| Paper | Title | Page |
|---|---|---|
| TUPGW097 | Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source | 1639 |
|
||
|
Funding: This work was supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The ALS-U project to upgrade the Advanced Light Source to a multi bend achromat lattice received CD-1 approval in 2018 marking the end of its conceptual design phase. The ALS-U design promises to deliver diffraction limited performance in the soft x-ray range by lowering the horizontal emittance to about 70 pm rad resulting in two orders of magnitude brightness increase for soft x-rays compared to the current ALS. The design utilizes a nine bend achromat lattice, with reverse bending magnets and on-axis swap-out injection utilizing an accumulator ring. This paper presents recent design progress of the accelerator, as well as new results of the mature R&D program. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW097 | |
| About • | paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPRB080 | Optimization of RF Cavities Using MOGA for ALS-U | 3007 |
|
||
|
Funding: Director of Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 A multi-objective genetic algorithm-based optimiza-tion process has been applied to optimize the RF design of a 500 MHz main cavity and a 1.5 GHz Higher Harmon-ic Cavity (HHC) for the Advanced Light Source upgrade (ALS-U) in Lawrence Berkeley National Laboratory (LBNL). For the main cavity, a significant improvement, compared with the existing ALS cavity, has been achieved in cavity shunt impedance and power loss den-sity simultaneously. The field strengths and distribution of the optimized structure are analysed for further re-search. For the HHC, a cavity with low R/Q has been pre-liminary designed to mitigate the beam instability. This study also serves as an example of how a genetic algo-rithm can be used for optimizing RF cavities. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB080 | |
| About • | paper received ※ 16 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPRB081 | Design Study on Higher Harmonic Cavity for ALS-U | 3011 |
|
||
|
Funding: Director of Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 The ALS upgrade (ALS-U) to a diffraction-limited light source [1] depends on the ability to lengthen the stored bunches to limit the emittance growth and increase the beam life time. Higher harmonic cavities (HHCs), also known as Landau cavities, have been proposed to in-crease beam lifetime and Landau damping by lengthen-ing the bunch. We present an optimized 1.5 GHz normal conducting HHC design for the ALS-U with a supercon-ducting-like geometry using multi-objective genetic algorithm (MOGA) for lower R/Q. The optimization goal is to reach the required shunt impedance while maintain-ing a relatively high Q value of the cavities. To minimize the coupled bunch instabilities, higher-order mode (HOM) of the HHC as well as corresponding impedance are explored and characterized. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB081 | |
| About • | paper received ※ 16 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |