board recovering the wires current and the translator position, the latter being carried out by a laser sensor. Besides this technological aspect, an optimization algorithm for beam profile reconstruction from measured data under Gaussian hypothesis has been developed. The standalone system and first experimental results are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW004
About •	paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

WEPGW004

Wire Scanner for High Intensity Ion Beam*

2466

SUSPFO007

use link to see paper's listing under its alternate paper code

A. Beller, D. Bondoux, F. Bouly
LPSC, Grenoble Cedex, France

Funding: Part of this work supported by the European Atomic Energy Community (EURATOM) H₂020 Program under grant agreement n°662186 (MYRTE project).
The goal of the project is to develop a Wire-Scanner compatible with low energy - high intensity ion beams and adaptable to various beam chamber diameters. The purpose is to obtain the 2D beam profile by passing measurement wires through the beam. Thanks to a high speed passage of measurement wires, it allows to avoid "disrupting" the beam passage, and can be considered as a non-destructive diagnosis. Wires heating and measuring issues have been solved by using tungsten wires kept in tension by a mechanical system. All driving and signal measurements are performed by a PXI based system. The synchronization of the measurements is guaranteed by an analog input board recovering the wires current and the translator position, the latter being carried out by a laser sensor. Besides this technological aspect, an optimization algorithm for beam profile reconstruction from measured data under Gaussian hypothesis has been developed. The standalone system and first experimental results are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW004

About •

paper received ※ 13 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)